IDEC FL1E-H12RCA, FL1E-H12SND, FL1E-H12RCC, FL1E-H12RCE, FL1E-B12RCA User Manual

B-1090(6)

DEC

FL 1 E

series

DEC

5mar'tRelay

User's

Manual

••••••••••

•

IDEC CORPORATION

Revision History

Date Manual No. Description

November, 2008 B-1090(0)

First print

December, 2008 B-1090(1)

Sensor connections for IDEC SmartRelay:
FL1E-H12RCA / FL1E-B12RCA /
FL1E-H12RCE / FL1E-B12RCE / FL1E-H12SND

February, 2009 B-1090(2)

• Compatibility (FL1C-PM3 memory cartridge in FL1E)

• Compatibility (FL1E-PM4 memory cartri dg e in ol d er
IDEC SmartRelay modules)

July, 2009 B-1090(3) Deleting the circuit program and passwor d “Note”

September, 2009 B-1090(4)

• 1. The analog output module (FL 1D-K 2B M 2) stru c ture

• 1. How to identify the IDEC SmartRelay
(Analog output module )

• 2.1.2 Setup with different voltage classes

• 2.1.3 Compatibility (F L1D-K2BM2)

• 2.2.3 Mounting the Text Display

• 2.3.4 Connecting outputs, Output Internal Circuit

(FL1D-K2BM2)

• 3.6.5 Password

• 3.6.5 Changing IDEC SmartRelay fr om RUN to STOP

mode from the Text Display

• 4.4.20 Analog amplifier (Analog output )

• 6. Compatibility (FL1C-PM3 memory cartrid ge i n FL1E)

• 6. Compatibility (FL1E-PM4 memory cartrid ge in older

IDEC SmartRelay modules)

• A.1 General technical data (Degree of protection)

• A.11 T echnical data: FL1D-K2BM2

• E: Type Number (FL1D-K2BM 2)

July, 2010 B-1090(5)

• 1. How to identify the IDEC SmartRelay
(Base module)

• 4.4.11 Seven-day time switch

• 4.4.12 Twelve-month time switch

• A.4 Technical data: FL1E-H12SND

(Backup of the real-time clock at 25°C,
Accuracy of the real-time clock)

• E: Type Number (FL1E-H12SND)

December, 2011 B-1090(6)

• 7. IDEC SmartRelay software

Adding Windows 7 to the supporting OS.

• Deleting the description for LONWORKS.

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

IDEC SmartRelay Manual i

Safety guidelines

This manual contains notices you have to observe in order
to ensure

your personal safety, as well as to prevent damage
to property. The notices referring to your personal safety are
highlighted in the manual by a safety alert symbol, notices
referring to property damage only have no safety alert
symbol. The notices shown below are graded according to
the degree of danger.

If more than one degree of danger is present, the warning
notice representing

the highest degree of danger will be used.

A no

tice warning of injury to persons with a safety alert symbol

may also include a warning relating to property damage.

!

Danger

indicates that death or severe personal injury will result if proper
precautions are not taken.

!

Warning

indicates that death or severe personal injury may result if proper
precautions are not taken.

!

Caution

with a safety alert symbol indicates that minor personal injury can
result if proper precautions are not taken.

Caution

without a safety alert symbol indicates that property damage can
result if proper precautions are not taken.

Note

indicates that an unintended result or situation can occur if the cor­responding notice is not taken into account.

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

ii IDEC SmartRelay Manual

Qualified Personnel

The device/system may only be set up and used in
conjunction with this documentation. Commissioning and
operation of a device/system may only be performed by
qualified personnel. Within the context of the safety notices
in this documentation qualified persons are defined as
persons who are authorized to commission, ground and
label devices, systems and circuits in accordance with
established safety practices and standards.

Prescribed Usage

Note the following:

Copyright  IDEC

CORPORATION

All rights reserved

The reproduction, distribution or use of this document or its
contents

is not permitted without express written authority.
Offenders will be liable for damages. All rights reserved, in
particular in the event of patents being granted or the 
registration of a utility model or design.

Disclaim of Liability

We have reviewed the contents of this publication to ensure
co

nsiste

ncy with the hardware and software described.
Since variance cannot be precluded entirely, we cannot
guarantee full consistency. However, the information in this
publication is reviewed regularly an d an y ne cessa ry 
corrections are included in subsequent editions.

