USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
ENGLISH
ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL2738M
ENGLISH
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the
address: http://www.iiyama.com
You can access the Web page of diff erent countries from there.
We reserve the right to change specifi cations without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR
for energy effi ciency.
®
Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ................................................................... 3
CLEANING ...................................................................................... 3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
WALL MOUNTING .......................................................................... 5
BUILT-IN EQUIPMENT ....................................................................5
CONTROLS AND CONNECTORS..................................................6
CONNECTING YOUR MONITOR ...................................................7
COMPUTER SETTING ...................................................................9
OPERATING THE MONITOR .............................................................10
ADJUSTMENT MENU CONTENTS .............................................. 11
POWER MANAGEMENT FEATURE .............................................17
TROUBLE SHOOTING ......................................................................18
RECYCLING INFORMATION .............................................................19
APPENDIX ........................................................................................20
SPECIFICATIONS .........................................................................20
DIMENSIONS ................................................................................21
COMPLIANT TIMING ....................................................................21
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fi re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric
shock.
ENGLISH
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will
cause malfunction and may cause fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
FOR YOUR SAFETY 1
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
ENGLISH
fi re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
REMARK FOR 24/7 USAGE
This product is not specifi cally designed for 24/7 usage in all environments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
2 FOR YOUR SAFETY
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
When you first turn on the LCD monitor, the picture may not fit in the display area
NOTE
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
You may fi nd slightly uneven brightness on the screen depending on the desktop pattern
you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen can be recovered slowly by changing the image or turning off the Power Switch
for some hours.
CUSTOMER SERVICE
If you have to return your unit for service and the original packaging has been
NOTE
discarded, please contact your dealer or iiyama service center for advice or replacement
packaging.
CLEANING
If you drop any materials or liquids such as water into the monitor when cleaning,
WARNING
CAUTION
NOTE
unplug the power cable immediately and contact your dealer or iiyama service center.
For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Thinner
Benzine
Abrasive cleaner
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Spray-type cleaner
Wax
Acid or Alkaline solvent
ENGLISH
CABINET
LCD
SCREEN
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
FOR YOUR SAFETY 3
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 1920 × 1080
2
High Contrast 3000:1 (Typical) / Brightness 300cd/m
Touch panel)
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 3W Stereo Speakers
ENGLISH
Plug & Play VESA DDC2B Compliant
Windows
Power Management (ENERGY STAR
VESA Mounting Standard (200mm×100mm, 100mm×100mm) Compliant
IPX1 Standard Compliant (Only front face)
®
7/8.1/10 Compliant
®
and VESA DPMS Compliant)
(Typical), 255cd/m2 (with
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama offi ce.
Power Cable*
mDP-DP Cable
Safety Guide
CAUTION
4 BEFORE YOU OPERATE THE MONITOR
* TO USERS IN 120V AREA
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a
power supply higher than this rating, then a power cable with a rating of 10A/250V must
be used. However, all guarantees and warranties are void for any problems or damage
caused by a power cable or AC adapter not supplied by iiyama.
An approved power cord greater or equal to H05VVF, 3G, 0.75mm2 must be used.
HDMI Cable
USB Cable
Quick Start Guide
DisplayPort Cable
Cable Cover
WALL MOUNTING
WARNING
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 8mm(VESA mounting
holes) or 8mm(Outer mounting holes) to fasten the monitor. Using the screw longer
than this may cause electric shock or damage because it may contact with the
electrical parts inside the monitor.
BUILT-IN EQUIPMENT
WARNING
This product is not designed for the purpose of being used in high temperature
environment.
If the product is placed in an external cabinet, you need to design cooling fans
and vents to keep the temperature low enough to fit in the product temperature
specifi cation.
