IC Realtime Mobile DVR User Manual

Mobile DVR User’s Manual

Table of Contents

1 FEATURES AND SPECIFICATIONS.................................................................. 8

2 OVERVIEW AND CONTROLS .........................................................................10

2.1 Front Panel ...........................................................................................................................................10

2.2 Remote Control....................................................................................................................................10

2.3 Mouse Control......................................................................................................................................11

3 INSTALLATION AND CONNECTIONS............................................................. 14

3.1 Check Unpacked DVR........................................................................................................................14

3.2 Device installation................................................................................................................................14

4 OVERVIEW OF NAVIGATION AND CONTROLS ............................................ 15

4.1 Login, Logout & Main Menu ...............................................................................................................15

4.1.1 Login ................................................................................................................................................. 15

4.1.2 Main Menu ....................................................................................................................................... 15

4.1.3 Logout............................................................................................................................................... 16

4.1.4 Auto Resume after Power Failure ................................................................................................ 16

4.2 Recording Operation...........................................................................................................................16

4.2.1 Live Viewing..................................................................................................................................... 16

4.2.2 Manual record.................................................................................................................................. 17

4.3 Search & Playback ..............................................................................................................................19

4.3.1 Search Menu ................................................................................................................................... 19

4.3.2 Basic Operation............................................................................................................................... 20

4.4 Record Setup (Schedule) ...................................................................................................................21

4.4.1 Schedule Menu .................................................................................................................................... 21

4.4.2 Basic Operation.................................................................................................................................... 21

4.5 Detect ....................................................................................................................................................23

4.5.1 Go to Detect Menu............................................................................................................................... 23

4.5.2 Detect..................................................................................................................................................... 23

4.5.3 Video Loss.............................................................................................................................................25

4.5.4 Camera Mask Detect........................................................................................................................... 26

4.6 Alarm Setup and Alarm Activation ....................................................................................................27

4.6.1 Go to alarm setup interface ...........................................................................................................27

4.6.2 Alarm setup...................................................................................................................................... 27

4.7 Backup ..................................................................................................................................................29

4.7.1 Detect Device....................................................................................................................................... 29

4.7.1 Backup (Including one-button backup)........................................................................................30

4.8 PTZ Control and Color Setup ............................................................................................................ 32

4.8.1 Cable Connection ................................................................................................................................ 32

4.8.2 PTZ Setup.............................................................................................................................................32

4.8.3 3D Intelligent Positioning Key............................................................................................................ 34

4.9 Preset/ Patrol/Pattern/Scan................................................................................................................34

4.9.1Preset Setup .........................................................................................................................................35

4.9.2 Activate Preset..................................................................................................................................... 35

4.9.3 Patrol setup (Tour Setup)................................................................................................................... 35

4.9.4 Activate Patrol (tour) ........................................................................................................................... 36

4.9.5 Pattern Setup.......................................................................................................................................36

4.9.6 Activate Pattern Function...................................................................................................................36

4.9.7 Auto Scan Setup .................................................................................................................................36

4.9.8 Activate Auto Scan.............................................................................................................................. 37

4.10 Flip .........................................................................................................................................................37

5 UNDERSTANDING OF MENU OPERATIONS AND CONTROLS ................... 38

5.1 Menu Tree ............................................................................................................................................38

5.2 Main Menu ............................................................................................................................................38

5.3 Setting ...................................................................................................................................................39

5.3.1 General............................................................................................................................................. 39

5.3.2 Encode .............................................................................................................................................41

5.3.3 Schedule .......................................................................................................................................... 42

5.3.4 RS232............................................................................................................................................... 42

5.3.5 Network ............................................................................................................................................ 43

5.3.6 Alarm................................................................................................................................................. 50

5.3.7 Detect ...............................................................................................................................................50

5.3.8 Pan/Tilt/Zoom .................................................................................................................................. 50

5.3.9 Display..............................................................................................................................................51

5.3.10 Default.......................................................................................................................................... 52

5.4 Search ...................................................................................................................................................53

5.5 Advanced ..............................................................................................................................................53

5.5.1 HDD Management..........................................................................................................................54

5.5.2 Alarm Output....................................................................................................................................55

5.5.3 Abnormity .........................................................................................................................................55

