Icom OPC-1862, OPC-478UC, OPC-2363, OPC-1122U, OPC-2357 User Manual

0 (0)
Icom OPC-1862, OPC-478UC, OPC-2363, OPC-1122U, OPC-2357 User Manual

INSTRUCTIONS

CLONING CABLES

opc-478uc opc-966u opc-1122u opc-1862 opc-2338 opc-2344 opc-2363

DATA CABLE opc-2357

IMPORTANT

READ ALL INSTRUCTIONS carefully and thoroughly before using the cable.

SAVE THESE INSTRUCTIONS! — These instructions contain important safety and operating details for the cable.

EXPLICIT DEFINITIONS

WORD

DEFINITION

CAUTION

Equipment damage may occur.

 

If disregarded, inconvenience only.

NOTE

No risk of personal injury, fire or

 

electric shock.

 

 

SUPPLIED ITEMS

*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPC-478UC

OPC-966U

 

 

 

 

 

 

 

 

 

OPC-1122U

 

 

 

 

 

 

 

 

 

 

 

 

OPC-2344

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPC-1862 OPC-2357 OPC-2363

OPC-2338

* One of them is supplied.

Ferrite EMI filter

CD

OPC-1637

IMPORTANT: Some Icom cloning software can only select ports 1 to 4. When several external devices, such as a printer, scanner, or hard-disk drive are connected to the USB port, the port number available for the cloning software may be port 5 or higher. Therefore, you must first change the external device to a port number other than 1 to 4.

Thank you for choosing this Icom product.

The cloning cable is designed to connect an Icom transceiver or receiver and a PC for data cloning using an Icom cloning software.

The data cable is designed to connect an Icom transceiver (Rekeying Management transceiver) and a PC for doing the OTAR (Over-The-Air-Rekey- ing) operation.

Please read these instructions thoroughly before using the cable.

PRECAUTIONS

CAUTION: USE ONLY INDOORS! NEVER expose the cables to rain, snow or any liquids.

NEVER let metal, wire, or other objects touch any internal part of the connectors.

CAUTION: NEVER use a USB cable other than the OPC-1637. DO NOT extend the USB cable. When the cable longer than 1.5 m (4.9 ft) is used, a data error may occur.

DO NOT use harsh solvents such as benzine or alcohol when cleaning, as they will damage the cables.

Ensure that your PC supports USB port operation by confirming the Universal Serial Bus controller is in the PC’s Device Manager.

Connect the cable to the PC’s USB port directly, or to a self-powered USB hub.

Approximately 20 mA of current is required. Insufficient current capacity of the USB port can cause unstable cloning operation and a data error.

CAUTION:

You MUST install the USB driver BEFORE you

connect the cable to the PC. Otherwise you will

have to:

qdisconnect the cable

winstall the driver

ereconnect the cable

D Cloning software compatibility

The connector of OPC-478UC, OPC-966U, and OPC1122U USB type cloning cables are basically the same as the same numbered RS-232C type cables.

Therefore, you can use the USB type cables with most of the Icom cloning software that require the RS-232C type cables.

SPECIFICATIONS

• Usable temperature range:

 

OPC-2338/OPC-2344

0˚C to +60˚C

 

(+32˚F to +140˚F)

Others

–10˚C to +60˚C

 

(+14˚F to +140˚F)

• Cable length (approximately):

 

OPC-478UC

520 mm (20.5 inches)

OPC-2363

300 mm (11.8 inches)

Others

250 mm (9.8 inches)

OPC-1637 (USB cable)

1500 mm (4.9 feet)

• Weight (approximately):

 

OPC-478UC

40 g (1.4 oz)

OPC-966U

54 g (1.9 oz)

OPC-1122U/OPC-2344

34 g (1.2 oz)

OPC-1862/OPC-2338

57 g (2.0 oz)

OPC-2357

66 g (2.3 oz)

OPC-2363

37 g (1.3 oz)

OPC-1637 (USB cable)

49 g (1.7 oz)

DISPOSAL

The crossed-out wheeled-bin symbol

on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, bat-

teries, and accumulators (rechargeable batteries) must be taken to designated

collection locations at the end of their working life.

Do not dispose of these products as unsorted municipal waste.

Dispose of them according to the laws in your area.

SYSTEM REQUIREMENTS

• Operating System (OS)

 

Microsoft® Windows® 10

32 bit/64 bit

Microsoft® Windows® 8.1*

32 bit/64 bit

Microsoft® Windows® 7

32 bit/64 bit

* Except for Microsoft® Windows® RT.

• Others

A USB 1.1 or 2.0 port

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.

Adobe and Reader are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders.

Loading...
+ 1 hidden pages