Mounting Stage
Screw
ENGLISH
L
Chassis
BEFORE YOU OPERATE THE MONITOR 5
CONTROLS AND CONNECTORS
ENGLISH
<Front> <Back>
Menu Button (MENU)
Scroll Up / Audio Adjust Button ( )
Scroll Down / i-Style Color Button ( )
Select / Input Select Button (ENTER)
Power Switch ( )
Speakers
Power Indicator
NOTE
Blue: Normal operation
Orange: Power Management
USB Connector (USB)
Audio Connector(AUDIO IN)
HDMI Connector (HDMI)
DVI-D Connector (DVI)
DisplayPort Connector (DP)
AC Connector( : Alternating current) (AC POWER IN)
MENU
ENTER
6 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
NOTE
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the Signal Cable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
[Example of Connection]
Power Cable (Accessory)
<Back>
HDMI Cable (Accessory)
USB Cable (Accessory)
Audio Cable (Not included)
DVI-D Cable (Not included)*
ENGLISH
AV Equipment etc.
F
DisplayPort Cable
or
mDP-DP Cable (Accessory)
(Accessory)
Computer
Notebook
* DVI-D cable is not supplied with the monitor. If you use low quality DVI-D cable, it may cause a
result of electro-magnetic interference. Please contact the iiyama Support Centre in your country
if you wish to connect the monitor via the DVI input.
BEFORE YOU OPERATE THE MONITOR 7
[Fitting and Removal of Cable Cover]
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
< Fitting >
Remove the screw from the monitor as
shown in Step1.
Connect the cables, as shown in Step2,
place the cable cover and fi x it fi rmly using a
screw.
Step 1
ENGLISH
Screw
Step 2
< Removal >
Remove the screw and the cable cover as
shown in Step3.
8 BEFORE YOU OPERATE THE MONITOR
Cable Cover
Screw
Step 3
Screw
COMPUTER SETTING
Signal Timing
Change to the desired signal timing listed on page 21: COMPLIANT TIMING.
TOUCH support operation system
Windows8/8.1/10
Windows7
Mac OS/OS X *
Linux Kernel 2.6.38 and above
4
Android *
Functions
Mouse Digitizer Gestures *
2
Click
Drag
Double-Click
Mouse function
Right-Click
Flick
Visual feedback
Mouse & Digitizer
functions
Press & Tap, Rotate,
Zoom-in/out
The other OS Versions not listed are not supported.
: Supported : Not supported
*1 Gestures can be supported by application programs.
2
*
Please download the Mac driver from the following website.
https://www.touch-base.com/oem/weida/
And, please use the "V6" driver for this model.
3
When you install the gesture driver (http://touch-base.com/documentation/Gestures.htm#_
*
Installation_and_running), it can support 2 - 4 fi nger gesture (defi nition be Apple Inc.)
*4 As Android is very divers, check with your device manufacturer if your device supports the touch
function (for software developers; the controller is PID: 2575/ VID: 0402)
*5 Windows XP / Vista are not supported by Microsoft anymore.
6
*
Chrome OS is supported. Chrome OS is auto updating and based on the (latest) Linux kernel.
1
3
*
Remarks
For Mac OS X version 10.6
and above you need a driver.
Works for single touch only.
Kernel 2.6.38 and above
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
OPERATING THE MONITOR
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
1 : E x i t
S e l e c t : 2
Picture Adjust
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 21. You are also able to adjust the picture by following the
button operation shown below.
Press the Button to start the On Screen Display (OSD) feature. There are
additional Menu items which can be switched by using the
ENGLISH
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the
Button. Then, use the / Buttons to highlight the
desired adjustment icon.
Press the
Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Press the
Button to leave the menu, and the settings you just made would be
automatically saved.
For example, to correct for the OSD vertical position, select Menu item of Setup Menu and then
press the
Button. Then, select the OSD Position by using the / Buttons.
1 : E x i t
Picture Adjust
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
S e l e c t : 2
1 : E x i t
Setup Menu
Language Select
OSD Position
OSD Time Out
OSD Background
Opeing Logo
LED
An adjustment page appears after you press the Button. Then, select OSD V.Position by
using the
/ Buttons. Press the Button again. Then, use the / Buttons to change
the OSD vertical position settings. The OSD vertical position of the overall display should be
changing accordingly while you are doing this.
Setup Menu
OSD Position
OSDH. Position
▲
OSDV. Position
▲
▲
50
▲
50
/ Buttons.
S e l e c t : 2
Press the
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears
when the time set for the OSD Time Out has passed. Also, the
10 OPERATING THE MONITOR
return previous menu and turn off the On-Screen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears. Turning off the power should be avoided while using the Menu.
