Igloohome Smart Deadbolt 02 Installer/user Manual
Installers &
User guide
Deadbolt 02.
Version 0.2
As our igloohome app is frequently updated, there may be changes to this manual.
Please refer to our website igloohome.co/support for the latest version of the manual.
Table of Contents
04
What’s Included
05
Specications
06
Requirements
07
Lock Anatomy
08
Preparing Door for Installation
10
Prepare Lock for Installation
11
Installation Instructions
16
Test Lock
17
Preparing the Door Frame
19
Features
20
Unlocking
21
Locking
18
Pairing
22
Lock Tutorial
25
Lock Behaviour
26
Troubleshoot
What’s Included
LR
Front Assembly
Rubber Gasket Back Assembly
Battery Case Lid
Batteries x4
Bolt Assembly
Keys x2
Screw Holder
Back Plate
Strike Plate Housing &
Strike Plate
Drill Sheet
80mm
Tailpiece
40mm
Bolt Screw x3
5mm
Bolt Screw x2
25mm
Wood Screw x4
22mm
Bolt Screw
04
Specications
Model igloohome Smart Deadbolt 02
Material Zinc Alloy
Current Rating (Standby) ~30uA
Current Rating (Active) ~200mA
Batteries 4 x AA Alkaline (Non - Rechargeable)
Unlock Mechanism Bluetooth, PIN code, Keys
Front BackSide
142mm
60mm 30mm 45mm 60mm
155mm
05
Requirements
Height & WidthDoor Thickness & Gate Clearance
35mm
38mm - 50mm
10 mm
10 mm
133 mm
>110mm (60mm bolt tongue)
or
>120mm (70mm bolt tongue)
06
Lock Anatomy
Outer Body
Touch Screen
Keypad
Key hole
Cover
(Release PINs
to access
physical key
unlock)
9V Jumpstart
Battery Cover
Release
Battery Cover
Thumbturn
Privacy
Lockout Button
07
* Please ensure that there is an existing handle on your door for push - pull access.
* Not for: metal gates, glass doors or sliding doors.
If you are unsure if your door is suitable, send us web links to your door pictures to
Preparing Door for Installation
Items needed:
Recommended
Door and door frame material : Wood
Recommended
Gap between door and door frame: <3mm
DrillDrill Sheet 10mm Drill Bit 54mm Hole Saw
20mm Spade Bit#2 Phillips Screw Driver 20mm Chisel Hammer
support@igloohome.co
08
How to use the Drill Sheet
* Mark the center of the holes and then drill for accuracy.
Drilling (Door)
Make sure this
is aligned to the
centre of door edge
Door edge
Fold here
before drilling
holes for side
Chiselling
Depth Width:
2 - 3mm or
until bolt
assembly
plate is ush
against door
Put the bolt tongue in &
chisel around the edge
09
Loading...