ICOM RS-AERO1I INSTRUCTIONS

Download

Page 1

INSTRUCTIONS

iOS™ APPLICATION

RS-AERO1I

Thank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely

before using this product. With the RS-AERO1I, you can edit waypoints and

ight plans used with the IC-A25N or IC-A25NE.

System requirements

The following system is required to use the

application. (As of April 2023)

Data device

• iOS version 13 or later

L Download the application from the App Store.

Transceiver

• IC-A25N or IC-A25NE

 Disclaimer

• The application may not work, depending on the OS version, installed application, and so on.

• These Instructions are based on using iPad. Depending on the OS version or setting, the indications or items may differ.

• The screen shots on these Instructions are just examples, so the contents may differ from the actual ones.

Operating notes

• Bluetooth LE is used to connect with the transceiver, so there may be a time delay between the transceiver’s operation and the display on the data device.

• You may need to connect to the Internet through a

Wireless LAN, a mobile network for some functions.

• Do not read or write data to/from the transceiver while receiving or transmitting audio. The transceiver cannot receive or transmit audio while reading or writing data to/from a data device.

Startup action

D Read waypoint/Flight plan from radio

Tap to read waypoints and ight plans from the

IC-A25N or IC-A25NE.

D Read waypoint/Flight plan from les

Tap to read saved waypoints and ight plans.

D Create a new waypoint

See page 3 for details.

D Bluetooth connection

Tap to open the “Bluetooth devices” screen, to

connect the IC-A25N or IC-A25NE.

 Connecting the IC-A25N/IC-A25NE

1. Preparation

z Select the “LE Device” item on the IC-A25N or

IC-A25NE.

([MENU] > Bluetooth > Pairing/Connect >

Search Device > LE Device)

2. Connecting

1. Tap “Bluetooth connection.”

• The “Bluetooth devices” screen is displayed.

2. Tap “Scan.”

• Scan starts and found devices are displayed.

3. Tap the IC-A25N or IC-A25NE’s name to pair.

• Returns to the “Select the Startup action” screen, if the transceiver is correctly connected.

Icom and the Icom logo are registered trademarks of Icom

Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New

Zealand, and/or other countries.

IOS is a trademark or registered trademark of Cisco in the U.S.

and other countries and is used under license.

iPad is a trademark of Apple Inc., registered in the U.S. and other

countries and regions. App Store is a service mark of Apple Inc. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Icom Inc. is under license. All other products or brands are registered trademarks or trademarks of their respective holders.

– 1 –

Page 2

Menu items

q Bluetooth Connection (p. 1)

Tap to open the “Bluetooth devices” screen, to

connect the IC-A25N or IC-A25NE.

w Display the Startup Menu (p. 1) Tap to open the “Select the Startup action” screen.

e Waypoint OFF/Waypoint ON Tap to hide or display waypoints.

r Flight Plan OFF/Flight Plan ON

Tap to hide or display  ight plans.

t Direct-To OFF/Direct-To ON Tap to hide or display Direct-To.

i Read  ight plan from the radio

Tap to read waypoints and  ight plans from the

IC-A25N or IC-A25NE.

o Load Data

Tap to load the saved waypoints or  ight plans.

!0 Save Data

Tap to save the waypoints or  ight plans.

!1 Load settings Tap to load the saved waypoint’s icon data.

!2 Save settings (p. 3) Tap to save the waypoint’s icon data.

y Import Data (p. 3)

Tap to open the “Select the  le type” screen to

import fpl or gpx format data.

u Write  ight plan to the radio

Tap to write waypoints and  ight plans to the

IC-A25N or IC-A25NE.

!3 Legal notices Tap to open the “Legal notices” screen.

!4 Security Policy

Tap to open the security policy (Japanese).

– 2 –

Page 3

Operation

D Importing fpl/gpx format data

You can import fpl or gpx format data from your PC

using the File Sharing function of iTunes.