!

Warning

This device and its components may only be used for the
applications described in the catalog or the technical description,
and only in connection with devices or components from other
manufacturers which have been approved or recommended by
IDEC.
Correct, reliable operation of the product requires proper transport,
storage, positioning and assembly as well as careful operation and
maintenance.

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Preface

IDEC SmartRelay Manual iii

Preface

Dear customer
We thank you for purchasing IDEC SmartRelay and

congratulate you on y

our decision. With IDEC SmartRelay
you have acquired a logic module that meets the stringent
quality requirements of ISO 9001.
IDEC SmartRelay can be used in ma

ny fiel

ds of applications.
Due to its high functionality and easy operation, IDEC
SmartRelay offers you the utmost efficiency for almost any
application.

Purpose of this manual

This IDEC SmartRelay manual provides you with information
ab

out the cre

ation of circuit programs, about the installation
and use of FL1E IDEC SmartRelay base m odules, th e Te xt
Display and the IDEC SmartRelay exp ansion mo dules , and
about their compatibility with the previous FL1A–FL1D
versions (FL1x are the last four characters of the order
number of the base modules and differentiate the device
series).

IDEC SmartRelay’s place in information technology

The wiring information in your IDEC SmartRelay manual is
also found in the

IDEC SmartRe

lay Product Info included
with all devices. For further information on programming the
IDEC SmartRelay on your PC, refer to the Online Help for
WindLGC.
WindLGC is the programming software for PCs. It runs

un

der Win

dows



. It helps you to get started with IDEC
SmartRelay and to write, test, print out and archive your
programs, independent of the IDEC SmartRelay.

Guide

The manual is divided into 8 chapters:

• Getting started with IDEC SmartRelay

• IDEC SmartRelay installation and wiring

• Programming IDEC SmartRelay

• IDEC SmartRelay functions

• Configuring IDEC SmartRelay

• IDEC SmartRelay memory and battery cartridges

• IDEC SmartRelay software

• Applications

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Preface

iv IDEC SmartRelay Manual

Valid range of this manual

The manual applies to devices of series FL1E.

New features of the FL1E IDEC SmartRelay device series

• The Text Display provides an additional display device for
me

ssages, a

nd contains four cursor keys and four functions

keys that can be used in the circuit program.

• An additional password protection function is available in
the

Te

xt Display (version 4 or later) and can only be enabled
when the Text Display is used together with IDEC
SmartRelay Base modules (version 4 or later).

• The new IDEC SmartRelay Battery cartridge and the
IDEC Smar

tRel

ay Combined Memory/Battery cartridge
provide up to two years of backup time for the real-time
clock. The new IDEC SmartRelay Memory cartridge and
the Combined Memory/Battery cartridge provide 32
Kbytes memory space.

• Additional optional analog inputs and fast digital inputs are
available on

some of the F

L1E IDEC SmartRelay base

modules.

• FL1E IDEC SmartRelay configuration menus can be
d

isp

layed in ten supported languages. You have a
configuration choice to specify the language for IDEC
SmartRelay menus.

• New instruction blocks are available: Pulse Width Modulator
(PWM), Ana

lo

g Math, and Analog Math Error Detection.

• Message texts can tick on and off the display; can include
bar

graphs, can switch between two character sets, and
can be displayed on either the IDEC SmartRelay Display,
the Text Display, or both. Full editing capabilities are
available from WindLGC; editing from the IDEC
SmartRelay base module is limited to simple text. See
section 2.1.3 for further details.

• USB PC cable between a PC and IDEC SmartRelay base
mo

dule is ava

ilable as an option.

• You can now have up to 200 program blocks in your
circuit prog

ram.

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Preface

IDEC SmartRelay Manual v

Additional differences compared to previous devices 
(FL1A to FL1D)

• Extended set of reference parameters for function blocks.

• Enhancements to up/down counter, Operating hours
counter,

Twelve-month time switch and analog watchdog

instruction blocks.

• You can find information on compatibility

of IDEC Smart-

Relay FL1

E to previous devices at section 2.1.3.

Additional support

At our Internet address
you can quickly and easily find answers to your
queries about IDEC SmartRelay.