1 : E x i t
S e l e c t : 2
Button lastly, it ends, all changes are saved in the memory.
button can be used to
ADJUSTMENT MENU CONTENTS
Picture Adjust
Picture Adjust
Adjustment Item Problem / Option Button to Press
Contrast *
Brightness *
3
1,2,3
Adv. Contrast *
2,3,4
Too dull
Too intense
Too dark
Too bright
Off
Typical Contrast Ratio
Increased Contrast RatioOn
Off Normal
ECO Mode *
3
1
Brightness of back-light is reduced.
Brightness of back-light is reduced more than 1.2
Brightness of back-light is reduced more than 2.3
Off / -2 / -1 / 0 / +1 / +2
Overdrive *
5,6
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
1
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
*
bright. Can not select when Adv. Contrast is On.
2
Brightness and Adv. Contrast can not enable the same time when ECO Mode is on.
*
3
Contrast, Brightness, Adv. Contrast and ECO Mode adjustments are disabled when i-Style Color
*
is activated.
4
To activate the option, mark it in the setup menu. To deactivate it, remove the marking.
*
5
*
Overdrive can only be enabled when the input refresh rate is 60Hz.
6
*
Overdrive is disabled when Dot by Dot is activated.
ENGLISH
OPERATING THE MONITOR 11
Input Select
Direct
Direct
Direct
Direct
Direct
Input Select
Adjustment Item Problem / Option Button to Press
Select the DVI input. DVI
Select the HDMI input. HDMI
Input Select
Auto
Select the DisplayPort input. DisplayPort
Search for an available input source and select
automatically.
NOTE
Input source is fi xed, not selected automatically when DVI, HDMI and DisplayPort which
are selected.
ENGLISH
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
Input Select: Press the
Audio Adjust
Button when the Menu is not displayed.
Audio Adjust
Adjustment Item Problem / Option Button to Press
Volume
1
Mute *
Audio Input *
2
Too soft
Too loud
Off
On
Return the sound volume to the previous level.
Turn off the sound temporarily.
Select the HDMI input. HDMI
Select the DisplayPort input. DisplayPort
Select the Line-In input. Line-In
*1 To activate the option, mark it in the setup menu. To deactivate it, remove the marking.
2
*
Suitable for HDMI and DisplayPort input only.
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
Audio Adjust: Press the
Mute: Pressing and holding of the
Button when the Menu is not displayed.
Button for about 2 seconds when the Menu is not
displayed.
Mute and Unmute are switched as follows by pressing the
12 OPERATING THE MONITOR
Button successively.
Color Adjust *
Direct
Direct
Color Adjust
Adjustment Item Problem / Option Button to Press
Cool
Normal
Warm
User Color
i-Style Color
Bluish white
Greenish white
Reddish white
Red
Green
Blue
Off
Standard
Game
Cinema
Too weak
Too strong
Return to a state set by color adjustment except
i-Style Color.
For general windows environment and monitor
default setting.
For PC game environment.
For movie and video environment.
Scenery For displaying outdoor scenery images
Text
For text editing and viewing in a word processing
environment.
* Color Adjust is disabled when Blue Light Reducer is activated.
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
i-Style Color: Press the Button when the Menu is not displayed.
ENGLISH
Information
<Example>
Information
Resolution:
H.Frequency:
V.Frequency:
Pixel Clock:
Model Number:
1 : E x i t
1920x1080
67.56KHz
60.0Hz
148.5MHz
TF2738MSC
S e l e c t : 2
Information
Displays information regarding the current input signal coming
from the graphic card in your computer.
NOTE
See your graphic card user guide for more information
about changing the resolution and refresh.
OPERATING THE MONITOR 13
Manual Image Adjust
Direct
Direct
Manual Image Adjust
Adjustment Item Problem / Option Button to Press
1 / 2 / 3 / 4 / 5
You can change the picture quality from 1 to 5 (soft to sharp).
Sharpness
Press the Button to change the picture quality in numerical
order. Press the
Button to change the picture quality in
reverse numerical order.
Adjust the picture quality at resolutions of less 1920 x 1080.
You can change the picture quality (5 steps).