5.5.4 Manual Record................................................................................................................................56

5.5.5 Account.............................................................................................................................................56

5.5.6 Auto Maintain................................................................................................................................... 57

5.5.7 TV Adjust.......................................................................................................................................... 57

5.6 Information............................................................................................................................................58

5.6.1 HDD Information ............................................................................................................................. 58

5.6.2 BPS...................................................................................................................................................59

5.6.3 Log .................................................................................................................................................... 59

5.6.4 Version .............................................................................................................................................60

5.6.5 Online Users....................................................................................................................................60

5.7 Exit .........................................................................................................................................................60

6 WEB CLIENT OPERATION .............................................................................. 62

6.1 Network Connection............................................................................................................................62

6.2 Login......................................................................................................................................................62

6.2.1 Real-time Monitor............................................................................................................................ 65

6.2.2 PTZ ...................................................................................................................................................66

6.2.3 Color .................................................................................................................................................69

6.2.4 Picture Path and Record Path ......................................................................................................69

6.2.5 Menu Interface Switch.................................................................................................................... 70

6.3 Configure ..............................................................................................................................................71

6.3.1 System Information......................................................................................................................... 71

6.3.2 Setting............................................................................................................................................... 73

6.4 Search ...................................................................................................................................................93

6.4.1 Download ......................................................................................................................................... 94

6.5 Alarm .....................................................................................................................................................95

6.6 About .....................................................................................................................................................95

6.7 Log out ..................................................................................................................................................96

6.8 Un-install Web Control........................................................................................................................96

APPENDIX A HDD CAPACITY CALCULATION ...................................................... 97

APPENDIX B COMPATIBLE USB DRIVE LIST ....................................................98

APPENDIX C COMPATIBLE CD/DVD BURNER LIST.......................................... 99

Welcome

Thank you for purchasing our DVR! This operating manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series DVR features and functions, as well as a detailed menu tree. Before installation and operation please read the following safeguards and warnings carefully!

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.

2．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.

3．Installation

Keep upwards. Handle with care. Do not apply power to the DVR before completing installation. Do not place objects on the DVR

4．Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment

The DVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc.

6. Accessories

Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included:

1 FEATURES AND SPECIFICATIONS

Specification

OS LINUX Operation Interface Graphic user interface Operation Method 1.Remote control 2.Mouse

3.Network keyboard 4.Network

1.Power input port

2.Audio/Video input port

3.Video output port

4.Audio output port

5.High-speed USB2.0 port

6.RS232 port

External Interface

7.RJ45 network port

Storage Device 2.5 inches HDD as the main storage device

1.Automatically begin record once boots up

2. Schedule auto record. Delayed turn off.

Record Mode

3.Activation record once alarm occurs

1.Time

2.Alarm

Search(support search engineers)

3.Channel

1.Freely switch video playback file

System

Playback Mode

Playback Control

2. Integrate multiple playback speeds such as normal playback, slow speeds or fast speeds.

Video 4-Ch real-time record Record Audio 4-ch audio input

Video Input Format/Standard

PAL（625 Line，50f/s）/NTSC（525 Line， 60f/s）

Port BNC Input

Resistance

75Ω

Video Input Port Parameter

Input Signal 1.0Vp-p Port BNC Output

Resistance

75Ω

Video Output Port Parameter

Output Signal 1.0Vp-p

Real-time Monitor Video Resolution

704×576（PAL）/720×480（NTSC）

Real-time Monitor Plane Definition

440 TV Line

Record Compression Method

H.264

PAL： 1-25f/s(Adjustable)

Video Record Speed

NTSC：1-30f/s(Adjustable) PAL： 352×288

Record Resolution

CIF

NTSC：360×240

Record Video Quality 1-6 level (Adjustable) Playback Plane Resolution 240 TV Line

Time information Channel information

Record

Record Video Information

Vehicle information

Plate number Temperature

Record Backup Method High-speed USB2.0 mobile device support local

backup.

