HYUNDAI MOBIS APB61C4IX User Manual

DIGITAL CAR AUDIO SYSTEM | User’s Manual Model: APB61C4IX
Thank you for purchasing this multimedia
system.
This user’s manual explains how to use the
HYUNDAI Motor multimedia system.
Before using the product, read the contents
of this user’s manual carefully and use this
The screens shown in this manual may
differ with the actual screens of the
product.
The design and specification of this product
may change without prior notification for
product improvement.
When transferring the vehicle to another
individual, include this user’s manual so
that the next driver can continue its use.
Precaution for safe usage
Driving while distracted can result in a loss of vehicle control, that may lead to an accident, severe personal injury, and death. The driver’s primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle systems which take the driver’s eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle.
Do not operate the
multimedia system
while
driving.
Do not disassemble, assemble, or modify the multimedia system
Do not watch the screen for prolonged periods
.
of time while driving.
Set the volume to a level which allows the driver to be aware of external conditions.
Do not operate the
multimedia system
prolonged periods of time with the vehicle ignition in ACC. Such operations may lead to battery discharge.
Be cautious not to spill water or introduce foreign objects into the device.
Do not cause severe shock to the device. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch panel.
In case of product malfunction, please contact your place of purchase or service center.
When cleaning the touch screen, make sure to turn off the device and use a dry and smooth cloth. Never use tough materials, chemical cloths, or solvents (alcohol, ammonia, benzene, thinners, etc.) as such materials may damage the device panel or cause color and quality deterioration.
for
WARNING
Driving while distracted can result in a
loss of vehicle control that may lead to
an accident, severe personal injury, and
death. The driver’s primary responsibil-
ity is in the safe and legal operation of a
vehicle, and use of any handheld devices,
other equipment, or vehicle systems
which take the driver’s eyes, attention
and focus away from the safe operation
of a vehicle or which are not permis-
sible by law should never be used during
operation of the vehicle.
The Rear Camera display is not a substitute
for proper and safe reversing procedures.
The Rear Camera display may not display
every object behind the vehicle. Always
drive safely and use caution when
reversing.
Read the following safety precautions
Before using the product, read the contents of this user manual
carefully. Please use this product safely.
The design and specifications of this product may change without prior
notification for product and service improvement. The actual features
in the vehicle may differ from the illustrations. For more accurate
information about the vehicle, please refer to the catalogue.
This Audio system contains open source software, including without
limitation, software distributed and/or modified under the GNU General
Public license, Version 2, June 1991, and the GNU lesser General
Public License, Version 2.1, February 1999.
For additional information and to obtain related materials including
without limitation, the previous referred to licenses and software,
please contact us at MOBIS_OSSrequest@mobis.co.kr
Notations used in this User Manual
WARNING
Failure to observe the instructions in this section could result in damage
to the vehicle.
CAUTION
Information on matters that could potentially lead to injury or vehicle
damage/malfunction Information that could lead to better user safety
Information
Information and tips that make using the product more convenient
NOTICE
Information on specific features that facilitate proper product use and
understanding of functions
Information on terminology used in this manual
Table of Contents
1. Basic
Warnings and Cautions .........................1-2
Key Product Features
Component Names and Functions
Head Unit ………………………… 1-5 Steering Wheel Controls ………… 1-6
Starting the System for the First
Time ........................................................... 1-8
Turning the System On/Off ……… 1-8 Battery Warning Message ……… 1-8 Restrictions on Features for
Safety Measures ………………… 1-9 Home Screen ………………………1-10 On-Screen Touch Controls ……… 1-11
...........................1-4
...... 1-5
2. Radio/Media
FM/AM/DRM .......................................... 2-2
FM/AM Mode Display Controls …2-2
USB ............................................................ 2-4
Before Playing a USB MP3 ……… 2-4 Supported USB MP3 music
specifications ……………………… 2-6 Supported Video Image
Specifications ……………………… 2-6 USB Mode Display Controls……… 2-7 USB Video ………………………… 2-10 USB Image …………………………2-12
iPod .........................................................2-14
Using iPod Devices ……………… 2-14 iPod Mode Display Controls ……… 2-18
AUX .........................................................2-21
Connecting an External Device …2-21
Bluetooth Audio ....................................2-22
Bluetooth Audio Mode Display Controls …………………… 2-22
Bluetooth Connections Settings …2-23
My Music ...............................................2-24
My Music Mode Display Controls …………………………… 2-24
3. Bluetooth
Before Using the Bluetooth® Handsfree
What is Wireless Technology? …………… 3-2
Precautions for Safe Driving …… 3-2 CAUTIONS upon Connecting
Bluetooth
Bluetooth Connection ............................ 3-4
Pairing a New Device …………… 3-4 Connecting Bluetooth Devices…… 3-4 Disconnecting Bluetooth
Devices …………………………… 3-5 Deleting Bluetooth Devices ……… 3-5
Bluetooth Phone ....................................3-6
Phone Status Icons ……………… 3-6 Dial Accept/Reject Call ………………… 3-7 Using the Menu During a Phone
Call ………………………………… 3-8 Call history ………………………… 3-9 Contacts Favorites
................................................3-2
Bluetooth®
®
Phone ………………… 3-3
………………………………… 3-7
…………………………… 3-10 …………………………… 3-11
2 I Table of Contents
4. Other Features
5. Settings
6. Appendix
Camera ...................................................... 4-2
About Rear Detection Camera …4-2
Settings ..................................................... 5-2
Sound settings
Display settings
Phone settings
Phone settings …………………… 5-4 Bluetooth connections …………… 5-5 Auto connection priority ………… 5-6 System Bluetooth info …………… 5-6
Phone projection settings .................... 5-6
Date/Time settings
Language settings
Keyboard settings
Screensaver settings
System info
System Update …………………… 5-8
........................................5-3
.......................................5-4
........................................ 5-4
................................5-7
.................................. 5-7
.................................. 5-7
............................. 5-8
.............................................. 5-8
Product Specification ............................6-2
Troubleshooting
...........................................................6-7
FAQ
About Pairing Mobile Phones …… 6-7 About Making/Answering Phone
Calls ………………………………… 6-8 About
Bluetooth
Technology/Head Unit Use Environment ……………………… 6-8
...................................... 6-4
®
Wireless
00
Table of Contents I 3
®
iPod
iPod® is a registered trademark of Apple Inc.