ENGLISH
Video Mode Adjust
Blue Light Reducer *
Full Screen
Aspect Ratio *
Off
2
1
2
3
Full screen display
1
Expansion display of Aspect
3
Display the picture dot by dot.Dot by Dot *
Typical
Blue light is reduced.
Blue light is reduced more than Mode1.
Blue light is reduced more than Mode2.
Off Normal
X-res Technology
Soft
Middle
Hard
Enhance the picture edge.
Enhance the picture edge more than the Soft option.
Enhance the picture edge more than the
Middle option.
*1 It can display in the center of the screen with a 4:3, 5:4 or 16:10 aspect ratio when input video
resolution is 4:3, 5:4 or 16:10.
2
*
Blue Light Reducer is disabled when Color Adjust is activated.
3
Dot by Dot is disabled when Overdrive is activated.
*
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
Blue Light Reducer: Pressing and holding of the
Button for about 2 seconds when the Menu is
not displayed.
14 OPERATING THE MONITOR
Setup Menu
Setup Menu
Adjustment Item
Language Select
OSD Position
OSD Time Out
OSD Background*
Opening Logo*
LED*
NOTE
Turn Off the Power Indicator when you are bothered by the light.
Problem / Option Button to Press
English
Français
Deutsch
Nederlands
Polski
OSD
H.Position
OSD
V.Position
You can set the OSD display duration time.
5 / 15 / 30 / 60 seconds
Off Retune the background of OSD.
On
Off
On
Off
On
English
French
German
Dutch
Polish
OSD is too left
OSD is too right
OSD is too low
OSD is too high
The background of OSD is made transparent.
iiyama Logo does not display when the monitor is
turned on.
iiyama Logo displayed when the monitor is turned on.
The Power Indicator is turned Off .
The Power Indicator is turned On.
Русский
Russian
Japanese
Simplifi ed Chinese
Traditional Chinese
ENGLISH
* To activate the option, mark it in the setup menu. To deactivate it, remove the marking.
Memory Recall
Memory Recall
Adjustment Item Problem / Option Button to Press
Memory Recall
Factory-preset data is restored.
OPERATING THE MONITOR 15
● Lock Mode
<OSD Menu>
1. The OSD lock will be activated by pressing the front buttons and for about 5 seconds. If you
try to access the OSD by pressing any of the buttons
will appear on the screen.
2. The OSD lock will be deactivated by pressing the front buttons
<Power Switch>
1. The power switch lock will be activated by pressing the front buttons and for 5 seconds.
Locking the power switch means that won't be able to turn off the Monitor while the power switch
is locked. If presses the power switch message "Power Button Locked" will appear on the screen.
2. The power switch lock will be deactivated by pressing the front buttons and again for about
5 seconds.
ENGLISH
, , and , message "OSD Locked"
and again for 5 seconds.
16 OPERATING THE MONITOR
POWER MANAGEMENT FEATURE
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
The power management feature of this product complies with power saving requirement of ENERGY
®
and VESA DPMS. When activated, it automatically reduces unnecessary power consumption
STAR
of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function, including any timer settings is confi gured by the operating system. Check your operating
system manual for information on how this can be confi gured.
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off , the
monitor enters into Power Management Mode which reduces the power consumption to less
than 0.5W*. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in several seconds when either the keyboard or the
mouse are touched again.
*
* USB is not connected.
NOTE
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
ENGLISH
OPERATING THE MONITOR 17
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem Check
The picture does
not appear.
The Power Cable is fi rmly seated in the socket.
(Power indicator
ENGLISH
does not light up.)
(Power indicator
is blue.)
(Power indicator
is orange.)
The screen is not
synchronized.
The screen
position is not in
the center.
The screen is too
bright or too dark.
The screen is
shaking.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
If the monitor is in power management mode, touch the keyboard or the mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the monitor.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
The power voltage is within the specifi cation of the monitor.
The signal timing of the computer is within the specifi cation of the monitor.
No sound.
The sound is too
loud or too quiet.
18 TROUBLE SHOOTING
The audio equipment (computer etc.) is ON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
Problem Check
A strange noise is
heard.
The touch
screen shows no
response.
The touch position
does not deviate.
The Audio Cable is properly connected.
The USB Cable is fi rmly seated in the socket.
