Vibration alert function
When a pre-programmed 2-tone/5-tone code or call
from a specific group user
(BIIS mode) or a status mes-
sage
(BIIS mode)
is received, the radio vibrates power-
fully enough to be felt through heavy clothing.
8 minute voice recorder
When a pre-programmed 2-tone/5-tone code or a call
from a specific group user
(BIIS mode) is received, the
voice recorder automatically starts recording the incoming message. You will not miss an important call
even when you are temporarily away from the radio.
You can manually start recording incoming calls and
also your own message. It records up to a maximum
of 8 minutes
(Or up to 48 calls
of 10 sec. recording time).
700mW audio output
The IC-F51V delivers a loud 700mW* audio output
with the built-in BTL amp. The built-in audio compander provides clear, low noise communications. Improved bass characteristics also betters the audio
quality.
* Typical with internal speaker.
Lone worker function for remote check in
When the radio is not operated for a preset period
(1 to
255 min.)
, the radio sounds a beep and requires you to
push the emergency button. If the emergency button
is not pushed for a preset time
(1 to 255 sec.), an emer-
gency signal automatically transmits and informs your
co-worker or dispatcher that something may have
happened to the individual worker.
IP67, dust-tight and
waterproof protection
The IC-F51V has outstanding
protection against dust and water
that is equivalent to IP67. The ICF51V can withstand submersion
in 1m depth of water for up to 30
minutes and has dust-tight construction that prevents the
ingress of dust.
Most popular signalings built-in
Use the built-in CTCSS, DTCS, 2-Tone, 5-Tone and BIIS
signaling capabilities to set up your talk group or selective
calling. The IC-F51V can decode ten 2-Tone codes or
eight 5-Tone codes on a channel. When a matched tone
is received, the following actions are programmable for
each code.
• Bell icon • Answer back call • Beep sound
• Auto transmit • Radio Stun/Kill/Revive
• Voice recorder • Vibration alert
“ ” icon on the display shows you have a new message.