Bluetooth®
The
Bluetooth
by Bluetooth SIG, Inc. and any use of such marks by Hyundai is under
license. Other trademarks and trade names are those of their respective
owners.
Wireless Technology
®
word mark and logos are registered trademarks owned
DivX
This DivX Certified® device can play DivX® HD video files (including .avi,
.divx).
Download free software at www.divx.com to create, play and stream digital
videos.
This DivX Certified® device can play DivX® HD video (including .avi, .divx).
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC
and are used under license.
Covered by one or more of the following U.S. patents: 8,731,369;
RE45,052.
DivX Certified® devices
DivX® HD Certified devices have been tested for high-quality DivX HD
video playback (including .avi, .divx). When you see the DivX logo, you
know you have the freedom to play your favorite videos.
part.1
Component Names and Functions
Starting the System for the First Time
Basic
Warnings and Cautions
Key Product Features
Basic
Safety Warnings
• Do not stare at the screen while driv­ing. Staring at the screen for prolonged periods of time could lead to traffic acci­dents.
• Do not disassemble, assemble, or mod­ify the Multimedia system. Such acts could result in accidents, fire, or electric shock.
• Heed caution not to spill water or intro­duce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.
• If you use phone related functions while driving, you will find it difficult to concen­trate on operating the vehicle and the current traffic conditions, so the possibil­ity of an accident may increase. Please use phone related functions only when parked.
• Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product mal­function. Continued use in such con­ditions could lead to accidents (fires, electric shock) or product malfunctions.
• Do not touch the antenna during thun­der or lightening as such acts may lead to lightning induced electric shock.
• Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents.
• For most Audio and multimedia modes, the display will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen. (The screen will only operate when the parking brake is ON for man­ual transmission vehicles and when the parking brake is ON or the gearshift is in the P (PARK) position for automatic.)
• Some functions other than the one mentioned above cannot be used while driving. These functions operate only when the vehicle is parked.
1-2 I Basic
Safety Cautions
Pay attention to traffic conditions while driving.
• Operating the device while driving could lead to accidents due to a lack of atten­tion to external surroundings. First park the vehicle before operating the device. In addition, the touch screen may not work for some functions when the vehi­cle is in motion. The touch screen fea­ture will be supported once the vehicle has stopped.
• Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents.
• Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impair­ment. (Adjust the volume to a suitable levels before turning off the device.)
• If you want to change the position of device installation, please inquire with your place of purchase or service main­tenance center. Technical expertise is required to install or disassemble the device.
• Turn on the car ignition before using this device. Do not operate the Multimedia system for long periods of time with the ignition turned off as such operations may lead to battery discharge.
• Upon using the Multimedia system for more than 10 minutes with the car engine turned off, the following warning will be displayed. After 10 minutes, the warning will be displayed for 5 seconds every 1 minute.
• Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen.
• When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materi­als, chemical cloths, or solvents(alcohol, benzene, thinners, etc.) as such mate­rials may damage the device panel or cause color/quality deterioration. When experiencing product concerns, inquire with your place of purchase or service maintenance center.
• Prevent caustic solutions such as per­fume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration.
01
Warnings and Cautions I 1-3
Key Product Features
This device is a Multimedia system equipped with a multifunctional player that supports Radio (FM, AM, DRM), USB, iPod, AUX, Bluetooth Audio and My Music features. The WIDE VGA LCD pro­vides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment.
Wide TFT-LCD Display
Display
Multimedia
Player
Miscellaneous
• Provides high quality video through a Wide TFT­LCD Display using an LED Back Light.
• Touch screen for maximum user convenience.
Support for various Media Formats
• Support for various media formats, including Radio, USB, iPod, AUX and Bluetooth Audio Streaming modes
My Music
• Supports copying of music stored within USB devices into My Music (internal memory) mode
Bluetooth
• Convenient use of Bluetooth® Handsfree by
Digital Screen Control Features
• Easy control of features through touch screen
Steering Wheel Control
• Control over audio features and Bluetooth®
®
Wireless Technology
using buttons within the steering wheel control
options
through the steering wheel control for maximum convenience
1-4 I Basic
Component Names and Functions
Name Description
• FM/AM/DRM mode: Changes the frequency.
TUNE
SETUP
DISP
• MEDIA (USB/iPod/My Music) mode: Changes the track, file or title (except USB Image, Bluetooth Audio, and AUX).
Moves to the Settings screen.
Turns the screen on/off.
Name Description
Selects Radio mode.
RADIO
• Each time this is pressed, the mode is changed in order of FM → AM → DRM → FM.
HOME
Displays the Home screen.
When pressed quickly (less than 0.8 seconds),
• FM/AM/DRM mode: Plays the previous/next available frequency.
• MEDIA (USB/iPod/My Music) mode: Changes the track, file or title (except for USB Image and
SEEK
TRACK
AUX).
When pressed and held down (more than 0.8 sec­onds),
• FM/AM/DRM mode: Continuously changes the frequency until the key is released.
