iHome iBTW281 Quick Start Guide
Model: iBTW281
Wireless Charging Dual Alarm
Clock Speaker System
Quick Start Guide
Questions? Contact Customer Service at 1-800-288-2792
For warranty visit:
www.ihome.com/support
What’s
Included:
Meet Your iBTW281
Top
Power/
Alarm
Reset
Color Mode/
Sleep
Back
Alarm 1
Button
Alarm 2
Button
Play/Pause/
Speakerphone
5V/1A USB Port
(for charging devices)
iBTW281 unit
Snooze/
Dimmer
Volume
Down
AC adapter
Wireless
Charging
Area
Bluetooth
Pairing
Volume Up
12V/2.5A
DC Jack
Time Set
Quick Set-Up:
Step One
Connecting the Unit
Connect the included AC adapter to the DC
jack located on the back of the unit and
connect the other end to a working wall outlet.
Step Two
Bluetooth Pairing
• Turn on your Bluetooth device and make it
‘discoverable’ by turning on Bluetooth mode.
• Press the Power Button on the iBTW281. The first
time the unit is powered on, it will automatically
enter pairing mode.
• Select ‘iHome iBTW281’ on your device’s
Bluetooth menu to connect!
Step Three
Setting Your Clock
• Press and hold the Time Set Button until the
display flashes.
• Press the – or + Buttons to adjust selections and
tap Time Set to confirm (make sure you set the
correct AM/PM time).
• Do this for time, year, month and date.
• All done!
Daylight Savings Time:
By default, the DST Switch in the battery
compartment is set to Auto and will automatically
adjust the time in March and November.
+
iHome
iBTW281
DC 12V 2.5A
The Display
PM Indicator
Voice Icon
Dimmer Icon
Bluetooth
Pairing Icon
Alarm 1
Wake To
Alarm 2
Using Qi Wireless Charging
This unit will wirelessly charge Qi compatible wireless
charging phones. Place Qi compatible device face up on
charging rest.
Check the lightning icon on the iBTW281 display for
charging status:
Slow blinking icon: Device is charging properly.
Solid icon: Device is charged.
Rapid blinking icon: Device is not charging
properly. Reposition device.
Note: The lightning icon may continue to blink slowly
when iOS devices are fully charged.
CAUTION: Remove metal protective or magnetic case
from phone before charging. When charging phone, do
not place magnetic-striped or other metal objects on
the charger. Doing so could damage the object or this
unit. Qi compatible phones with metallic looking
finishes will charge normally.
Low Battery
Hands Free Icon
Sleep Icon
Wireless Charging
Charge Your Phone Here
Setting and Using the Alarms
This unit features dual alarms which can be set to dierent times and alarm sources. Each is set
in the same way. Instructions are given as “Alarm Button”; use Alarm 1 Button or Alarm 2
Button to set respective alarms. Note: Each step must be completed while display is flashing or
setting will time-out with any changes saved.
1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash.
A beep sounds.
2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time. The PM indicator appears to the left of the display.
3. Press the Alarm Button to confirm the alarm time setting. The alarm schedule will flash:
7 (every day), 5 (weekdays) or 2 (weekend only). Press the – or + Buttons to select the desired
alarm schedule.
4. Press the Alarm Button to confirm the alarm schedule. The wake-to source will flash.
5. Press the – or + Buttons to select the desired wake-to alarm source: Bluetooth, Tone or Light
Only (no alarm sound).
Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is
detected, the alarm will default to the last tone selected.
Wake to Tone: Press the Alarm Button to confirm. Press the – or + Buttons to select the desired
tone to wake to (Tone 1 -Tone 4).
Wake to Light Only: Press the Alarm Button to confirm. Select this mode to wake to silent light
only alarm. (You will then skip volume setting and advance to step 9 Wake to Light setting.)
6. Press the Alarm Button to confirm wake-to source. The alarm volume will flash (unless Wake to
Light is set wake to choice, then volume setting is skipped and you are done).
7. Press the – or + Buttons to adjust the alarm volume.
8. Press the Alarm Button to confirm alarm volume. The current Wake to Light mode will flash.
9. Press the – or + Buttons to select the desired light mode to wake to (Slow Fade, Fast, One Color,
Twinkle, Pulse, Sky Gradient, Nightlight, O ).
10. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will
confirm alarm setting is complete. The alarm icon will remain on the display, to show the alarm is armed.
Previewing the Alarm and Turning the Alarm On/O
1. Press and release the Alarm Button to view the current alarm time.
2. Press the Alarm Button to toggle the alarm ON and OFF, indicated by the related white
alarm indicator.
3. When the alarm sounds, press the corresponding Alarm Button (1 or 2) to disable the alarm
and reset it to come on at the same time the next day.
Snooze/Display Dimmer
Snooze: When the alarm is sounding, press the Dimmer/ZZZ Button to snooze for 9
minutes.
Dimmer: Press the Dimmer/ZZZ Button (when alarm is NOT sounding) to adjust display
brightness.
Programmable Snooze and Dimmer
Adjust the snooze duration and set a schedule for your clock backlight to automatically dim
and brighten at certain times of the day.
