iHome IPL10 User Manual

Model iPL10

stereo alarm clock to charge

your iPod or iPhone

QUESTIONS? Visit www.ihomeaudio.com

WELCOME

Thank you for choosing the iPL10 from iHome. This user guide will

get you up and running quickly and provide helpful hints to

maximize enjoyment. For more information about this and other

iHome products, please visit www.ihomeaudio.com Note that details

on using iHome apps with this unit are not covered in this booklet.

For information on using iHome apps, please visit

www.ihomeaudio.com/apps

GETTING STARTED

This unit ships with the following items. Please check to see that all

items are present.

1 iPL10 speaker system

2 100-240V Universal AC power adaptor

FEATURES & FUNCTIONS

Top panel

Play/Pause/

Presets Button

Volume Control

Buttons

Power On/Off

Mode Button

Snooze/Dimmer Button

Back panel

Display

PM Indicator

Button

Volume Indicator

Backrest

DC Jack USB dock

Time Display

Lightning DockLightning Dock

–/+ Settings Buttons

Time Set/Sleep button Alarm button

USB Play/Pause Button

Alarm Indicator

iPod Indicator

WAKE-TO Indicator (iPod/Buzzer)

Sleep Indicator

Low Backup Battery Indicator

CONNECTING TO AC POWER

This unit operates on AC power

using the included 100V-240V

universal AC adaptor for charging

and playing your iPhone or iPod.

RESET

Place unit on a stable surface. Plug

RESET

TEST

the power adaptor into the DC jack

on back of the unit and the other

end into a working wall socket. You

can now charge your iPhone or

iPod.

BACKUP BATTERY

The iPL10 ships with a CR2450 battery installed for backup to provide

continuous alarm operation and clock settings in the event of a power failure.

Remove the pull tab from the battery compartment on the bottom of the unit

before use. If a power failure occurs or the AC cord is accidentally

disconnected, the display backlight will not remain lit, but current time and

alarm time settings will be temporarily maintained. Otherwise, you must reset

the time and alarm settings.

Note: The Battery Low icon is located at the right side of clock display.

When the backup battery is low and needs to be replaced, the Battery

Low icon will flash. To replace, follow steps below:

BACKUP BATTERY (CONTINUED)

1. Please make sure the AC adaptor is connected. Otherwise all settings

may be lost during battery replacement.

2. Use a Phillips screwdriver to open the backup battery compartment

door located on the bottom of the unit.

3. Remove the exhausted battery. Insert a

new CR2450 battery by easing it under the

tabs in the battery well and pressing down.

Make sure the side marked + is facing up.

4. Close the battery compartment door and

tighten the battery door screw.

Note: Make sure you dispose of battery

properly (see your local regulations).

WARNING: Lithium batteries can explode or cause burns if disassembled,

shorted, recharged, exposed to water, fire, or high temperatures. Do not

place loose batteries in a pocket, purse, or other container containing metal

objects, mix with used or other battery types, or store with hazardous or

combustible materials. Store in cool, dry, ventilated area. Follow applicable

laws and regulations for transport and disposal.

+ 10 hidden pages