• MEDIA (USB/iPod/My Music) mode: Rewinds or fast forwards the track or file (except for USB Image, Bluetooth Audio, and AUX).
PHONE
MEDIA
Displays the Bluetooth phone mode.
Selects MEDIA mode.
• When power is off, press to turn power on.
• When power is on, press and hold (more than
POWER/ VOL
0.8 seconds) to turn the power off.
• When power is on, press quickly (less than 0.8 seconds) to turn Audio off.
• Turn left/right to adjust the volume.
01
Component Names and Functions I 1-5
Steering Wheel Controls
Name Description
VOL+
VOL-
MUTE
Controls the volume
The sound stops playing. The song is paused with no volume output. Press again to unmute.
When pressed quickly (less than 0.8 seconds),
• When pressed in the dial screen, makes a call
• When pressed in the incoming call screen, answers the call
• When pressed during call waiting, switches to waiting call (Call Waiting)
When pressed and held (more than 0.8 seconds),
• When pressed in Bluetooth® Hands-free, redials the last dialed call
• When pressed during a Bluetooth® Hands-free call, switches call back to mobile phone (Private)
• When pressed while calling on the mobile phone, switches call back to Bluetooth ates only when Bluetooth nected)
• When pressed during a call, ends the phone call
• When pressed in the incoming call screen, rejects the call
For more details, refer to the separate Phone Projection guide.
®
Hands-free (oper-
®
Hands-free is con-
1-6 I Basic
Name Description
• Each time this is pressed, the mode is changed in order of FM → AM → DRM → USB (iPod) → AUX
Bluetooth Audio → My Music → FM
• If the media is not connected, the corresponding
MODE
modes will be disabled
• Press and hold (more than 0.8 seconds) to turn the Audio system on/off
• When power is off, press button to turn power back on
When pressed quickly (less than 0.8 seconds),
• FM/AM/DRM mode: Switches between the FM/ AM/DRM frequencies in the order as stored in the presets.
• Media (USB/iPod/My Music) mode: changes the track, file or title (except USB Image, AUX)
When pressed and held (more than 0.8 seconds),
• FM/AM/DRM mode: automatically searches broadcast frequencies
• Media (USB/iPod/My Music) mode: quickly looks up songs (except USB image, AUX and Bluetooth Audio files)
The actual feature in the vehicle may differ from the illustration.
Component Names and Functions I 1-7
01
Starting the System for the First Time
Turning the System On/Off
Press the engine start button or set the ignition key to On or ACC. Each time you turn on the system, a boot logo and safety warning will appear.
NOTICE
You cannot operate the system while it is
booting up. It may take some time for all of features of the system to be ready for use.
Pressing and holding the power key on the head unit will turn off the system. You can change Screensaver Settings in Settings to display a clock on the Screen saver.
Information
If you turn off the system during a phone call
using the Hands-free feature, then the call will automatically switch to your mobile phone.
Battery Warning Message
Always use the system while the car engine is running. If you turn on the sys­tem while the engine is off, a battery warn­ing message will appear. When the engine starts, the message will disappear.
Pressing the power key on the head unit will display the safety guide. Select the
Confirm
button to start the system. To
change the system language between
Language/
English and Hindi, select the

button.
1-8 I Basic
NOTICE
Check the volume when turning on the
system. Before turning on the system, adjust the volume to a reasonable level.
NOTICE
If you use the system for a long time with
the engine off, the battery may become completely discharged.
Restrictions on Features for Safety Measures
If you try to use features such as video mode that may distract you when you are driving, the system will turn the screen off or the function will be disabled and rele­vant warning message will appear. The audio player is not affected when video is off. The restriction screen will disappear when changing gear to P.
WARNING
- Blank Screen
Refrain from use if the screen is blank or
no sound can be heard as these signs may indicate product malfunction. Continued use in such conditions could lead to accidents (fires, electric shock).
WARNING
- T ouching the Antenna During A Thunder Storm
Do not touch the antenna during thunder or
lightning as such acts may lead to lightning induced electric shock.
01
Starting the System for the First Time I 1-9
Home Screen
Controls Menu Configuration for the Home Screen
Tap the icon on any screen to display the Home Screen below.
Information Display on the Status Bar
Displays the date and time, along with the system status shown by the various icons to the left of the clock. The icons in the following table indicate the various types of sys­tem status details and events.
Icon Description
Displayed when the audio is muted.
Displays the remaining battery of the Bluetooth phone.
Displayed when connected to Bluetooth for handsfree.
Displayed when connected to Bluetooth for streaming audio.
Displayed when connected to Bluetooth for streaming audio and handsfree.
Displayed when downloading contacts or recent calls from the Bluetooth phone.
Features Description
• Shows brief information on the radio media
AV Widget
currently playing.
• Touch the area to move to the mode for what you are listening to.
All Menus
Settings
Shows all of the items in the system menu.
Moves to the Settings screen.
• You can add up to eight menus here.
My Menu
• Add your favorite menus to have quick and easy access to them.
1-10 I Basic
Displayed while on a call with the Bluetooth phone.
Displayed when the microphone of Car is muted.
Displays the signal strength of the Bluetooth phone.
Adding Your Favorite Menu Items to My Menu
From the Home screen, select icon, and then
Edit
.
From the Edit My Menu screen, select menu items from the list on the right, then drag and drop them to a desired place on the left. To remove the item from My Menu, drag item from the left and drop them on the right.
Information
Up to eight items can be added to My Menu.
My Menu
On-Screen Touch Controls
Learn how to touch the screen to operate the system.
Select
Tap lightly on a menu or an item to select it.