Record Video Bit stream

1-ch CIF：40～460MB/H（Depends on the video content）

Record file Way Create a file at 10M/15M/20M/30M/60M

Port BNC Input

Resistance

20KΩ

Audio Input Port Parameter

Input Signal

200～2800mV

Port BNC Output

Resistance

1KΩ

Audio Output Port Parameter

Output Signal

200～2800mV

Audio Output Signal to Noise Ratio

≥75dB

Sampling Frequency

8KHz Audio

Sampling

Sampling Bit 16-bit Audio Encode Method PCM Audio Bit Stream 56.25MB/H

Auxiliary Function

Scheduled boot up Support scheduled boot up function to make sure

there are recorded video in the specified period,

Vibration

≥8 H@ frequency 0～100Hz，Extent:10MM

Rated Power

+12V / +24V / +42V（+8V～+60V）

Rated Current

≤1A（Including HDD）

Start Current ≤1.5A Average Power

10W（Including HDD）

Temperature

0℃～+60℃（Ordinary HDD）

Humidity

10%～95%

Atmosphere Pressure

86Kpa～106Kpa

Net Weight

1.7Kg（Including HDD）

Unit Dimension 179(W)×54(H)×185(D) mm

Others

Installation Rack Installation

Features and specification are subject to change without prior notice.

2 OVERVIEW AND CONTROLS

This section provides information about front panel and rear panel. If you install this series DVR for the first time, please refer to this part first.

2.1 Front Panel

This series DVR front panel is shown as in Figure 2-1 .

Figure 2-1

① USB 2.0 data port

② Power indication light: It becomes on when connect device to the power.

③ 1-4ch record status indication light: It becomes on when record. It flashes

when there is abnormal situation.

④ backup indication light: It flashes when system backups. It becomes on when

backup completes.

⑤ Upgrade indication light.

⑥ 1-4ch alarm input light. It becomes on when there is input alarm.

⑦ .2-ch alarm output indication light. It becomes on when there is output alarm.

⑧ Door key

⑨ IR remote control receiver.

2.2 Remote Control

The remote control interface is shown as in Figure 2-2.

Figure 2-2

SN Name Function

1 View Video switch 2 ID Press this button and then input DVR serial

number to control this DVR

3 Numeral 0-9 number key. You can input password,

numeral or switch channel 4 Record Record video 5 Aux Auxiliary key

Enter Confirm /menu key Menu Pop up menu Esc Cancel

W X

Direction keys

Direction keys in PTZ control



Stop

Zoom- in PTZ control

Slow play



Playback/Pause

Zoom + in PTZ control



Backward

│_

Previous section



Forward



Slow forward: Various slow play speeds and normal

Playback mode.

Focus- in PTZ control

f│

Next section



Fast forward: Various fast forward speeds and normal

playback mode.

Focus + in PTZ control 8

F1 One-key backup button

F2 Reserved for future use

10 F3 Reserved for future use

2.3 Mouse Control

System pops up password input dialogue box if you have not logged in.

In real-time monitor mode, you can go to the main menu.

When you have selected one menu item, left click mouse to view menu

content.

Implement the control operation.

Modify checkbox or motion detection status.

Click combo box to pop up drop down list

Left click

mouse

In input box, you can select input methods. Left click the corresponding

button on the panel you can input numeral/English character

(small/capitalized). Here ← stands for backspace button. ＿ stands for space

button.

In English input mode: _stands for input a backspace icon and ← stands for

deleting the previous character.

In numeral input mode: _ stands for clear and ← stands for deleting the previous numeral.

When input special sign, you can click corresponding numeral in the front panel to input. For example, click numeral 1 you can input“/” , or you can click the numeral in the on-screen keyboard directly.

Implement special control operation such as double click one item in the file

list to playback the video.

Double left

click mouse

In multiple-window mode, double left click one channel to view in full-window.

Double left click current video again to go back to previous multiple-window

mode. Exit main menu and go to the preview interface.

Right click

mouse

Exit current menu without saving the modification.

In numeral input box: Increase or decrease numeral value. Press

middle

Switch the items in the check box.

button Page up or page down

Move

mouse

Select current control or move control

Select motion detection zone Drag mouse

Select privacy mask zone.

3 Installation and Connections

Note: All the installation and operations here should conform to your local electric safety rules.

