Page 1
PC
Cable (Purchase separately)
1. Confirm no other applications are running.
6. “Choose Destination Location” is displayed.
System requirements
A PC with an OS and specifications, and the cable, listed below are required to use the CS-V3MR.
●
Microsoft® Windows® 10 (32/64 bit)
●
Microsoft® Windows® 8.1 (32/64 bit)*
*Except for the “RT” version.A USB 1.1 or 2.0 port
Software installation
When installing the software, confirm Windows has completed its startup, and then sign in as the
2. Double-click “setup.exe.”
If “User Account Control” is displayed, click <Yes> to
continue.
If a License Agreement window is displayed, read the
terms and conditions carefully. Enter a check mark and
click <Install>, if you agree.
3. “Welcome to the InstallShield Wizard for CS-V3MR”
is displayed.
Click <Next>>.
Thank you for choosing this Icom product.
INSTRUCTIONS
this product.
●
OPC-478UC PROGRAMMING CABLE
NOTE:
Confirm your OPC-478UC has the letter “B” on
its label. The cable with a label without “B” is not usable
carefully and completely before using
READ ALL
with Windows® 8.1 and 10.
administrator
.
Click <Next >>.
If desired, click <Browse...> to select another destination
folder before clicking <Next >>.
4. “User Information” is displayed.
Enter your name and your company name (option),
and then click <NEXT>>.
5. “Software License Agreement” is displayed.
Read carefully, and if you agree to the terms and
conditions, click <Yes>.
7. After the installation has completed, “InstallShield
Wizard Complete” is displayed.
Click <Finish>.
8. A ‘CS-V3MR’ group is created on the menu, and a
shortcut icon is created on the desktop.
NOTE:
You can uninstall the software using the “Apps
& features” in the “Settings” menu.
To get started, click on Start > Settings > Apps > Apps
& features.
Page 2
1. Rotate [VOL] to turn OFF the transceiver.
TIP:
Refer to the software’s Help file for assistance
[F1] key on the PC’s keyboard.
Before connecting the OPC-478UC to the PC
To use the OPC-478UC PROGRAMMING CABLE, you must first install a USB driver.
The latest USB driver and installation guide can be downloaded from the Icom website
(https://www.icomjapan.com/support/firmware_driver/).
Read the guide carefully before installing the driver.
Connecting the cable
2. Connect the cable as shown below.
3. Rotate [VOL] to turn ON the transceiver.
Reading and entering data
To prevent data loss, read all the transceiver’s data
before entering or editing parameters by using the
software, even if the transceiver is factory fresh.
Click
software, and then select “Read ← TR” to start reading.
●
While reading or writing entered data,
OFF the transceiver or the PC, and
disconnect the cable. Otherwise, the data could be
lost or corrupted.
●
Before reading or entering data, make a backup file
on your PC.
A backup file enables you to easily restore if the data
in the transceiver is accidentally deleted.
with the functions or settings.
To open the Help file, click <Help> in the top menu of
the software and select “Contents,” or simply push the
, or <Program> in the top menu of the
NEVER
NEVER
turn
Icom, Icom Inc. and Icom logo are registered
trademarks of Icom Incorporated (Japan) in Japan, the
United States, the United Kingdom, Germany, France,
Spain, Russia, Australia, New Zealand, and/or other
countries.
Microsoft and Windows are trademarks of the Microsoft
group of companies.
All other products or brands are registered trademarks
or trademarks of their respective holders.
Aug. 2021
A7650-1US
© 2021 Icom Inc.
Loading...