NOTICE
The system will not recognize your touch if
you wear a glove or other non-conductive material. Touch the screen using your finger, an electrostatic touch-screen glove, or a stylus pen.
Drag & Drop
Select a menu or item you want, then drag and drop it to where you want to place it.
Drag or touch the slider along the play bar in the music screens to jump to the point that you want to play from.
01
Starting the System for the First Time I 1-11
Flick (Quick Scrolling)
Drag the frequency bar to the left or right to move to the frequency that you want.
From the Edit My Menu screen, drag and drop icons to add, delete, or move to/from My Menu.
1-12 I Basic
Quickly moves up and down in the list.
NOTICE
Moving the list when there are many items will
display a handler on the right of the display. You can easily move many items at a time with the handler.
You can view the previous or next image by flicking left/right on an image on the USB Image screen.
Flick left/right on the frequency bar in the radio player to look up the previous/next frequency available.
Press and Hold
Pressing the and buttons
in the music player will fast forward/rewind the music.
01
Starting the System for the First Time I 1-13
MEMO
part.2
Radio/Media
FM/AM/DRM
USB
iPod
AUX
Bluetooth Audio
My Music
Radio/Media
FM/AM/DRM
You can access the radio player either by pressing the
key or by selecting the Radio menu from All Menus on the Home screen.
FM/AM Mode Display Controls
Information
If you press the
and a radio broadcast will be tuned from the current mode.
If you are in radio mode, select the media widget from the Home screen
to access the radio player.
RADIO
key when power is off, the power will turn on
RADIO
Features Description
• The stored preset frequencies are displayed
Preset
Frequencies
Frequency Bar
Frequency
Presets
Menu
for user selection.
• After selecting frequency, press and hold the preset button for more than 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button.
• Flick the preset frequencies up/down to scroll quickly through presets.
• Flick the frequency bar left/right to search for available radio channels to the left or right of the current channel.
• Dragging: Drag the frequency bar to the left/ right to find the radio channel that you want.
Displays the current frequency.
Shows the stored presets for user selection.
• List (for FM/AM Band): A list of all available stations wil be displayed. Refresh option on top right updates the list of available stations.
• Weather/News Report (for DRM band): DRM Weather/News Announcement Feature On/ Off.
• Sound settings: Moves to the Sound settings.
2-2 I Radio/Media
Features Description
Scan/Seek
Band
Info
Displays the function being operated during Scan and Seek.
Changes to the desired band from among FM, AM and DRM.
Turns the Radio text information transmitted from the broadcasting station on and off.
Shortly plays the broadcasts for the frequencies
Scan
with superior reception for 5~10 seconds per item. (FM/AM: 5 sec., DRM: 10 sec.)
Station Name
Program type
Services
Displays the current DRM Station name.
Displays the current DRM Program type.
Switches between the DRM services available.
• Displays the number of services available with that particular frequency.
Services Index
• Highlights the currently receiving service.
• Number of services depends on the broad­casting station and it may vary between 1~4.
Turn the
TUNE
knob to manually seek avail-
able frequencies.
TUNE
• FM: Increment/decrement by 100 kHz
• AM: Increment/decrement by 9 kHz
• DRM: Previous/Next frequency
• When pressed quickly (less than 0.8 seconds): Seeks the previous/next available frequency.
• When pressed and held (more than 0.8
SEEK/TRACK
seconds): Moves quickly through all of the frequencies. The moment that you release the button, the system seeks the next available frequency.
02
FM/AM/DRM I 2-3
USB
Before Playing a USB MP3
Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on.
Files that are not standard format music/image files will not be played.
For MP3/WMA/OGG files, only music files with compression rates between 8Kbps ~ 320Kbps can be played.
Heed caution to static electricity when connecting/disconnecting external USB devices.
Encoded MP3 Players will not be recognized when connected as an external device.
When connecting an external USB device, the device may not properly recognize the USB is in some states.
Only products formatted with byte/sectors under 64Kbyte will be recognized.
USB devices, formatted to the FAT12, FAT16 or FAT32 file sys­tem are recommended. File systems other than FAT12, FAT16, FAT32, ExFat, and NTFS are not supported.
•Some USB devices may not be supported due to compatibility issues.
•Take caution so that the USB connector does not come in con­tact with body parts or objects.
•Repeated connecting/disconnecting of USB devices within short periods of time may result in product malfunction.
•Make sure to connect/disconnect external USB devices with the audio power turned off.
The amount of time required to recognize the external USB device may differ depending on the type, size, or file formats stored on the USB.
The use of USB devices for purposes other than playing music, Video and image files is prohibited.
Do not use the USB I/F to charge batteries or USB accessories that generate heat. Such acts may lead to worsened perfor­mance or damage to the device.
The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. Connect the USB directly with the multimedia terminal of the vehicle.
When using mass storage USB devices with separate logical drives, only files saved to the root drive can be played.
2-4 I Radio/Media
•When application programs are installed to specific USBs, files may not properly play.
•The device may not operate normally if MP3 Players, cellu­lar phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected with the device.
•Charging through the USB may not work for some mobile devices.
The device may not support normal operation when using a USB memory type besides Metal Cover Type USB Memory.
The device may not support normal operation when using for­mats such as HDD Type, CF, or SD Memory.
When playing iPods, please use a dedicated iPod car cable.
Normal operation cannot be guaranteed when other cables are being used.
The device will not support files locked by DRM. (Digital Rights Management)
USB memory sticks used by connecting an Adaptor (SD Type or CF Type) may not be properly recognized.
Only use Plug type connector products, as shown in the figure below.
•To play USB MP3, the USB device must be connected to the USB port in the front multibox. The USB port in the center con­sole storage (if equipped) is for charging only.