3.1 Check Unpacked DVR

When you receive the DVR from the shipping agency, please check whether there is any visible damage to the DVR appearance. The protective materials used for the package of the DVR can protect most accidental clashes during transportation. Then you can open the box to check the accessories. Please check the items in accordance with the list on the warranty card. Finally you can remove the protective film of the DVR.

3.2 Device installation

Please refer to Vehicle DVR Installation Manual.

4 Overview of Navigation and Controls

Before operation, please make sure you have properly installed HDDs and all the cable connections.

4.1 Login, Logout & Main Menu

4.1.1 Login

Turn the key to ACC, you can see power indication light becomes on and DVR boots up (DVR boots up might take several seconds). System is in multiple-window preview mode after boots up and record setup is continuous record mode. You can see corresponding channel indication light becomes on and record indication light becomes on too. After the system boots up, default video display is in multiple-window mode. Click Enter or left click mouse, you can see the login interface. See Figure 4-1. System consists of four accounts:

z Username: admin. Password: admin. (administrator, local and network) z Username: 888888. Password: 888888. (administrator, local only) z Username: 666666. Passwords: 666666(Lower authority user who can only

monitor, playback, backup and etc.) z Username: default. Password: default(hidden user) For your system security, please modify you password after first login. You can use USB mouse, front panel, remote controller or keyboard to input.

About input method: Click to switch between numeral, English character

(small/capitalized) and denotation.

Figure 4-1

4.1.2 Main Menu

When you logged in, the system main menu is shown as below. See

Figure 4-2. There are total six icons: search, information, setting, backup, advanced and shutdown. Move the cursor to highlight the icon, then left click mouse to enter the sub-menu.

Figure 4-2

4.1.3 Logout

There are two ways for you to log out. One is from menu option: In the main menu, click shutdown button, you can see an interface is shown as below. See

Figure 4-3.

Figure 4-3

There are several options for you. See Figure 4-4.

Figure 4-4

The other way is to press power button on the front panel for at least 3 seconds, system will stop all operations. Then you can click the power button in the rear panel to turn off the DVR. System supports ACC delaying function. The value ranges from 0 to 255(Unit: minute). System can delay shutting down for the specified time and then turn off.

4.1.4 Auto Resume after Power Failure

The system can automatically backup video and resume previous working status after power failure.

4.2 Recording Operation

4.2.1 Live Viewing

After you logged in, the system is in live viewing mode. You can see system date, time and channel name. Here you can also view longitude, latitude and vehicle speed. If you want to change system date and time, you can refer to general settings (Main Menu->Setting->General). If you want to change the channel name, please refer to the display settings (Main Menu->Setting->Display). See Figure 4-4.

Figure 4-5

Note: Please refer to the following sheet for channel status. stands for opening

switch function, stands for closing switch function.

4.2.2 Manual record Note:

You need to have proper rights to implement the following operations. Please make sure the HDDs have been properly installed.

4.2.2.1 Manual record menu There are two ways for you to go to manual record menu.

Recording status

Video loss

Motion detection

Camera lock

5 LON

longitude

6 LAN

Latitude

SOG

Vehicle speed

Longitude/latitude and vehicle speed

z Right click mouse or in the main menu, Advanced->Manual Record. z In live viewing mode, click record button in the front panel or record button in the

remote control.

Manual record menu is shown as in Figure 4-6.

4.2.2.2 Basic operation There are three statuses: schedule/manual/stop. Highlight icon“○” to select corresponding channel. z Manual: the highest priority. After manual setup, all selected channels will begin

ordinary recording.

z Schedule: channel records as you have set in recording setup (Main Menu-

>Setting->Schedule)

z Stop: all channels stop recording.

Figure 4-6

4.2.2.3 Enable/disable record

Please check current channel status: “○” means it is not in recording status,

“●” means it is in recording status.

You can use mouse or direction key to highlight channel number. See Figure 4-7.

Figure 4-7

4.2.2.4 Enable all channel recording

Highlight ○ below All, you can enable all channel recording. z All channel schedule record Please highlight “ALL” after “Schedule”. See Figure 4-8. When system is in schedule recording, all channels will records as you have previously set (Main menu->Setting->Schedule). The corresponding indication light in front panel will turn on.