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Preface

vi IDEC SmartRelay Manual

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

IDEC SmartRelay Manual vii

Contents

Preface.....................................................................iii

Contents.................................................................vii

1 Getting started with IDEC SmartRelay...................1

2 IDEC SmartRelay installation and wiring ............17

2.1 Modular IDEC SmartRelay setup...................................................20

2.1.1 Maximum setup................ ............................................... ..............20

2.1.2 Setup with different voltage classes ..............................................22

2.1.3 Compatibility..................................................................................24

2.2 Installing/removing IDEC SmartRelay...........................................25

2.2.1 DIN rail mounting.......................................... ......................... ........26

2.2.2 Wall-mounting................................................................................29

2.2.3 Mounting the Text Display .............................................................30

2.3 Wiring IDEC SmartRelay ................................................................32

2.3.1 Connecting the power supply........................................................33

2.3.2 Connecting the Text Display power supply....................................34

2.3.3 Connecting IDEC SmartRelay inputs.............................................35

2.3.4 Connecting outputs........................................................................44

2.3.5 Connecting the AS interface bus...................................................49

2.4 Putting into operation............................................ ... ......................51

2.4.1 Switching on the IDEC SmartRelay/Power On..............................51

2.4.2 Operating states............................................................................54

3 Programming IDEC SmartRelay ..........................57

3.1 Connectors......................................................................................58

3.2 Blocks and block numbers............................................................60

3.3 From circuit diagram to IDEC SmartRelay program....................63

3.4 The four golden rules for operating IDEC SmartRelay................66

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

viii IDEC SmartRelay Manual

3.5 Overview of IDEC SmartRel ay me nu s .............................. .. ... ... ... .68

3.6 Writing and starting the circuit program......................................69

3.6.1 Selecting programming mode ....................................................... 69

3.6.2 The first circuit program .................................................................70

3.6.3 Circuit program input........................................................... .......... 72

3.6.4 Assigning a circuit program name.................................................77

3.6.5 Password.......................................................................................78

3.6.6 Switching IDEC SmartRelay to RUN mode...................................84

3.6.7 Second circuit program .................................................................86

3.6.8 Deleting a block................................................................... ... ....... 92

3.6.9 Deleting block groups................ ....................................................93

3.6.10 Correcting programming errors.....................................................94

3.6.11 Selecting analog output values for RUN/STOP transition............. 94

3.6.12 Defining the type of analog outputs............................................... 95

3.6.13 Deleting the circuit program and password...................................96

3.6.14 Summertime/wintertime conversion..............................................97

3.6.15 Synchronization...........................................................................101

3.7 Memory space and circuit program size....................................103

4 IDEC SmartRelay functions ................................109

4.1 Constants and conn ec tors - Co..................... ... ... .. ......................110

4.2 Basic functions list - GF............................................................... 114

4.2.1 AND..............................................................................................115

4.2.2 AND with Edge Detection.............................................................116

4.2.3 NAND (not AND).........................................................................116

4.2.4 NAND with Edge Detection..........................................................117

4.2.5 OR................................................................................................118

4.2.6 NOR (not OR)..............................................................................119

4.2.7 XOR (exclusive OR).................................................................... 120

4.2.8 NOT (Negation, Inverter).............................................................120

4.3 Special functions.......................................................................... 121

4.3.1 Designation of the inputs.............................................................121

4.3.2 Time response ............................................................................. 122

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

IDEC SmartRelay Manual ix

4.3.3 Backup of the real-time clock .......................................... ... .........123

4.3.4 Retentivity....................................................................................123

4.3.5 Parameter protection.......................................................... .........124

4.3.6 Calculating the gain and offset of analog values............. ... .........125

4.4 Special functions list - SF ............................................................128

4.4.1 On-delay......................................................................................131

4.4.2 Off-delay......................................................................................135

4.4.3 On-/Off-delay...............................................................................136

4.4.4 Retentive on-delay.......................................................................138

4.4.5 Interval time-delay relay/Pulse output .........................................139

4.4.6 Edge-triggered interval time-delay rela y......................................140

4.4.7 Asynchronous pulse generator........................................ ............142

4.4.8 Random generator.......................................................................144

4.4.9 Stairwell Light Switch...................................................................146

4.4.10 Dual-function switch ....................................................................148