L See the Apple Inc.’s website about installation and

system requirements.

L See the iTunes Help le about the File Sharing function

and device synchronization.

D Editing/Adding a waypoint

1. Confirm “Waypoint” is selected at the top of the screen.

2. Tap the waypoint to edit.

• A popup is displayed.

TIP: Long tap on the map to add a new waypoint.

• A popup is displayed. L Drag and drop the marker to the desired position.

4. Edit the waypoint.

L Tap to edit the items shown below.

L Items other than shown below are not editable.

Item Description

Waypoint name Enter the waypoint name.

GroupNo

( For only when

adding a

waypoint)

Select the group. The waypoint will be saved to

the IC-A25N or IC-A25NE’s

selected group.

Type • Select the type that indicates

the type of equipment.

• Tap on the icon to select the waypoint’s icon.

Magnetic

Select the magnetic variation.

Variation

3. Tap the popup.

• The “Edit waypoint” screen is displayed.

5. After editing, tap “Set” to save the waypoint.

D About the waypoint icon

You can save the waypoint’s icon data.

1. Tap the Menu icon.

Tap

2. Tap “Save settings.”

3. Enter the file name, and then tap “Set.”

– 3 –

Page 4

Operation (Continued)

D Editing/Adding a ight plan

1. Tap “FlightPlan” at the top of the screen.

• The “Select a ight plan” screen is displayed.

2. Tap a flight plan.

• The “Edit ight plan” screen is displayed. L To add a ight plan, tap “(+) NEW.”

3. Edit the flight plan’s name if necessary, and then tap “Set.”

4. Edit the flight plan by adding or deleting waypoints.

L Tap “Cancel” at the right of the screen to cancel

editing.*

*The conrmation dialog is displayed.

TIP:

To add a waypoint to the ight plan:

1. Tap a waypoint.

• A popup is displayed.

2. Tap the popup.

To delete a ight plan’s waypoint:

1. Tap a waypoint.

• A popup is displayed.

2. Tap the popup.

• The “Select the action” screen is displayed.

3. Tap “Delete.”

D Deleting a ight plan

1. Tap “FlightPlan” at the top of the screen.

• The “Select a ight plan” screen is displayed.

2. Swipe the flight plan to delete.

3. Tap “Delete” to delete the flight plan.*

*A conrmation dialog is displayed.

• Returns to the “Select a ight plan” screen.

4. Tap “Cancel” to return to the Main screen.

D Setting a Direct-To

You can set a direct destination on the map, and

immediately write it to the IC-A25N or IC-A25NE.

L Conrm the IC-A25N or IC-A25NE is connected to the

iOS device.

1. Tap “Direct-To” at the top of the screen.

2. Long tap on the map.

• A popup is displayed. L Drag and drop the marker to the desired position.

TIP:

You can also set a waypoint as a Direct-To by tapping it.

• A popup is displayed.

To insert a waypoint before a selected waypoint:

Example: Inserting the waypoint X before the waypoint Y.

1. Tap waypoint Y.

• A popup is displayed.

2. Tap the popup.

• The “Select the action” screen is displayed.

3. Tap “Insert above.”

4. Tap waypoint X.

• A popup is displayed.

5. Tap the popup to insert waypoint X.

5. After editing, tap “OK” on the left of the screen.

• The “Flight plan entry” screen is displayed.

6. Tap “Course To,” and then select the course.

L The course is automatically calculated by the

transceiver, if it is not selected.

3. Tap the popup.

• The “Setting Direct-To” screen is displayed.

4. Tap “Magnetic Variation,” and then select the magnetic variation.

5. Tap “Course To,” and then select the course.

6. Tap “Set” to set the Direct-To.*

*The conrmation dialog is displayed.

• The transceiver starts to navigate to the destination.

7. Tap “Set” to save the flight plan.*

*The conrmation dialog is displayed.

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

Apr. 2023

– 4 –

A7423-1EX-2