02
USB I 2-5
Supported USB MP3 music specifications
Supported Video Image Specifications
Name Description
MP3 File Specification
Recommended Bit Rates and Sampling Frequency
ID3 Tag
Detailed Specifications
Specification: MPEG1 AUDIO LAYER 3
Acceptable sampling frequency: 32, 44.1, 48 (kHz)
Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps)
96, 128, 192 Kbps fixed bit rate/44.1kHz
Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3, ID3v2.4 ID3 tags
• Maximum directory layers: 20 layers
• Maximum length of folder name/file name: 255Bytes
• Supported characters for folder name/file name: Alphanumeric characters, Korean standard char­acter set 2,350 characters, Simplified Chinese 4888 characters
• Maximum number of folders which can be stored onto one USB: 2000 folders (including ROOT)
• Maximum number of files which can be stored onto one USB: 8000
• Maximum device size supported is 64 GB.
• Use USB version 2.0 devices for better compatibility.
Information
The sound quality of MP3 files that use bitrates exceeding 192
Kbps cannot be guaranteed. When using files without fixed bit
rates, some features (FF/REW features) may not properly operate.
Name Description
File format AVI, MPEG, 3GP, WMV
Image format
Extension
Supported image file size
Video codec
Video resolution 1280 x 720
Audio codec MP3, OGG, WMA
Subtitles SMI, SRT
Files not sup­ported for play­back
JPG, GIF, BMP, PNG (animated GIF, etc. are not supported)
.avi, .divx, .mpg, .mpeg, .mp4, .3gp, .3gpp, .3gpp2, .wmv, .asf
5M pixels for JPG, BMP, PNG (1M pixels maxi­mum for GIF)
DivX3/4/5/6, Xvid, MPEG1/4(excluding MPEG2), H264, WMV9
Files which do not conform to the supported specifications Modified files (files with changed formats) Converted files (e.g. an AVI file encoded in the WMV video codec) Files without indexes Other requirements are based on DivX’s certifi­cation standards (screen display specifications and playback specifications)
Information
The playback timestamp may appear incorrectly for files with variable bit
rates.
If you get errors during playback or your file format is not supported for
video playback, please convert the format of the file using up-to-date software such as Gom Encoder, Umile Encoder and Daum Pot Encoder.
2-6 I Radio/Media
USB Mode Display Controls
Features Description
Mode
File Index
Repeat/Shuffle
Play Time
Song Info
List
Back Button
Displays the current operating mode
Shows the current file/total files within the USB
From Repeat/Shuffle, displays the current oper­ating function
Displays the current play time/total play time
Displays the information of the current track
• When a track in the file tab on the list screen is selected: Displays folder, file, title, artist, album info
• When a track in the other tabs on the list screen is selected: Displays artist, title, album info
Moves to the list screen
Returns to basic screen
Features Description
If button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
Previous File
previous file
• If play time is more than 3 seconds, play the current file from the beginning
If button is pressed (more than 0.8 seconds) it rewinds the track
Play/Pause
Plays/pauses the current file
• If button is pressed (less than 0.8 seconds):
Next File
Moves to the next file
• If button is pressed (more than 0.8 seconds): It fast-forwards the track
Repeats the current file
• If user selects song in the file tab on the list screen: Select the
Repeat
between repeating one song, repeating folder,
Repeat
and turning repeat off
• If user selects song in the other tabs (Artist, Song, Album) on the list screen: Select the
Repeat
button to switch between repeating
one song and turning repeat off
Plays files in random order
• If user selects song in the file tab on the list screen: Select the
Shuffle
between Shuffle Folder, Shuffle All, and turning
Shuffle
shuffle off
• If user selects song in the other tabs (Artist, Song, Album) on the list screen: Select the
Shuffle
button to switch between Shuffle
Category and turning shuffle off
button to switch
button to switch
02
USB I 2-7
Features Description
• Save to My Music: You can save the current track to My Music. You can play saved track from My Music without USB. Access to My
Menu
Music in the Media mode.
• Sound settings: Moves to the Sound settings screen. You can change the settings of the sound.
TUNE
Turn the
knob to search a desired
track. If the desired track is displayed, select
TUNE
the
If the
knob to play the track.
TUNE
knob is not pressed within 5
TUNE
seconds of searching tracks, the track info for the current track is restored.
2-8 I Radio/Media
Features Description
Folder/
Category Name
Current Song
Back Button
Upper Folder/
Category
Menu
Search Menu
TUNE
SEEK/TRACK
Displays folder/category name in the list
Displays the current playing file name
Returns to basic screen
Moves to Upper Folder
• Show current track: When moving to a different list screen, moves to the list page where the current file is located (Becomes disabled when the current list includes the current file)
• Save to My Music: Stores the music. The stored music can be played in My Music. (This function is not provided in Playlist.)
Search tracks by the list type. Search songs according to File, Artist, Song and Album.
If access the search menu while playing a
track, it moves to the previous search mode.
Turn the previous/next list. If the desired track is displayed,
press
• If button is pressed (less than 0.8 seconds): Plays previous/next track.
• If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewind or fast-forward the track.
TUNE
knob to move the focus to the
TUNE
knob to play the track.
02
USB I 2-9
USB Video
Features Description
Mode Display
Folder/
File Name
File Index
Play Time
Displays the current playback mode.
Displays the folder in which the USB Video file is located as well as the name of the video file that is currently playing.
Displays the name and total number of current USB Video files.
Displays the current and total play time of the USB Video.
