ICOM RS-MGR2 INSTRUCTIONS

Page 1

FCC information

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment

oﬀ and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀ erent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Disposal

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators

(rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

About CE

Versions of this model which have the “CE” symbol on the product, comply with the essential requirements of the

2014/30/EU directive for Electromagnetic Compatibility and the 2001/95/EC directive for General Product Safety.

INSTALLATION GUIDE

dPMR SYSTEM MANAGER

RS-MGR2

• See the instruction manuals of the PC or external device for their operation details.

• The displayed screens, dialogs, indications may diﬀ er slightly, depending on your system settings, type of OS and its service

pack level.

• To operate the software, refer to the RS-MGR2 Instruction manual.

• To read the instruction manual, Adobe Acrobat Reader is required. If you have not installed Reader, download it from Adobe Systems Incorporated’s web site.

About the Instruction manual (PDF)

When you start the software, select “Help” on the main menu screen, and then select “Manual” to display the RS-MGR2 instruction manual for assistance with the functions or settings.

Thank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely before using this product.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries. Microsoft and Windows are trademarks of the Microsoft group of companies. Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders.

The following system is required to use the RS-MGR2.

D PC

• CPU: Intel Core2 Duo Processor

E6600/2.40GHz, equivalent or faster

• System memory: 2 GB or more

• Monitor: 1280 x 1024 or better resolution

• Sound card: For sounding alarms

• Speaker: For sounding alarms

• LAN: 100 Mbps or faster

(Fixed IP address necessary)

NOTE: DO NOT install more than 2 LAN cards into the PC.

D Operating System (OS)

• Microsoft Windows Server 2012 R2

• Microsoft Windows Server 2012

• Microsoft Windows 10

• Microsoft Windows 8.1 (Except for Windows RT)

 RS-MGR2 can be used with both 32 and 64 bit versions of the

operating systems listed above.

Browser:

• Internet Explorer 11.x* *Any number

Other:

• USB port A USB 1.1 or 2.0 port

• Hard disk: At least 500 GB of free space.

CS-FC5000:

• You need another PC that has the CS-FC5000 (later than version 2.20) installed.

• The PC with the CS-FC5000 and the PC with the RS-MGR2 need to be connected through the network.

Apache is automatically added to the ﬁ rewall’s exception

programs, when the RS-MGR2 is installed to your PC.

NOTE: The RS-MGR2 communication ports are UDP 161, UDP 514, and TCP 1468 as defaults.

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan Feb. 2022

- 4 -

- 1 -

A7376W-1EX-1 Printed in Japan

Page 2

• The included USB ﬂ ash drive does not have the Write Protection, so formatting it will erase all data. Also, USB ﬂ ash drives have a certain lifetime and you may not be able to read or write data after a long period of use. We recommend making a

backup ﬁ le of the data on the USB ﬂ ash drive onto another device.

• Icom is not responsible for any lost proﬁ ts, or data, or consequential, special, indirect, or incidental damages.

When installing the software, conﬁ rm Windows has completed its startup, and then sign in as the administrator.

These instructions are based on using Microsoft Windows 10.

1. Confirm no other applications are running.

2. Insert the USB flash drive into the PC.

3. Double-click “setup_x64.exe” or “setup_x86.exe”

7. “Destination Folder” is displayed. Click <Next >>.

• If desired, click <Change...> to select another destination folder before clicking <Next >>.

in the USB flash drive.

• setup_x64.exe: Installer for the 64 bit version OS.

• setup_x86.exe: Installer for the 32 bit version OS.

If “User Account Control” is displayed, click <Yes>.

4. “Welcome to the InstallShield Wizard for RS-MGR2” is displayed. Click <Next>>.

Conﬁ rm

5. “License Agreement” is displayed. After reading the privacy policy, select “I accept the terms in the license agreement” and click <Next >>.

Before using the RS-MGR2, follow the instructions below to enable the Syslog function for the CS-FC5000.

NOTE: The CS-FC5000’s ﬁ rmware must be later than revision 2.20.

See the CS-FC5000’s Conﬁ guration Manual for details on updating the ﬁ rmware.

1. Open the Configuration > Region screen, and then click [Monitoring].

Click

2. Enter the “Syslog Severity IP Address” of the PC that has the RS-MGR2 installed.

3. Select “UDP” for the “Syslog Protocol” setting.

4. Select “v2c” for the SNMP Mode setting.

5. Click [Apply] to save the settings.

6. Click [Configuration Update] to update the configured settings on the RS-MGR2.

NOTE: Be sure that the PC with the CS-FC5000 and the PC with the RS-MGR2 are connected through the network.

Enter

Select

Click

6. “Port Setting” is displayed. Confirm the Apache port number, and then click <Next>>.

• If desired, enter a diﬀ erent Apache port number before clicking <Next >>.

Click

8. “Ready to Install the Program” is displayed. Click <Install> to start installing.

9. After the installation has completed, “InstallShield Wizard Completed” is displayed. Click <Finish>.

NOTE: You can uninstall the software using the “Apps & features” in the “Settings” menu. To get started, click on Start > Settings > Apps > Apps & features.

NOTE: Be sure that you sign in as the administrator.

1. Start Internet Explorer.

2. Enter the URL and go to the page.

URL: https://(Static IP address of the PC that has

the RS-MGR2 installed, and the apache port number)/

Example: https://xxx.xxx.xxx.xxx:53959/

• Apache port number is set to 53959 as default.

• “There’s a problem with this website’s security

certiﬁ cate” is displayed.

3. Click “Continue to this website (not recommended).”

4. The Log-in screen is displayed. Enter the user name and password, and then click

on [Login] to start the RS-MGR2.

User name: admin Password: admin (default)

Enter

Click

NOTE: Change the password on the Client Management screen.

TIP: You can operate the RS-MGR2 using

Internet Explorer on another PC that is on the same network.

- 2 - - 3 -