Manual
summit wireless instructions
Introduction
The Summit Wireless Earbuds deliver premium sound to help you power through any
workout. Here’s how to get the most out of them. To download this manual, visit www.
1
zagg.to/manuals.
Wireless Hub
Your Summits feature a convenient wireless hub that houses all the music and call
2
controls for easy access when you’re on the go. When you’re not using your earbuds, the
magnetic Storage Clip™ makes cable management easy; simply wrap the earbud cables
around the wireless hub and secure in place with the Storage Clip. Whether they’re in
your ears or in your pocket, the Summit Wireless Earbuds were made to move. Below is
a quick reference for how to use the wireless hub:
Button Functions:
Raised bump button (Up button)
- Quick press – Volume up
- Long press – Track next song
Middle button (Center button)
- Quick press – Play/Pause/Answer call/End call
- Medium press – Voice control (Siri® and Android®)
- Long press – Power on/Power off/Deny call
Recessed groove button (Down button)
- Quick press – Volume down
- Long press – Track previous song
Securing Wings
The Summit Wireless Earbuds come with
ergonomically designed securing wings, made
3
to sit within the curve of your ears to hold the
earbuds in place through any activity. Three
dierent sizes help you find the perfect fit.
Recessed
groove button
Middle
button
Raised
bump button
summit wireless instructions
Power and Pair
1. Press and hold the Power button until the LED flashes red and blue.
4
2. Turn on your device’s Bluetooth® connection and select “IFROGZ Summit”. Complete
any additional pairing steps based on your device. The LED will flash blue every five
seconds while your earbuds are on and paired.
3. To turn your earbuds o, press and hold the Power button for six seconds. The LED
will flash red until they are powered o.
4. The next time you turn on the earbuds they will automatically connect to your device.
NOTE: If you are pairing with a new device, with your earbuds o, press and hold
the Power button for five seconds until the light flashes red and blue, indicating
pairing mode.
Play Music
1. Press the Play button to begin playing your music.
5
2. While music is playing, press Play quickly to pause it. Press Play quickly again
to resume.
3. Quick-press the Volume Up or Volume Down buttons to control your audio
volume.
4. Press and hold the Volume Up or Volume Down buttons to track forward and
back through your playlist.
Take Calls
1. Press the Play button to answer an incoming call.
6
2. Press and hold the Play button for three seconds to send an incoming call
to your voicemail.
3. Press the Play button during a call to disconnect.
Charge
To charge your Summit Wireless Earbuds, connect the micro USB end of the included
charging cable to the port at the end of the wireless hub and the USB end to your
8
preferred USB outlet. The LED will light red while your earbuds are charging and will turn
o once they are fully charged.
summit wireless instructions
FCC STATEMENT
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
©2016 ZAGG Inc All Rights Reserved | NASDAQ: ZAGG | MADE IN CHINA
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by ZAGG Inc is under license. Other trademarks and trade names are those of their respective owners.
ZAGG, Summit, and Storage Clip are trademarks of ZAGG Inc.
Siri is a trademark of Apple Inc.
Android is a trademark of Google Inc.
Loading...