Impulse Duo Wireless Instructions
Introduction
Connect to the Impulse Duo Wireless Earbuds and get in tune with crisp, clear sound.
Here’s how to get the most out of them.
1
Wireless Control
Your Impulse Duo Wireless Earbuds feature a wireless control that houses all the music
2
and call controls for easy access. When you’re not using your earbuds, the magnetic
storage clip makes cable management easy; simply wrap the earbud cables around the
wireless control and secure in place with the storage clip. Whether they’re in your ears or
in your pocket, the Impulse Duo Wireless Earbuds are made to move. Below is a quick
reference for how to use the wireless control.
Button Functions:
Raised bump button (Up button)
- Quick press – Volume up
- Long press – Track next song
Middle button (Center button)
- Quick press – Play/Pause/Answer call/End call
- Medium press – Voice control (Siri and Android)
- Long press – Power on/Power off/Deny call
Recessed groove button (Down button)
- Quick press – Volume down
- Long press – Track previous song
Recessed
Power and Pair
1. Press and hold the Power button for five seconds until the light flashes red and blue,
3
indicating pairing mode. The next time you turn the earbuds on, you only need to
press and hold the Power button for three seconds.
2. Ensure your device’s Bluetooth® connection is on and select “IFROGZ Impulse Duo
Wireless.” Complete any additional pairing steps based on your device. The LED will
flash blue every five seconds while your earbuds are on and paired.
3. To turn your earbuds o, press and hold the Power button for three seconds.
The LED will flash red until they are powered o.
Charge
To charge your earbuds, connect the micro USB end of the included charging cable to the
port at the end of the wireless control and the USB end to your preferred USB outlet. The
4
LED will light red while they are charging and will turn o when they are fully charged.
groove button
Middle
button
Raised
bump button