4.4.11 Seven-day time switch....................................... ... .......................150

4.4.12 Twelve-month time switch ...........................................................155

4.4.13 Up/down counter ................................. ......................... ...............161

4.4.14 Operating hours counter..............................................................164

4.4.15 Frequency trigger ........................................................................168

4.4.16 Analog trigger ..............................................................................171

4.4.17 Analog differential trigger.............................................................174

4.4.18 Analog comparator ......................................................................177

4.4.19 Analog watchdog.........................................................................182

4.4.20 Analog amplifier...........................................................................185

4.4.21 Latching relay ...................................... ... ......................... ............190

4.4.22 Current impulse relay .................................................................191

4.4.23 Message texts..............................................................................193

4.4.24 Softkey.........................................................................................205

4.4.25 Shift register.................................................................................208

4.4.26 Analog Multiplexer.......................................................................210

4.4.27 Analog Ramp Control..................................................................212

4.4.28 PI controller .................................................................................216

4.4.29 Pulse Width Modulator (PWM)....................................................222

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

x IDEC SmartRelay Manual

4.4.30 Analog math................................................................................225

4.4.31 Analog math error detection........................................................ 230

5 Configuring IDEC SmartRelay............................233

5.1 Selecting parameter assignment mode...................................... 234

5.1.1 Parameters..................................................................................235

5.1.2 Selecting the parameters.............................................................236

5.1.3 Modifying parameters..................................................................237

5.2 Setting the default values for IDEC SmartRelay........................ 239

5.2.1 Setting the time of day and date (FL1E-H12RC...)...................... 240

5.2.2 Setting the display contrast and backlight choice........................241

5.2.3 Setting the menu language ......................................................... 243

5.2.4 Setting the number of AIs in the base module ............................ 244

5.2.5 Setting the start screen................................................................245

6 IDEC SmartRelay memory



and battery cartridge (card)................................247

6.1 Security function (CopyProtect)..................................................250

6.2 Inserting and removing memory and battery cartridges .......... 252

6.3 Copying data from IDEC SmartRelay



to the memory cartridge............................................................... 254

6.4 Copying data from the memory cartridge



to IDEC SmartRelay....................... ... ......................... ... ... ... .......... 256

7 IDEC SmartRelay software..................................259

7.1 Connecting IDEC SmartR e lay to a PC ........................... ... .. ... ... ..261

8 Applications .........................................................263

8.1 Stairway or corridor lighting........................................................ 265

8.1.1 Requirements for a stairway lighting system....................... ... ..... 265

8.1.2 Previous solution........................................... ... ...........................265

8.1.3 Lighting system with IDEC SmartRelay............................... ... ..... 266

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

IDEC SmartRelay Manual xi

8.1.4 Special features and expansion options......................................268

8.2 Automatic door .............................................................................269

8.2.1 Requirements of an automatic door.............. ......................... ......269

8.2.2 Conventional solution ..................................................................270

8.2.3 Door control system with IDEC SmartRelay................................270

8.2.4 Special features and expansion options......................................273

8.2.5 Extended solution with FL1E-H12RCC .......................................273

8.3 Air-conditioning sys te m....................... ... ......................... ... ... ......276

8.3.1 Requirements for an air-conditioning system ............................. .276

8.3.2 Advantages of using IDEC SmartRelay........................... ............279

8.4 Factory door..................................................................................281

8.4.1 Requirements for a gate control system......................................281

8.4.2 Previous solution.........................................................................282

8.4.3 Extended IDEC SmartRelay solution...........................................284

8.5 Centralized control and monitoring of several factory doors. .. 285

8.5.1 Requirements for a gate control system......................................286

8.6 Luminous rows ............................. ... .. .......................... .. ...............289

8.6.1 Requirements for a lighting system.............................................289

8.6.2 Previous solution.........................................................................290

8.6.3 Luminous row control system with FL1E-H12RCC......................291

8.7 Service water pump............. ... ... ... ......................... ... ... .................293

8.7.1 Requirements for a control system of a service water pump.......294

8.7.2 Previous solution.........................................................................294

8.7.3 Service water pump system with FL1E-H12RCC........................295

8.7.4 Special features and expansions.................................................296

A Technical data......................................................297

A.1 General technical da ta.............................................. ... .. ...............297

A.2 Technical data: FL1E-H12RCC/FL1E-B1 2RCC .............. ............. 299

A.3 Technical data: FL1B-M08C2R2 ..................................................302

A.4 Technical data: FL1E-H12SND.....................................................305

