ICOM RS-R30A Basic Manual [es,fr]

Page 1

REMOTE CONTROL SOFTWARE

RS-R30A

The RS-R30A is an Android™ application to control the IC-R30 from your Android device. These instructions show how to use the application. Refer to the IC-R30 BASIC MANUAL for the Bluetooth connection details.

Major functions

Single band display Dual band display VFO Mode Setting a frequency

Selecting a receive mode

Duplex setting Tone Setting NB, ANL, AFC, VSC

settings TS setting

Memory Mode Display a memory

channel Write a memory

channel

Scan Start/Stop scan

SKIP settings Adjust VOL/SQL Recording ATT settings RF gain settings

N/A: Not Applicable

✓

N/A

✓

Operating notes

• ConrmtheIC-R30ʼsSerialportfunctionissetto “CI-V (Echo Back OFF)”

( [MENU] > Bluetooth Set > Data Device Set >

Serialport Function)

• PairtheIC-R30fromtheAndroidʼsBluetooth Connection menu. Refer to the IC-R30 ADVANCED MANUAL for details.

• There may be a time delay between the receiver’s operation and the display on the data device.

The time delay may occur while scanning, or using

a Bluetooth headset.

• Bluetooth connection may be canceled, when:

- The device’s screen is locked.

- Wi-Fi is turned ON on your Android device.

- The application is in the Background mode.

- The surrounding radio wave environment affects the connection.

- Connecting or disconnecting a Bluetooth headset.

• The application does not output the audio received by the receiver.

• Restart the application after you have edited the Memory channel on the IC-R30.

• The application supports only portrait orientation. It does not support Auto Rotate.

INSTRUCTIONS

System requirements

The following system is required to use the application. (As of October 2018)

Data device

Android™ version 5.0 or later*

*Tested with the Android 5.x, 6.x, 7.x, 8.0, and 8.1.

L Download the application from the Google Play.

Receiver

IC-R30  Disclaimer

• The application may not work, depending on the OS version, installed applications, or other reasons.

• These Instructions are based on using Android

7.0. Depending on the OS version or settings, the indications or items may differ.

• The screen shots on these Instructions are just examples, so the contents may differ from the actual ones.

- 1 -

Page 2

Function display

Menu Icon

Touch to display the menus, as shown below.

“Control”

Displays the frequency or memory channel that the IC-R30 is receiving. You can change the receive mode, or start/stop scanning.

“Receiver Settings”

Displays functions usable in the current receiving mode. Refer to the IC-R30 ADVANCED MANUAL for each function details.

“Application Settings”

Edit the application settings such as the Bluetooth connection, CI-V address, and so on.

“Bluetooth Connection”

Connect or disconnect Bluetooth.

“Exit the Application”

Touch to exit the application.

Volume/Squelch icon

“VOL/SQL”

z Select whether or not to synchronize the A band

and B band audio level.

z Adjust the volume and squelch.

Touch the sub band area to set it as the main band.

Group*/Channel Selector buttons

* Usable for only the Memory

mode

Touch buttons

Touch to use assigned functions, or edit the receiver settings, as shown below.

L The grayed out buttons are not usable.

[MAIN]/[DUAL]

z Touch to set the A or B band as the main band. z Long touch to turn the Dualwatch function ON or

OFF.

[MODE]

Touch to display the Receive mode options.

[VFO]/[MR]

Touch to select the VFO mode or Memory mode.

[RFG]

Touch to display the RF Gain options.

[ATT]

Touch to display the Attenuator options.

[TS]

Touch to display the Tuning Step options.

[●REC]

Touch to start or stop voice recording.

[SCAN]

Touch to start or stop scanning.

L TouchtheChannelSelectorbuttons(▲/▼)tochange

the scanning direction.

[SKIP]

z Touch to display the Skip/Program Skip options in

the Memory mode.

z While scanning, touch to set the frequency or

Memory channel as a Skip Frequency or Channel.

- 2 -

Page 3

Basic operations

D Setting the frequency in the VFO mode

Use the Channel Selector buttons, or set the frequency as shown below.

1. Touch the displayed frequency.

• The Frequency Entry screen is displayed.

Touch “ ” to clear the frequency all at once.

D Selecting a memory channel

in the Memory mode.

Use the Group/Channel Selector buttons, or select a channel as shown below.

1. Touch the displayed channel.

• The Group/Channel Selection screen is displayed. L The channel name is displayed, if it is entered.

Touch after entering.

2. Set the frequency using the software keyboard, and then touch “Done.”

NOTE:

Some third party keyboard applications may not be usable for setting the frequency.

Group

Channel

2. Select a group and channel, and then touch “Close.”

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries. Android and Google Play are registered trademarks or trademarks of Google Inc, and Google is registered trademark or trademark of Google, Inc. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Icom Inc. is under license. Other trademarks and trade names are those of their respective owners. All other products or brands are registered trademarks or trademarks of their respective holders.

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

Oct. 2018

- 3 -

A7481-2EX