Figure 4-8

z All channel manual record Please highlight “ALL” after “Manual.” See Figure 4-9. When system is in manual recording, all scheduled set up you have set in will be null ((Main menu->Setting->Schedule)). You can see indication light in front panel turns on, system begins manual record now.

Figure 4-9

4.2.2.5 Stop all channel recording Please highlight “ALL” after “Stop”. See Figure 4-10. System stops all channel recording no matter what mode you have set in the menu (Main menu->Setting->Schedule)

Figure 4-10

4.3 Search & Playback

4.3.1 Search Menu

There are two ways for you to go to search menu.

z Click Pause/Play button in the remote control. z Click search in the main menu.

Search interface is shown as below. See Figure 4-11. Usually there are three file types:

z R: regular recording file. z A: external alarm recording file. z M: motion detection recording file

There are several playback windows. This System supports 1-ch playback.

Figure 4-11

Please refer to the following sheet for more information.

Serial Number Function

1 Play 2 Backward 3 Stop 4 Slow play 5 Fast play 6 Previous frame 7 Next frame 8 Volume 9 Previous file 10 Next channel 11 Next file 12 Previous channel 13 Search 14 Backup

4.3.2 Basic Operation

4.3.2.1 Playback There are various search modes: video type, channel number or time. The system can max display 128 files in one screen. You can use up/down button to turn page.

Select the file name and double click mouse (or click enter button), you can view file content.

4.3.2.2 Accurate playback Input time (h/m/s) in the time column and then click playback button, system can operate accurate playback.

4.3.2.3 Synchronized playback function when playback During playback process, click numeral key, system can switch to the corresponding channel video of the same time.

4.3.2.4 Digital zoom When the system is in full-screen playback mode, drag your mouse in the screen to select a section and then left click mouse to realize digital zoom. You can right click mouse to exit.

4.3.2.5 File backup System supports backup operation during search. You can draw a √ before file name (multiple choices). Then click backup button (Button 14 in Figure 4-11). Note: All the operations here (such as playback speed, channel, time and progress) have relationship with hardware version. Some series DVRs do not support some functions or playback speeds.

4.4 Record Setup (Schedule)

When the system boots up, it is in default 24-hour regular mode. You can set record type and time in schedule interface.

4.4.1 Schedule Menu

In the main menu, from setting to schedule, you can go to schedule menu. See Figure 4-12. There are three record types: R-Regular, MD-Motion detection, A- Alarm.

Figure 4-12

4.4.2 Basic Operation

There are total six periods. See Figure 4-12. z Channel: Please select the channel number first. You can select “all” if you want

to set for the whole channels.

z Week day: There are eight options: ranges from Saturday to Sunday and all.

z Redundancy: System supports redundancy backup function. You can highlight

Redundancy button to activate this function. Please note, before enable this function, please set at least one HDD as redundant. Refer to the manual for detailed information.

z Prerecord: System supports prerecord function. The previous one to three

seconds video before alarm occurs can be included in recorded video.

z Snapshoot: You can enable this function to snapshoot image when alarm occurs. z Record types: There are three types: regular, motion detection (MD) and Alarm.

Please highlight icon to select the corresponding function. After all the setups please click save button, system goes back to the previous menu.

At the bottom of the menu, there is a color bar for your reference. Green stands for regular recording, yellow stands for motion detection and red stands for alarm recording.

4.4.1.1 Quick Setup This function allows you to copy one channel setup to another. After setting in channel 1, you can click paste button and turn to channel 2 and then click copy button. You can finish setting for one channel and then click save button or you can finish all setup and then click save button to memorize all the settings.

4.4.1.2 Redundancy Redundancy function allows you to memorize record file in several disks. These files are created, packaged and closed simultaneously. When there is file damage occurred in one disk, there is a spare one in the other disk. You can use this function to maintain data reliability and safety. In the main menu, from Setting to Schedule, you can highlight redundancy button to enable this function. See Figure 4-12. In the main menu, from Advanced to HDD management, you can set one or more disk(s) as redundant. You can select from the dropdown list. See Figure 4-13. System auto overwrites old files once hard disk is full. Please note only read/write disk or read-only disk can backup file and support file search function, so you need to set at least one read-write disk otherwise you can not record video.