Touch screen driver software is installed.
The calibration function set up correctly.
RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com for monitor recycling.
ENGLISH
TROUBLE SHOOTING / RECYCLING INFORMATION 19
APPENDIX
Design and specifi cations are subject to change without prior notice.
SPECIFICATIONS
Technology Projected capacitive 10pt touch
Touch
Screen
Hardness 6H
Total thickness 3.6mm
Communication system
Size Category 27"
Light transmission
ENGLISH
Panel technology
Size Diagonal: 27" (68.6cm)
Pixel pitch 0.31125mm H × 0.31125mm V
LCD
Panel
Brightness 300cd/m2 (Typical), 255cd/m2 (with Touch panel)
Contrast ratio 3000 : 1 (Typical: with Touch panel)
Viewable angle
Response time 12ms (Typical), 5ms (Gray to Gray)*
Display Colors Approx.16.7M
Sync Frequency Horizontal: 30-80kHz, Vertical: 55-75Hz
Maximum Resolution 1920 × 1080, 2.1 MegaPixels
Input Connector DVI-D, HDMI, DisplayPort
Plug & Play VESA DDC2B
Input Video Signal
Input Audio Connector ø 3.5mm mini jack (Stereo)
Input Audio Signal 1.0Vrms maximum
Speakers 3W × 2 (Stereo speakers)
Maximum Screen Size 597.6mm W × 336.2mm H / 23.5" W × 13.2" H
Power Source 100-240VAC, 50/60Hz 0.7A
Power Consumption*
1
Dimensions / Net Weight
Environmental Considerations
Approvals CE, TÜV-Bauart, cULus, EAC, CCC, IPX1*
85%
USB serial transfer
AMVA+
Right / Left : 89 degrees each, Up / Down: 89 degrees each (Typical)
TM
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Digital: HDMI, DisplayPort
30W typical, Power management mode: 0.5W maximum
Energy Effi ciency Class: A
648.5 × 386.5 × 50.0mm / 25.5 × 15.2 × 1.9" (W×H×D)
7.7kg / 17.0lbs
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
3
2
, ENERGY STAR
®
NOTE
*1 USB peripherals and audio-video equipment are not connected.
*
*
20 APPENDIX
2
IPX1 Standard Compliant : Only front face
3
When set to Overdrive +2.
DIMENSIONS
9.0mm/0.3”
318.0mm/12.5”
648.5mm/25.5”
599.5mm/23.6”
52.0mm/2.0”
18.0mm/0.7”
50.0mm/2.0”
10xM4 SCREW HOLE
(VESA MOUNT)
68.0mm/2.7”
193.0mm/7.6”
250.0mm/9.8”
68.5mm/2.7”
174.25mm/6.9”
9.0mm/0.3”
300.0mm/11.8”
174.25mm/6.9”
338.0mm/13.3”
386.5mm/15.2”
216.0mm/8.5”
8xM4 SCREW HOLE
(Outer)
COMPLIANT TIMING
Video Mode
Horizontal
Frequency
31.469kHz 59.940Hz 25.175MHz
640 × 480
37.500kHz 75.000Hz 31.500MHz
37.861kHz 72.809Hz 31.500MHz
35.156kHz 56.250Hz 36.000MHz
800 × 600
37.879kHz 60.317Hz 40.000MHz
46.875kHz 75.000Hz 49.500MHz
48.077kHz 72.188Hz 50.000MHz
48.363kHz 60.004Hz 65.000MHz
1024 × 768
56.476kHz 70.069Hz 75.000MHz
60.023kHz 75.029Hz 78.750MHz
1280 × 1024
63.981kHz 60.020Hz 108.000MHz
79.976kHz 75.025Hz 135.000MHz
1440 × 900 55.935kHz 59.887Hz 106.500MHz
1680 × 1050 65.290kHz 60.000Hz 146.250MHz
1920 × 1080 66.590kHz 59.930Hz 138.500MHz
Vertical
Frequency
Dot Clock
50.0mm/2.0”
50.0mm
48.5mm/1.9”
50.0mm/2.0”
50.0mm
100.0mm/3.9”
ENGLISH
APPENDIX 21
M171C21
Loading...