Features Description
If button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)
Previous File
Pause/Play
Next File
Repeat
Info
List
Menu
Back Button
• If play time is less than 3 seconds, moves to previous file
• If play time is more than 3 seconds, play the current file from the beginning
If button is pressed (more than 0.8 seconds) it rewinds the track
Pause/play video file
• If button is pressed (less than 0.8 seconds): Moves to the next file
• If button is pressed (more than 0.8 seconds): It fast-forwards the track
Repeats the current video file
Displays the file name, resolution and total time.
Goes to the USB Video List
You can change the settings of the sound or dis­play also change a audio track.
• Change Audio: Changes a audio track.
• Sound settings: Moves to the Sound settings screen.
• Display settings: Moves to the Display set­tings screen.
Return to Home/Previous page
2-10 I Radio/Media
Features Description
Current Video
File
Back Button
Menu
TUNE
SEEK/TRACK
The current file being played is highlighted.
Changes to play mode screen
Now playing: When moving to a different list screen, moves to the list page where the current file is located. (Becomes disabled when the cur­rent list includes the current file)
TUNE
Turn the next list and then press it after selecting a video
file in order to play it.
Tune search will end when no keys are
pressed for 5 seconds.
• If button is pressed (less than 0.8 seconds): Plays previous/next track.
• If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewind or fast-forward the track.
knob to move to the previous/
02
USB I 2-11
USB Image
Features Description
Mode
Folder/File
Name
File Index
Slideshow
Rotate
Info
Adjust Image
Size
List
Previous/
Next image
Displays the current operating mode
Displays folder name where image is located
Shows the current file/total files within the USB
Images as slideshow in 5, 10, 20, 30 second intervals
Rotate image in clockwise direction
Shows the file name, resolution and file type of current image
Enlarge/reduce (zoom-in/zoom-out) image size
Moves to the list screen
Swipe image left or right to see Previous/ Next image
2-12 I Radio/Media
Features Description
Current File
Back Button
Displays the current playing file name
Returns to basic screen
Now playing: When moving to a different list
Menu
screen, moves to the list page where the cur­rent file is located (Becomes disabled when the current list includes the current file)
Controls background mode
• Radio mode: Changes Frequency and
TUNE
Channel
• Media mode: Changes track (excluding AUX). If a desired track is displayed, press the knob to move to the track.
Controls background mode
SEEK/TRACK
• Radio mode: Changes Frequency and Channel
• Media mode: Changes Track (excluding AUX)
USB I 2-13
02
iPod
Using iPod Devices
•iPod is a registered trademark of Apple Inc.
•iPod mode will not operate if the con­nected iPod cannot be recognized due to operation of unsupported versions that do not support related protocols, iPod abnormalities, or iPod device defects. Some iPods with unsupported communication protocols may not prop­erly operate with the Multimedia system.
For fifth generation iPod Nano devices, the iPod may not be recognized when the battery level is low. Please charge the iPod for use.
Search/play orders shown within the iPod device may differ with the orders shown within the Multimedia system.
If the iPod malfunctions due to an iPod device defect, reset the iPod and try again. (To learn more, refer to your iPod manual)
•If repeatedly connect and disconnect iPod/iPhone to the Multimedia system with USB cable in a short time, it may cause abnormal operation.
•The time for recognition of iPod/iPhone may vary depending on device type, firmware version and iOS version.
•For some iPod Touch and iPhone devices, connecting Bluetooth
®
while the iPod is operating may result in discon­tinued iPod sound. When such devices with Bluetooth
®
support are connected, this problem occurs as the sound source is changed from the Dock Connector (USB connector cable) to Bluetooth.
•To prevent this symptom, Bluetooth Audio function in the Multimedia system is limited if iPod/iPhone is connected to the system through both cable and Bluetooth. To listen to the iPod sound, use either iPod menu with USB connec­tion or Bluetooth Audio with Bluetooth connection.
•To listen to the iPod sound, reconnect the USB cable or change the audio out­put settings in iPod/iPhone to Dock.
•In order to use the iPod while operating the keys, you must use a dedicated iPod cable. (the cable that is supplied when purchasing iPod/ iPhone products)
During ACC ON state, connecting the iPod through the iPod cable (The cable that is supplied when purchasing iPod/ iPhone product.) will charge the iPod through the head unit.
The use of genuine iPod cables supplied by Apple is recommended. (The use of other products may result in noise or abnormal operation.)
To play iPod music through cable con­nection, the iPod/USB cable must be connected to the USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.
2-14 I Radio/Media
•When connecting with the iPod cable, make sure to fully insert the jack to pre­vent communication interference. If the iPod is connected to the vehicle while it is playing, a high pitch tone may sound for about 1~2 seconds immediately after connection. If possible, connect the iPod to the vehicle with the iPod stopped/ paused.
Within iPhones, streaming audio and iPod control may occasionally conflict. If problems persist, remove the iPhone and connect again.
When connecting to iPod Nano /Classic, the HYUNDAI Motor logo appears on the Apple device. For the iPod Nano 6 generation, however, the logo image does not appear since it is not sup­ported. Also, all iPhone and iPod Touch products do not support this function.
•In Apple’s iOS 6.0 version or later, Podcast and Audiobook media files are designed to be played with the Podcasts and iBooks applications spe­cifically designed for Apple products. If the Apple device does not provide the Podcast and Audiobook lists, the playlist may not be displayed and played in the iPod mode.
If the Apple Podcasts and iBooks apps are not installed on the Apple device, but the Apple device provides the Podcast and Audiobook lists, you can play files in other categories in iPod mode.
The screen of multimedia system can be different when you run other music players (e.g. iHeartRadio) on your con­nected device.
02
iPod I 2-15
Caution
•While using a connected iPhone/iPod Touch device, it may not operate nor­mally if the user changed some func­tions in the device.