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

xii IDEC SmartRelay Manual

A.5 Technical data: FL1B-M08B1S2 ................................................. 307

A.6 Technical data: FL1E-H12RCA/FL1E-B12RCA........................... 309

A.7 Technical data: FL1B-M08D2R2.................................................. 312

A.8 Technical data: FL1E-H12RCE/



FL1E-B12RCE and FL1B-M08B2R2.............................................314

A.9 Switching capacity and serv ice life of the relay outputs .......... 317

A.10 Technical data: FL1B-J2B2.......................................................... 318

A.11 Technical data: FL1D-K2B2, FL1D-K2BM2.................................319

A.12 Technical data: Text Display .......................................................320

B Determining the cycle time.................................321

C IDEC SmartRelay without display .....................325

D IDEC SmartRelay menu structure ......................329

D.1 IDEC SmartRelay base module ...................................................329

D.2 Text Display................................................................................... 331

E Type Numbers...... ............ ........... ............ ........... ..333

Index......................................................................335

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

IDEC SmartRelay Manual 1

1

Getting started with IDEC 
SmartRelay

Here’s IDEC SmartRelay

IDEC SmartRelay is a universal logic module made by IDEC
that integrate

s:

• Controls

• Operator and display panel with background lighting

• Power supply

• Int er fa ce fo r exp a nsion modules

• Interface for a memory cartridge, battery cartridge,
combined

memory/battery cartridge, IDEC SmartRelay

PC cable or USB PC cable

• Int er fa ce fo r an opti onal te xt disp la y (T D) mo d ule

• Pre-configured standard functions, for example, on-and
off-delays, cur

rent impulse relay and softkey

•Timers

• Digital and analog memory markers

• Inputs and outputs, according to the device type

What IDEC SmartRelay can do for you

IDEC SmartRelay offers solutions for domestic and
installa

tion

engineering applications such as stairway
lighting, external lighting, sun blinds, shutters, shop window
lighting and more; switch cabinet engineering, as well as for
mechanical and apparatus engineerin g such as gate control
systems, air-conditioning systems, rand ainwater pumps.

IDEC SmartRelay can also be implemented for special
contr

ol syste

ms in conservatories or greenhouses, for
control signal processing and, by connecting a
communication module such as an AS-i module, for
distributed local controlling of machines and processes.

Special versions without operator panel a nd display unit are
a

va

ilable for series production applications in small machine,

apparatus, switching cabinet and installation engineering.

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

2 IDEC SmartRelay Manual

Which devices are available?

IDEC SmartRelay Base is available in two voltage classes:

• Class 1  24 V, i.e.

12 V DC, 24 V DC, 24 V AC

• Class 2 > 24 V, i.e. 100...240 V AC/DC
IDEC SmartRelay Base is available in two versions:

• With display:

8

inputs and 4 outputs

• Without display (”

IDEC SmartRelay Pure”): 8 inputs and

4 outputs

Each version is integrated into four subunits, is equipped
with an e

xpansion interface and Text Display interface and
provides 39 pre-configured standard and special function
blocks for the creation of your circuit program.

Which expansion modules are available?

• IDEC SmartRelay digital modules are available for

o

peration

with 12 V DC, 24 V AC/DC and 100...240 V AC/

DC, and are equipped with four inputs and four outputs.

• IDEC SmartRelay analog modules are available for

o

peration

with 24 V DC and some with 12 V DC,
depending on the specific module. Each is equipped with
two analog inputs or two analog outputs.

The digital/analog modules are integrated in two or four
sub

un

its. Each one is equipped with two expansion

interfaces for connecting additional modules.

Which display modules are available?

• IDEC SmartRelay Base with display

• Text Display

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

IDEC SmartRelay Manual 3

Features of the Text Display

The Text Display is available with the FL1E series. It
provides an additional display that is wider than the Base
module. It has four function keys that you can program in
your circuit program as inputs. Like the IDEC SmartRelay
Base module, it has four cursor keys, an ESC key and an OK
key that you can also program in your circuit program and
use for navigation on the Text Display.

You can create and download a power-up screen for the
Tex

t D

isplay from WindLGC. This screen displays briefly
when you initially power on the Text Display. You can also
upload the power-up screen from the Text Display to
WindLGC.

