Icom IC-F521 User Manual [nl]

VHF AND UHF TRANSCEIVERS

(

25W VHF transceiver

)

(

25W UHF transceiver

)

(

50W VHF transceiver

)

(

45W UHF transceiver

)

VHF TRANSCEIVER

UHF TRANSCEIVER

VHF TRANSCEIVER

UHF TRANSCEIVER

50W

45W

25W

25W

THE MOBILE O
TODAY’S PROFE

The IC-F520/F620 series mobiles meet the demanding
needs of today’s professionals. With 256 channel capac­ity and built-in flexible tone signalings, cross-regional
public safety coverage is a reality. Business and indus­trial users will appreciate the flexible, yet simple design
of these MIL SPEC rugged mobiles — from conventional
to expanded trunking operation.

Full built-in tone-signalings

All tone-signalings are built-in such as
CTCSS, DTCS, 2-tone and 5-tone en­code/decode and DTMF encode. A
wide variety of selective calling sys­tems are available to call specific sta-

(s) or control a repeater. In

tion
addition, ANI

cation)

2-tone/5-tone and DTMF decoder*.

* Optional UT-108 is required.

(Automatic Number Identifi-

function is available with

Face the speaker in the
direction you need

Some people install their radios under
the dashboard. Others, on the ceiling.
Facing the speaker in the right direc­tion is important for clear audio. The
IC-F520/F620 series lets you simply
rotate the chassis to face the speaker
in the direction you need while the
control head remains right side up.

MIL standard rugged
construction

The tough aluminum die-cast chassis
and polycarbonate front panel have
been tested to the MIL standards. With
this heavy-duty construction, the IC­F520/F620 series provides reliable op­eration over the long term, even with
use in rugged vehicle environments.

256 memory channels

With 256 channels separated into 16
memory banks and identifiable by a
10-character alphanumeric LCD, you
can quickly access pre-programmed
contingency frequency plans – ideal
for regional-wide, cross-municipality
communications!

9 programmable buttons

2 pairs of up/down buttons and P0-P4
function assignable buttons allow you
to customize functions to meet spe­cific needs. The following items are
programmable in conventional mode
or SmarTrunk mode respectively.

• Channel down • Channel up

• Scan start/stop A, B • Bank

• Scan add/delete (Tag) • Priority A, B

• Priority rewrite A • Monitor

• Memory channel 1-4 • Public Address

•

High/Low output power

•

C. Tone channel enter

• Wide/narrow channel • Talk around

• DTMF autodial • Re-dial

• Emergency signal • Scrambler

• Emergency repeat • Compander

• User set mode • Call • Null

•

Trunking group switch

• Turbo SpeeDial A-D • Option out 1-3

• Option out momentary 1-3

• Special function 1-2 • Digital button

• Rx speaker

• Lock

• * • #

Trunking capability

Compatible with SmarTrunk 3G™ with
the optional UT-117/S, or the LTR
trunking system with the optional
UT-111 installed.

®

Independent AF volume knob

An independent volume knob offers
simple, convenient operation. There is
no need to take your eyes of the road
to turn up the volume.
Key backlighting is
convenient for opera­tion at night.