•When calling with an iPhone connec­tion, song may stop playing due to an Apple device feature. If sound does not resume after the call is terminated, check the device status.
If lots of songs have the same informa­tion, skipping may occur when previous/ next song is executed due to an Apple device feature. Also problems may occur depending on device type or iOS version.
If lots of songs have the same informa­tion, the song that plays may be differ­ent between the system and the Apple device. Reset the device or delete the same songs in the Apple device using iTunes.
•If you control pause, repeat, shuffle, or seek songs when the play time is less than 3s before the song is finished play­ing, it may occur difference of playing song between the Multimedia system
•We recommend that your Apple device uses the latest firmware since some problems may occur due to an outdated firmware or other software related
issues. and Apple device. Access to iPod music from another mode or pause a song and then play a song again in Apple device.
* G: Generation
Type 1G 2G 3G 4G 5G 6G 6.5G 7G
iPod Mini Not Supported
iPod Shuffle Not Supported
iPod Nano
iPod Touch
iPad
iPad Mini
iPod Classic Not Supported
Type 3G 3GS 4 4S 5 5C 5S 6 6+
iPhone
(iOS 1.1 not
supported)
Not verified,
Normal working not guaranteed
(Unable to charge, Not verified, Normal working not guaranteed)
(Unable to charge, Not verified, Normal working not guaranteed)
(iPod with
Video)
(iPod
Classic)
Not
released
Not released
(iPod
Classic)
released
Not
2-16 I Radio/Media
Caution
•If the iPhone/iPod Touch supports Bluetooth, the Apple device will not be able to use the Bluetooth function if the device is connected through both the USB port and via Bluetooth. Disconnect the USB connection then use Bluetooth Audio.
If iPod/iPhone connected to the Multimedia system through both USB and AUX. iPod/iPhone keeps output sound via AUX, thus it may occur sound will not output in iPod mode.
If AUX cable connected to iPod/iPhone but not connect to the Multimedia sys­tem, it may occur sound will not output in iPod mode due to iPod/iPhone’s fea­ture. Especially, if you use AUX cable like pictures, this problem may occur.
Disconnect AUX cable from iPod/iPhone first, then connect to the Multimedia system via USB. Or change settings to “Dock” in iPod/iPhone.
•If connect to the Multimedia system while podcast or iTunes music down­loading to iPod/iPhone, it may occur some problems when you select song in the list. Reconnect iPod/iPhone to the Multimedia system when downloading is finished or the file deleted.
•If connect to the Multimedia system while sync, it may occur some problems. Try to use iPod/iPhone connection after sync complete. (To learn more, refer to your iPod manual)
iPhone and iPod Touch devices are guaranteed to work normally on iOS
9.3.2 or below. However, they may not work normally on future iOS versions as their operations have not yet been tested.
02
iPod I 2-17
iPod Mode Display Controls
Features Description
Mode
Song Index
Repeat/Shuffle
Play Time
Song Info
List
Displays the current operating mode
Shows the current song/total songs
From Repeat/Shuffle, displays the current operating function
Displays the current play time/total play time
Displays the artist/song title/album info
Moves to the list screen
Features Description
If button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
Previous File
previous file
• If play time is more than 3 seconds, play the current file from the beginning
If button is pressed (more than 0.8 seconds) it rewinds the track
Play/Pause
Plays/pauses the current file
• If button is pressed (less than 0.8 seconds):
Next File
Moves to the next file
• If button is pressed (more than 0.8 seconds): It fast-forwards the track
Repeats the current file
Repeat
Select the
Repeat
button to switch between repeat-
ing 1 track, and turning repeat off
Plays files in random order
Shuffle
Shuffle
When selecting the shuffle category → deactivate shuffle then repeat
• Shuffle category: Shuffle song in the current category
Back Button
Returns to basic screen
Sound settings: Moves to the Sound settings
Menu
screen. You can change the settings of the sound.
button, it changes to
2-18 I Radio/Media
Features Description
TUNE
knob to search a desired
knob to play the track.
TUNE
knob is not pressed within
TUNE
Turn the track. If the desired track is displayed, press
TUNE
the
If the 5 seconds of searching tracks, the track info
for the current track is restored.
iPod I 2-19
02
Features Description
Category Name
Displays the category name
Displays the contents of selected category
Category List
If there are many items in the list, items are
added in order and the scroll bar on the right is adjusted accordingly.
Back Button
Upper
Category
Returns to basic screen
Moves to Upper Category
Search tracks by the list type. Search songs according to Playlist, Artist, Song, Album,
Search Menu
Genre, Composer, Podcast and Audiobook.
If access the search menu while playing a
track, it moves to the previous search mode.
TUNE
Turn the
knob to search a desired
track. If the desired track is displayed, press
TUNE
the If you do not anything with the knob for
5 seconds, the
knob to play the track.
TUNE
TUNE
terminated.
• If button is pressed (less than 0.8 seconds): Plays previous/next track.
SEEK/TRACK
• If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewind or fast-forward the track.
knob search will be
2-20 I Radio/Media
AUX
Connecting an External Device
If an external device connector is con­nected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored.
AUX mode can be used only when an external audio player has been con­nected.
•The AUX volume can also be controlled separately through the connected device.
NOTICE
If only a cable is connected to the AUX
without an external device, the mode will be changed to AUX, but noise may occur. When an external device is not being used, remove the connector jack.
When the external device power is
connected to the power jack, playing the external device may output noise. In such cases, disconnect the power connection before use.
The actual feature in the vehicle may
differ from the illustration.
