Ihome IZABT50 User Manual
AROMA
Model iZABT50
Aromatherapy Speaker with Lighting
QUESTIONS? visit www.ihome.com
sential Oil
Ingredients:
Lavendula Hybrida Oil
Best Before:
EXP202000628
D062801001
WELCOME
Thank you for choosing the iZABT50 Zenergy Aroma from iHome. This
user guide will get you up and running quickly. For more information
about this and other iHome products, please visit www.ihome.com. Please
read this guide and all safety information prior to use.
GETTING STARTED
This unit ships with the following items. Please check to see that all
items are present.
1. iZABT50 aromatherapy speaker
2. Remote control with battery
3. 100-240V Universal AC power adapter
4. 3 replaceable aroma pads
5. 1 5ml bottle of 100% pure lavender essential oil
AC adapter
2. remote control
3.
1. iZABT50 speaker
100% Pure Es
LAVENDER
5ml
4. 3 aroma pads 5. 5mL essential oil bottle
1
FEATURES & FUNCTIONS
FRONT PANEL
Light Therapy
Mode Button
Power Button
BACK PANEL
Bluetooth/Call/
Play/Pause Button
Timer Duration
indicators
Timer Button
3 x replaceable aroma pads
sleep duration volume
aromatherapy
DC Jack
Sound Therapy
Mode Button
Aromatherapy
Mode Button
Aroma Fan
Indicator
Bluetooth status indicator
(brightness)6090 30
Volume/Brightness
Buttons
Aromatherapy tray
2
REMOTE CONTROL
Power Button
• Press to turn unit ON or OFF
Aromatherapy Fan Button
• Press to turn fan on high, low or OFF
Timer Button
• Press to sleep to current mode(s) for
30, 60 or 90 minutes (or turn timer OFF)
Light Therapy Mode Button
• Press to cycle through light therapy modes
Light Therapy Brightness Buttons
• Press to adjust brightness up or down
Sound Therapy Mode Button
• Press to cycle through sound therapy modes
Volume Adjust Buttons
• Press to raise or lower sound therapy or
Bluetooth audio volume
Play/Pause Button
• Press to play or pause Bluetooth audio
Track Buttons
• Press to skip to previous or next track
Some features and functions work dierently when accessed directly
on the unit from when accessed from the remote control.
REPLACING THE REMOTE CONTROL BATTERY
Your Remote comes with one CR2032 battery which
is installed.
REMOVE THE BATTERY PULL TAB BEFORE USE.
When the range of the remote seems reduced or
if it ceases to work properly, it’s time to replace
the battery.
1. Press point of a pin or paperclip firmly into the hole
by the battery compartment cover on the rear of the
remote control to release the cover.
2. Slide battery compartment cover o. Remove old
battery.
3. Place new CR2032 in battery well as shown
(make sure + side is facing upwards).
4. Replace battery cover.
3
CONNECTING THE IZABT50
Plug the include AC adapter into
the DC jack on the back of the unit
and connect the plug to a working
outlet not controlled by a light
switch.
sleep duration volume
DC 5V 2A
aromatherapy
(brightness)6090 30
4
Loading...