The menus for the Text Display are shown in Appendix
sect

ion D.2. You

configure the settings for the Text Disp

lay
independently from the IDEC SmartRelay Base module . The
settings can be d

ifferent.

Which communication modules are available?

• IDEC SmartRelay communication module (CM) AS

interface, which is described

in more detail in a separate

documentation.
The communication module has four virtual inputs and

outputs, and

acts as an interface between an AS­Interface system and an IDEC SmartRelay system. The
module enables four data bits to be transferred from the
IDEC SmartRelay base module to the AS-Interface
system and vice versa.

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

4 IDEC SmartRelay Manual

It’s your choice

The various IDEC SmartRelay Base versions, expansion
modules, Text Display and communication modules offer
you a highly flexible and adaptive system to suit your specific
tasks.

The IDEC SmartRelay system offers you many solutions
such as

for small domes

tic installations, simple automation
tasks, and even complex engineering tasks involving its
integration into a bus system (e.g. communication mod ule
AS interface).

Note

IDEC SmartRelay base module may only be equipped with
expansion modules of the same voltage class. Mechanical
encoding pins in the housing prevent you from connecting devices
of a different voltage class.

Exception: The left-hand interface of an analog module or
communication module is galvanically isolated.

This type of expansion module can therefore be connected to
devices of a different voltage class. See also Chapter 2.1.

A Text Display, if used, can be connected only to an FL1E IDEC
SmartRelay base module.

Each IDEC SmartRelay base module supports the following
connections for the creation of the circuit program, regardless of the
number of connected modules:

• Inputs 11 to I24

• Analog inputs AI1 to AI8

• Outputs Q1 to Q16

• Analog outputs AQ1 and AQ2

• Memory Markers M1 to M27:

- M8: Startup marker

- M25: Backlight flag: IDEC SmartRelay Display

- M26: Backlight flag: Text Display

- M27: Message text character set flag

• Analog Memory Markers AM1 to AM6

• Shift register bits S1 to S8

• 4 cursor keys

• 16 blank outputs X1 to X16

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

I7 I8

Q1 Q2 Q3 Q4

4

L1 N

09

I5 I6I2 I3 I4I1

72

55

53

1 2 1 2 1 2 1 2

6

IDEC SmartRelay Base 

(e.g.: FL1E-H12RCC)

Q4

Q1 Q2

L1 N I2 I3 I4I1

36

09

53

4

Q3

RUN/STOP

53

1 2 1 2

1 2 1 2

IDEC SmartRelay 

expansion module 

(e.g.: FL1B-M08C2R2)

Getting started with IDEC SmartRelay

IDEC SmartRelay Manual 5

The IDEC SmartRelay structure

Power supply Control panel 

(not for FL1E­B12...)

Mechanical coding
pins

Inputs LCD 

(not for FL1E­B12...)

Mechanical coding
sockets

Outputs RUN/STOP

indicator

Slide

Module slot
with cap

Expansion
interface

Text Display
cable connector

Version number

(example: 

represents Version 1.)

15926103711481213

X 2
3 4

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

I7 I8

Q1 Q2 Q3 Q4

4

L+ M

4

6

5

09

I5 I6I2 I3 I4I1

72

55

53

1 2 1 2 1 2 1 2

IDEC SmartRelay Base 

(e.g.: FL1E-H12RCE)

Q3 Q4

Q1 Q2

L+ M I2 I3 I4I1

09

4

36

53

53

RUN/STOP

1 2 1 2

1 2 1 2

IDEC SmartRelay 

expansion module 

(e.g.: FL1B-M08B2R2)

Getting started with IDEC SmartRelay

6 IDEC SmartRelay Manual

Power supply Control panel 

(not for FL1E­B12...)

Mechanical coding
pins

Inputs LCD 

(not for FL1E­B12...)

Mechanical coding
sockets

Outputs RUN/STOP

indicator

Slide

Module slot
with cap

Expansion
interface

Text Display
cable connector

Version number

15926103711481213

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

IDEC SmartRelay Manual 7

FL1B-J2B2

I1

PE

INPUT2x(0..10V/0..20mA)

L+ M

09

M1U1 M2U2I2

4

L+ M

RUN/STOP

36 53

53

FL1D-K2B2

Power supply Mechanical

coding pins

PE terminal, for
connecting earth and
the shielding of
analog measuring
cables.