Note:

About redundancy setup please note: z If current channel is not recording, current setup gets activated when the channel

begin recording the next time.

z If current channel is recording now, current setup will get activated right away, the

current file will be packet and form a file, then system begins recording as you

have just set. After all the setups please click save button, system goes back to the previous menu.

Figure 4-13 Playback or search in the redundant disk. There are two ways for you to playback or search in the redundant disk. z Set redundant disk(s) as read-only disk or read-write disk (Main menu-

>Advanced->HDD management). See Figure 4-13.System needs to reboot to get setup activated. Now you can search or playback file in redundant disk.

z Dismantle the disk and play it in another PC.

4.5 Detect

4.5.1 Go to Detect Menu

In the main menu, from Setting to Detect, you can see motion detect interface. See Figure 4-14.

4.5.2 Detect

Detection menu is shown as below. See Figure 4-14.

z Channel: select the channel you want to implement motion detection. z Event type: from the dropdown list you can select motion detection type. z Channel: select the channel to activate recording function once alarm occurred.

Please make sure you have set MD record in encode interface(Main Menu>Setting->Schedule) and schedule record in manual record interface(Main Menu>Advanced->Manual Record)

z Latch: when motion detection completed, system auto delays detecting for a

specified time. The value ranges from 10-300(Unit: second)

z Region: Click select button, the interface is shown as in

Figure 4-15.Here you can

set motion detection zone. There are 396(PAL)/330(NTSC) small zones.

z Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity. z Show message: System can pop up a message to alarm you in the local host

screen if you enabled this function.

z Send email: System can send out email to alert you when alarm occurs. z PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go

to preset, tour &pattern when there is an alarm. Click “select” button, you can see an interface is shown as in

Figure 4-16.

z Period: Click set button, you can see an interface is shown as in Figure 4-17.

Here you can set for business day and non-business day. In Figure 4-17, click set

button, you can see an interface is shown as in Figure 4-18. Here you can set your own setup for business day and non-business day.

z Anti-dither: Here you can set anti-dither time. z Sensitivity: there are six levels. The sixth level has the highest sensitivity. z Alarm output: when alarm occurred, system enables peripheral alarm devices. z Tour: Here you can enable tour function when alarm occurs. It is a one-window

tour. Please go to chapter 5.3.9 Display for tour interval setup.

z Snapshot: System can snapshoot when alarm occurs.

Please highlight icon to select the corresponding function. After all the setups please click save button, system goes back to the previous menu.

Note:

In motion detection mode, you can not use copy/paste to set channel setup since the video in each channel may not be the same. In Figure 4-15, you can left click mouse and then drag it to set a region for motion detection. Click Fn to switch between arm/withdraw motion detection. After setting, click enter button to exit.

Figure 4-14

Figure 4-15

Figure 4-16

Figure 4-17

Figure 4-18

4.5.3 Video Loss

In Figure 4-14, select video loss in the Type item. You can see the interface is shown as in

Figure 4-19.This function allows you to be informed when video loss phenomenon occurred. You can enable alarm output channel and then enable show message function.

z Channel: select the channel you want to enable lens shading alarm. z Event type: please select video loss. z Channel: select the channel to record when video loss occurred. z Alarm output: activate peripheral alarm device when video loss occurred. z Latch: when motion detection complete, system auto delays detecting for a

specified time. The value ranges from 10-300(Unit: second)

z Show message: System can pop up a message to alarm you in the local host

screen if you enabled this function.

z Send email: System can send out email to alert you when alarm occurs.

z PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go

to preset, tour & pattern when there is an alarm. Click “select” button, you can see an interface is shown as in Figure 4-16.

z Period: Click set button, you can see an interface is shown as in Figure 4-17.

Here you can set for business day and non-business day. In Figure 4-17, click set button, you can see an interface is shown as in Figure 4-18. Here you can set your own setup for business day and non-business day.

z Sensitivity: there are six levels. The sixth level has the highest sensitivity. z Alarm output: when alarm occurred, system enables peripheral alarm devices. z Tour; Here you can enable tour function when alarm occurs. It is a one-window

tour. Please go to chapter 5.3.9 Display for tour interval setup.

z Snapshot: System can snapshoot when alarm occurs.