1. Press and hold the Dimmer/ZZZ Button.
2. Use the + or - Buttons to adjust the snooze duration from 1-29 minutes. Press the
Dimmer/ZZZ Button again to confirm.
Now it’s time to set the display dimmer schedule:
3. Default is set to OFF. Toggle to ON by pressing the + Button and then the ZZZ Button to
confirm. (Note: Choosing OFF will simply exit the setting.)
4. Now choose the brightness level for daytime hours using the +/- Buttons. Press ZZZ again
to confirm.
5. Now set the time you want the daytime dimmer to take eect. Use the +/- Buttons and
press ZZZ again to confirm.
6. Now choose the brightness level for nighttime hours. Use the +/- Buttons and press ZZZ
again to confirm.
7. Finally, set the time you want the nighttime dimmer to take eect. Use the +/- Buttons
and press ZZZ again to confirm.
8. Done! The icon will appear on the display when Dimmer Schedule is active.
Manual Bluetooth Pairing
1. Press and hold the Bluetooth Button on the top of the iBTW281 for 2 seconds.
2. Select ‘iHome iBTW281’ on your device’s Bluetooth menu to connect.
3. If pairing is successful, a voice prompt will announce “CONNECTED”, then Bluetooth indicator
appears solid blue, indicating the iBTW281 is ready to play music.
4. To reset Bluetooth settings, press and hold the Bluetooth Button for 10 seconds.
Playing Audio Via Bluetooth
1. Press the Play/Pause/Speakerphone Button on the unit to play or pause audio from
your linked Bluetooth device.
2. Press the – or + Buttons to adjust the volume on the unit.
Using the Speakerphone feature
The iBTW281 must be ON and connected to a Bluetooth device in order to receive calls.
• Press the Play/Pause/Speakerphone Button to accept an incoming call.
• Press and hold to end or ignore a call.
Color Modes
Press the Color Button repeatedly to cycle through 8 dierent modes:
• Slow Fade • Pulse to Music
• Fast Change • Sky Gradient
• Favorite Color • Nightlight
• Twinkle • OFF
Favorite Color Mode: When the unit is in stand-by,
press +/- to cycle through the color spectrum.
Charging Devices Via USB Port
1. Connect the standard size end of a USB cable
(not included) to the USB port on the back of
the unit and connect the other end to the
charging port on your device.
2. Monitor the charging on your device. Some
devices use a proprietary charging method and
will not charge using the USB port. If this
happens, you must charge your device using
the charger that came with it.
NOTE: Unit must be plugged into working
outlet to charge devices.
Battery Back-Up
The unit comes with a CR-2450 back-up battery installed to provide continuous alarm
operation and clock settings in the event of a temporary power failure. Remove the battery
pull tab before use. When the battery icon on the clock display is flashing, it is time to
replace the back-up battery. The battery compartment is located on the bottom of the unit.
1. Make sure the AC adapter is connected, or you will lose
your time and alarm settings during battery replacement.
2. Use a Phillips screwdriver to open the battery compartment
door.
3. Remove the exhausted battery from the compartment and
insert 1 CR-2450 battery, checking that the + side is facing
you. Replace the compartment door. Do not overtighten.
WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged,
exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse,
or other container containing metal objects, mix with used or other battery types, or store
with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable
laws and regulations for transport and disposal.
WARNING
• Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell
battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in
just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not
close securely, stop using the product and keep it away from children. If you think
batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.”
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A
cloth or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning
agents such as thinner or similar materials can damage the surface of the unit.
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.
However, improper use can result in potential electrical shock or fire hazards. Please read and follow all safety and
operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take
special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,
laundry tub, swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation.
For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.
Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of
air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating
instructions or as marked on the appliance. Only use the AC adapter that came with the unit.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the
unit to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section for cleaning instructions.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any
openings or vents located on the product.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable
system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent
damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, remove
batteries before storage
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user manual.
Service methods not covered in the operating instructions should be referred to qualified service personnel.
14. Magnetic Interference: This product’s speakers contain powerful magnets which could cause interference or
damage to sensitive equipment such as hard drives, CRT televisions and monitors, as well as medical, scientific, and
navigational devices. Keep this unit away from these products at all times.
15. Only use attachments/accessories specified by the manufacturer. This product is suitable for use in tropical and/or
moderate climates.
16. The unit should be serviced by qualified service personnel when the enclosure damaged or does not operate
normally.
17. No naked flame sources, such as lighted candles, should be placed on the apparatus.
18. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture”
19. CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
20. Do not dispose of batteries in the household trash or fire
21. The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.
FCC INFORMATION
Model: iBTW281
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES 3(B) / NMB-3(B), CAN RSS-216/CNR-216
Canada Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences
et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.”
Ce matériel est conforme aux limites d'exposition aux rayonnements rf de ic énoncés dans un autre environnement.
CCe matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et votre corps. "
CAN ICES-3(B) / NMB-3(B)
CAN RSS-216/CNR-216
1 Year Limited Warranty
For warranty and full instructions, visit ihome.com/support
© 2019 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
iBTW281-061419-A
Printed in China
FCC ID: EMOIBTW281
IC: 986B-IBTW281
Loading...