Inputs Mechanical

coding sockets

RUN/STOP
indicator

Slide Version number

Expansion interface

Power supply Expansion

interface

Slide

Outputs Mechanical

coding pins

PE terminal, for
connecting earth

Version number

RUN/STOP
indicator

Mechanical
coding sockets

191221071113818112912710

13

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

8 IDEC SmartRelay Manual

FL1D-K2BM2

V1+

OUTPUT 2x(0..10V or 0/ 4..20mA)

L+M

36

RU N / ST O P

1

7

9

9

88

M1PEM2V2+

4

L+M

2

11

10

12

53

90

35

13

I2I1

Power supply Expansion

interface

Slide

Outputs Mechanical

coding pins

PE terminal, for
connecting earth

Version number

RUN/STOP
indicator

Mechanical
coding sockets

1811291271013

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

IDEC SmartRelay Manual 9

Text Display

 Communication interface
 Power supply

The Text Display includes a wid

er

display area than the
IDEC SmartRelay Display. It includes four programmable
cursor keys, four programmable function keys, and a n ESC
and OK key. You use the included Text Display cable to
connect from the communication interface on the right side
of the Text Display to the corresponding interface on the left
side of the IDEC SmartRelay base module.

How to identify the IDEC SmartRelay

The IDEC SmartRelay identifier informs you of various
pr

operties

.
Base module
FL1E-
 B: Base module without display 

H: Base module with display

 Number of Inputs and Outputs
 R: Relay output S: Tr. (source) output
 C: With clock N: Without clock
 D: 24V DC E: 12/24V DC A: 24V AC/DC

B: 100...240V AC C: 100...240V AC/DC

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

10 IDEC SmartRelay Manual

Expansion module
Digital module
FL1B-M

 Number of Inputs and Outputs
 B1: 24V DC B2: 12/24V DC

C2: 100...240V AC/DC D2: 24V AC/DC

 S: Tr. (source) output R: Relay output
 Terminal type 2: non-removable terminal

Analog input module
FL1B-J
 Number of Inputs

 Resolution B: 10bit
 Terminal type 2: non-removable terminal

Analog output module
FL1D-K
 Number of Outputs

 Resolution B: 10bit
 blank: 0 ... 10V M: 0 ... 10V, 0/4 ... 20 mA
 Terminal type 2: non-removable terminal

Communication module
FL1B-
 C: Communication module

 AS: AS-Interface
 blank: AS-Interface rated voltage (30V DC) C1: 24V AC/

DC

 Terminal type 2: non-removable terminal
Text Display

FL1E-
 RD: Remote Display
 Version type

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

IDEC SmartRelay Manual 11

Symbols

Version with display unit is equipped with 8 inputs and 4 outputs

Version without display unit is equipped with 8 inputs and 4 outputs

The digital module is equipped with 4 digital inputs and 4 digital
outputs

The analog module is equipped with 2 analog inputs or two analog
outputs, according to the device type

The communication module (CM); for example, AS Interface is
equipped with 4 virtual inputs and 4 virtual outputs

The Text Display

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

12 IDEC SmartRelay Manual

Versions

The following IDEC SmartRelay versions are available:

(1): Of those can be used alternatively: 4 analog inputs (0 ... 10V) and 4 fast inputs.
(2): AC versions: Two groups consisting of 4 inputs each. Each input within a group

must be connected to the same phase. It is possible to interconnect groups with
a different phase.

(3): The digital inputs can be operated with P or N action.

Symbol Designation Supply

volta

ge

I

nputs Outputs Properties

FL1E-H12RCE 12/24 V DC 8 digital

(1)

4 relays 
(10 A)

FL1E-H12SND 24 V DC 8 digital

(1)

4 solid state 
24V / 0.3A

no clock

FL1E-H12RCA

(3)

24 V AC/
24 V DC

8 digital 4 relays

(10A)

FL1E-H12RCC

(2)

100...240 V
AC/DC

8 digital 4 relays

(10A)

FL1E-B12RCE 12/24 V DC 8 digital

(1)

4 relays
(10A)

no display unit
no keyboard

FL1E-B12RCA

(3)

24 V AC /
24 V DC

8 digital 4 relays

(10A)

no display unit
no keyboard

FL1E-B12RCC

(2)

100...240 V
AC/DC

8 digital 4 relays

(10A)

no display unit
no keyboard

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

IDEC SmartRelay Manual 13

Expansion modules

The following expansion modules can be con nected to IDEC
SmartRelay:

(1): Different phases are not allowed within the inputs.
(2): 0 ... 10 V, 0 ... 20 mA can be connected optionally.
(3): Digital inputs can be operated either with P or with N action.
(4): 0 ... 10 V, 0/4 ... 20 mA can be connected optionally.