Figure 4-19

4.5.4 Camera Mask Detect

When someone viciously masks lens, the system can alert you to guarantee video continuity. Camera mask detection interface is shown as in Figure 4-20.

z Channel: select the channel you want to enable camera mask detection function. z Event type: please select camera mask detect from the dropdown list. z Channel: select the channel to record when camera mask occurred. z Alarm output: activate peripheral alarm device when camera mask occurred. z Enable tour: Here is for you to activate tour between different cameras. z Latch: when motion detection complete, system auto delays detecting for a

specified time. The value ranges from 10-300(Unit: second)

z Show message: System can pop up a message to alarm you in the local host

screen if you enabled this function.

z Send email: System can send out email to alert you when alarm occurs. z PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go

to preset, tour &pattern when there is an alarm. Click “select” button, you can see an interface is shown as in Figure 4-16.

z Period: Click set button, you can see an interface is shown as in Figure 4-17.

z Sensitivity: there are six levels. The six-level has the highest sensitivity. z Alarm output: when alarm occurred, system enables peripheral alarm devices. z Tour: Here you can enable tour function when alarm occurs. It is a one-window

tour: Please go to chapter 5.3.9 Display for tour interval setup.

z Snapshoot: System can snapshoot when alarm occurs.

Note:

In this interface, copy/paste function is only valid for the same type, which means you can not copy a channel setup in video loss mode to camera mask detect mode.

Figure 4-20

4.6 Alarm Setup and Alarm Activation

Before operation, please make sure you have properly connected alarm devices such as buzzer.

4.6.1 Go to alarm setup interface

In the main menu, from Setting to Alarm, you can see alarm setup interface. See Figure 4-21.

4.6.2 Alarm setup

Alarm interface is shown as below. See

Figure 4-21.

z Alarm in: here is for you to select channel number. z Event type: there are two types. One is local input and the other is network input. z Type: normal open or normal close.

z PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go

to preset, tour& pattern when there is an alarm. Click “select” button, you can see an interface is shown as in Figure 4-25.

z Period: Click set button, you can see an interface is shown as in Figure 4-23.

Here you can set for business day and non-business day. In Figure 4-23, click set button, you can see an interface is shown as in Figure 4-24. Here you can set your own setup for business day and non-business day.

z Anti-dither: Here you can set anti-dither time. z Show message: System can pop up a message to alarm you in the local host

screen if you enabled this function.

z Send email: System can send out email to alert you when alarm occurs. z Record channel: you can select proper channel to record alarm video (Multiple

choices). At the same time you need to set alarm record in schedule interface (Main Menu->Setting->Schedule) and select schedule record in manual record interface (Main Menu->Advance->Manual Record).

z Latch: Here is for you to set proper delay duration. Value ranges from 10 to 300

seconds. System automatically delays specified seconds in turning off alarm and activated output after external alarm cancelled.

z Tour: Here you can enable tour function when alarm occurs. It is a one-window

tour: Please go to chapter 5.3.9 Display for tour interval setup.

z Snapshot: System can snapshoot when alarm occurs.

Please highlight icon to select the corresponding function. After completed all the setups please click save button, system goes back to the previous menu.

Figure 4-21

Figure 4-22

Figure 4-23

Figure 4-24

4.7 Backup

Click backup icon in the main menu, there are two function items: detect device and backup files. This series DVR support can realize file backup via USB port. Usually the USB backup device format is FAT32. In one-key backup function, the file is in the first sub-area.

4.7.1 Detect Device

Here is for you to view devices information. See Figure 4-25. The backup device can be flash disk or portable device. Here you can also view device total space and free space.

Figure 4-25

4.7.1 Backup (Including one-button backup)

Select backup device and then channel, file start time and end time. Click add button, system begins search. All matched files are listed below. System automatically calculates the capacity needed and remained. See Figure 4-26. system only backup files with a √ before channel name. You can use Fn or cancel button to delete √ after file serial number. Click backup button, you can backup selected files. There is a process bar for you reference. When the system completes backup, you can see a dialogue box prompting successful backup.

Figure 4-26

Click backup button, system begins burning. At the same time, the backup button becomes stop button. You can view the remaining time and process bar at the left bottom. See Figure 4-27.

+ 69 hidden pages

IC Realtime Mobile DVR User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual