Icom IC-F5400D, IC-F6400D Product Manual
Version 1.0
December 2016
NXDN™
IC-F5400D/IC-F6400D SERIES
PRODUCT GUIDE
PGX-IC-F5400D/F6400D-V1.0
NXDN™ IC-F5400D/IC-F6400D SERIES PRODUCT GUIDE
PREFACE
This product guide is made to promote our new products, the IC-F5400D/IC-F6400D transceivers. The new
product's technology components are described in this document, and you will understand the target users,
built-in functions, and sales points of these transceivers. This product guide's target users are dealer sales
staff members who are going to sell these transceivers for the first time.
Icom hopes this product guide will help you to promote sales of the IC-F5400D/IC-F6400D series
transceivers.
Trademarks
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the
United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other
countries.
COMMANDMIC is a trademark of Icom Incorporated.
NXDN is a trademark of Icom Incorporated and JVC Kenwood Corporation.
The Bluetooth
such marks by Icom Inc. is under license.
LTR is a trademark of the E.F. Johnson Technologies, INC.
3M, Peltor, and WS are trademarks of 3M Company.
All other trademarks are the properties of their respective holders.
© 2016 Icom Inc.
®
word mark and logos are registered trademark owned by Bluetooth SIG, Inc. and any use of
2
TABLE OF CONTENTS
NXDN™ IC-F5400D/IC-F6400D SERIES PRODUCT GUIDE
SECTION 1
SECTION 2 PRODUCT RANGE ............................................................................................................. 11
SECTION 3 COMPARISON WITH EXISTING MODELS ....................................................................... 12
SECTION 4 NEW FUNCTION INTRODUCTION .................................................................................... 16
SECTION 5 ACCESSORIES ................................................................................................................... 22
APPENDIX REQUIRED EQUIPMENT FOR SYSTEM CONSTRUCTION ............................................. 25
PRODUCT OUTLINES .......................................................................................................... 4
1-1 ABOUT THE PRODUCT OUTLINES, SALES POINTS, AND TARGET USERS ........ 4
1-2 IC-F5400D/IC-F6400D’S SPECIFICATIONS ............................................................... 9
3-1 FUNCTION COMPARISON BETWEEN THE IC-F5400D/IC-F6400D AND
EXISTING MODELS .................................................................................................. 12
3-2 FUNCTION COMPARISON BETWEEN THE IC-F5400D/IC-F6400D AND
IC-F5060D/IC-F6060D ............................................................................................... 13
3-3 SPECIFICATION COMPARISON BETWEEN IC-F5400D AND IC-F5060D ............. 14
3-4 SPECIFICATION COMPARISON BETWEEN IC-F6400D AND IC-F6060D ............. 15
3
NXDN™ IC-F5400D/IC-F6400D SERIES PRODUCT GUIDE
SECTION 1 PRODUCT OUTLINES
1-1 ABOUT THE PRODUCT OUTLINES, SALES POINTS, AND TARGET USERS
About the IC-F5400D/IC-F6400D series transceivers
The IC-F5400D/IC-F6400D series transceivers have a drastically changed appearance from traditional Icom
land mobile transceivers, and operability that adapts a diversified operating style. In addition, the
transceivers are compatible with NXDN™ Single-site trunking and Multi-site trunking systems by utilizing an
activation license.
Sales point
• Model line-up suitable for various operating purposes.
IC-F5400D/IC-F6400D IC-F5400DS/IC-F6400DS
Equipped with a color LCD Equipped with a 7 segment display
• Equipped with larger-sized keys
Enlarged function keys are built-in to the IC-F5400D/IC-F6400D compared to the IC-F5060D/IC-F6060D
series transceivers. In addition, the built-in [UP]/[DOWN]/[LEFT]/[RIGHT] keys improves operability, and
menu selection.
• Equipped with a color LCD
The IC-F5400D/IC-F6400D series transceivers have a color LCD. The size of the LCD is larger than the
IC-F5060D/IC-F6060D series transceivers, so the visibility is also drastically improved.
Front view and size comparison
174
160
55
45
IC-F5400D/IC-F6400D
IC-F5060D/IC-F6060D
• Improved waterproof/dustproof
The waterproof/dustproof grade is improved from IP54 (controller only) to IP55 (both controller and main
unit), compared to the IC-F5060D/IC-F6060D series transceivers.
4
NXDN™ IC-F5400D/IC-F6400D SERIES PRODUCT GUIDE
• Improved optional unit attachment
The controller can be detached without using a screw driver. Therefore, the optional unit can easily be
attached.
To detach the controller, pull up on the
latches to unlock the controller.
Controller
Bottom view of the main unit.
5
NXDN™ IC-F5400D/IC-F6400D SERIES PRODUCT GUIDE
• A 2.37 inch large size color LCD
You can easily see a lot of information on the 320 × 150 dot color LCD display.
You can set the menu items to be visible or invisible in the programming software.
Menu screen
Message screen
Execution confirmation
screen
Night mode screen
• Local language support
Menu item names and messages can be displayed in languages other than English.
NOTE: Names and messages in languages can be preprogrammed using the programming software.
If the main unit firmware revision is 1.6 or later, English, German, French, Spanish, Russian, and Chinese
are supported.
English
French
German
• A user interface improves the operability compared with previous Icom land mobile transceivers.
You can reach desired operations and/or settings by only selecting the icon, or from a list on the menu
screen.
USB mode selecting example
TX noise canceling setting example
Target ID selecting example
6
NXDN™ IC-F5400D/IC-F6400D SERIES PRODUCT GUIDE
• Various operation styles (Available only for IC-F5400D/IC-F6400D)
IC-F5400D/IC-F6400D transceiver can be operated in the following operation styles. Each operation style
requires main unit firmware revision 1.6 or later.
Detached controller style
You can install the controller close to the operator. Therefore, you can efficiently use the limited space in
a vehicle or the top of a desk.
Dual head controller style
You can attach two controllers, one near the driver seat and one near the operation panel of a fire engine.
Therefore, you can operate the transceiver from either location.
COMMANDMIC™ and detached controller style
You can operate the transceiver from the driver seat in a mobile crane using the controller, or at the crane
controls using the COMMANDMIC™.
7
Target users
NXDN™ IC-F5400D/IC-F6400D SERIES PRODUCT GUIDE
B & I markets
(Transport, and so on)
Headquarters of security services
Public works (Electric power
industry, Water services,
and so on)
Construction sites
Public safety
Taxi companies
Transportation businesses
• Users who require the AES/DES encryption function.
• Users who require languages other than English.
8
Loading...