Communication modules

The following communication modules can be co nnected
to IDEC

SmartRelay:








Text Display Module

The following Text Display module is available:

Symbol Name Power supply Inputs Outputs

FL1B-M08B2R2 12/24 V DC 4 digital 4 relays (5A)
FL1B-M08B1S2 24 V DC

4 digital 4 solid state 24V

/ 0.3A

FL1B-M08D2R2

(3)

24 V AC/DC 4 digital 4 relays (5A)

FL1B-M08C2R2 100...240 V

AC/DC

4 digital

(1)

4 relays (5A)

FL1B-J2B2 12/24 V DC 2 analog

0 ... 10V or 
0 ... 20mA

(2)

none

FL1D-K2B2 24 V DC none 2 analog

0 ... 10 V DC

FL1D-K2BM2 24 V DC none 2 analog

0 ... 10 V DC,
0/4 ... 20 mA

(4)

Symbol Name Power supply Inputs Outputs

IDEC Smart­Relay CM AS
Interface

30 V DC the

next four inputs
after the physical
inputs of IDEC
SmartRelay
(I

n

... I

n+3

)

the next four
outputs after the
physical outputs of
IDEC SmartRelay
(Q

n

... Q

n+3

)

Symbol Name Supply voltage Display

Text Display 24 V AC/DC

12 V DC

LCD (128 x 64)
4-row display

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

14 IDEC SmartRelay Manual

Certification and approvals

IDEC SmartRelay is certified to cULus and FM.

• cULus Haz. Loc.
Underwriters Laboratories Inc. (UL) to

- UL 508 (Industrial Control Equipment)

- CSA C22.2 No. 142 (Process Control Equipment)

- UL 1604 (Hazardous Location)

- CSA–213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx
Class I, Zone 2, Group IIC Tx

•

FM Approval
Factory Mutual Research (FM) to
Appro

val Standard Class Number 3611, 3600, 3810
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx
Class I, Zone 2, Group IIC Tx
For further information, see our Internet address

Note

You will find current approvals on the rating plate of the relevant
module.

IDEC SmartRelay is issued with the CE Certificate of
Conformity. It is compliant with IEC 60730 -1 and IEC 61131­2 and interference-proof to EN 55011, Limit Class B.

Marine certification has been requested.

• ABS (American Bureau of Shipping)

• BV (Bureau Veritas)

• DNV (Det Norske Veritas)

• GL (Germanischer Lloyd)

• LRS (Lloyds Register of Shipping)

• Class NK (Nippon Kaiji Kyokai)
IDEC SmartRelay modules are there

fore suitable for

use in
industrial and residential areas. Use in Class I, Division 2,
Group A, B, C and D locations or in non- hazardous locations
is supported.

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

IDEC SmartRelay Manual 15

Marine certification requires the surge protective device what
manufactured by DEHN+SÖHNE GmbH+Co., in a case of
12/24V DC or 24V DC power line. The required Type No. and
Part No.: BVT AD 24, 918 402. See Note on page 298.
For further information, see our Internet address

✔

ID for Australia

Recycling and Disposal

IDEC SmartRelay units can be fully recycled , du e to the ir
low-

pollutant equip

ment. Contact a certified electronic waste
disposal center for environmentally accept able recycling and
disposal of your old devices.

Our products carrying the label shown at the side are compliant
with AS/NZS 2064:1997 (Class A) standard.

!

Warning

Risk of death, personal injury or property damage can occur if you
do not follow safety precautions for hazardous locations.

In potentially explosive atmospheres, do not disconnect
connectors when the system is in RUN. Always switch off the
power supply to IDEC SmartRelay and its components before you
disconnect any connectors or components.

Substitution of components can impair suitability for Class I,
Division 2 locations. Combinations of equipment are subject to
investigation by the local authority having jurisdiction at the time of
installation.

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

Getting started with IDEC SmartRelay

16 IDEC SmartRelay Manual

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]