AUX I 2-21
02
Bluetooth Audio
Bluetooth Audio Mode Display Controls
Features Description
Mode
Phone Name
Artist Info
Title
Previous File
Play/Pause
Next File
Menu
TUNE
SEEK/TRACK
Displays the current operating mode
Displays name of connected phone
Name of current artist
Name of current song
• If play time is less than 3 seconds, moves to the previous file
• If play time is more than 3 seconds, plays the current file from the beginning This function may differ depending on the
model of mobile phone
Plays/Pauses Bluetooth Audio
Moves to the next file
• Connection settings: Moves to the Bluetooth settings screen. You can pair a new device or change/delete paired device(s).
• Sound settings: Moves to the Sound settings screen. You can change the settings of the sound.
TUNE
is not supported.
Plays the previous/next file
Information
Artist info and Title may not be supported by mobile phone.
2-22 I Radio/Media
Bluetooth Connections Settings
Settings for pairing, connection and dis­connection of a Bluetooth device.
•In Bluetooth Audio play screen, select
Menu
and then
Information
If the music in the mobile phone is not
played after changing to audio streaming mode, press the play button. Thus check if the music is playing in the Bluetooth device after changing to audio streaming mode. Audio streaming may not be supported for some mobile phones.
Connections
.
02
Bluetooth Audio I 2-23
My Music
My Music Mode Display Controls
Features Description
Mode
File Index
Repeat/Shuffle
Play Time
Song Info
Displays the current operating mode
Shows the current file/total files
From Repeat/Shuffle, displays the current oper­ating function
Displays the current play time/total play time
Displays the information about the current track
• When a track in the file tab on the list screen is selected: Displays file, artist, title, album info
• When a track in the other tab on the list screen is selected: Displays artist, title, album info
Features Description
List
Previous File
Play/Pause
Next File
Repeat
Moves to the list screen
If button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to previous file
• If play time is more than 3 seconds, play the current file from the beginning
If button is pressed (more than 0.8 seconds) it rewinds the track
Plays/pauses the current file
• If button is pressed (less than 0.8 seconds): Moves to the next file
• If button is pressed (more than 0.8 seconds): It fast-forwards the track
Repeats the current file
• If user selects song in the file tab on the list screen: Select the between repeating one song and turning repeat off.
• If user selects song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select
Repeat
the one song and turning repeat off.
button to switch between repeating
Repeat
button to switch
2-24 I Radio/Media
Features Description
Plays files in random order
• If user selects song in the file tab on the list
Shuffle
Shuffle
screen: Select the between shuffle and turning shuffle off
• If user selects song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select
Shuffle
the
button to switch between shuffle
and turning shuffle off
• Add to playlist: Adds the current song to the Playlist. Playlist is placed on the left tab in the list.
Menu
• Delete current file: Deletes the current track from My Music.
• Sound settings: Moves to the Sound settings screen. You can change the settings of the sound.
TUNE
Turn the
knob to search a desired
track. If the desired track is displayed, press the
TUNE
TUNE
knob to play the track.
If the
TUNE
knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.
button to switch
My Music I 2-25
02
Features Description
Folder/ Category Name
Current Song
Back Button
Upper Folder
Displays folder/category name in the list
Displays the current playing file name
Returns to basic screen
Moves to Root Folder
Features Description
• Add to playlist: Adds the current track to the Playlist. Playlist is placed on the left tab in the list (Maximum 100 files). Select a track and press “Add to playlist” to add the track in the playlist.
Menu
• Show current track: When moving to a differ­ent list screen, moves to the list page where the current file is located (Becomes disabled when the current list includes the current file)
• Delete files: Deletes files from My Music
If delete file from My Music, the information related to song also deleted in the list.
Search tracks by the list type. Search songs
Search Menu
according to File, Playlist, Artist, Song and Album.
If access the search menu while playing a
track, it moves to the previous search mode.
TUNE
Turn the
knob to move the focus to
previous/next file. If the file you want to play is
TUNE
displayed, press
If the
TUNE
TUNE
knob is not pressed within 5 seconds of searching tracks, Tune search will be terminated.
• If button is pressed (less than 0.8 seconds): Plays previous/next track.
SEEK/TRACK
• If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewind or fast-forward the track.
knob to play the track.
2-26 I Radio/Media
part.3
Before Using the Bluetooth® Handsfree
Bluetooth
Bluetooth Connection
Bluetooth Phone
Bluetooth
Before Using the Bluetooth® Handsfree
What is Wireless Technology?
Bluetooth
to a short-distance wireless network­ing technology which uses a 2.45GHz frequency to connect various devices within a certain distance.
Supported within PCs, external devices, Bluetooth tronic devices, and automotive environ­ments, to be transmitted at high speeds without having to use a connector cable.
Bluetooth which allows the user to conveniently make phone calls with Bluetooth mobile phones through the Multimedia system.
Bluetooth®
®
Wireless Technology refers
®
phones, PDAs, various elec-
Bluetooth
®
Wireless Technology
®
Handsfree refers to a device
The Bluetooth
®
Handsfree feature may
not be supported in some mobile phones.
WARNING
- Distracted Driving
Focus on the road while driving. The driver’s
primary responsibility is in the safe and legal operation of the vehicle. Drivers should not use any hand held devices or other equipment or vehicle systems that distract the driver during vehicle operation.
Do not stare at the multimedia screen for long
periods of time while driving. Staring at the screen for prolonged periods of time can lead to traffic accidents and can result in personal injuries.
®
Precautions for Safe Driving
Bluetooth ers to make handsfree calls. Connecting the head unit with a Bluetooth allows the user to conveniently make calls, receive calls, and manage the phonebook. Before using Wireless Technology, carefully read the contents of this user’s manual.
Excessive use or operations while driv­ing may lead to negligent driving prac­tices and be the cause of accidents. Do not operate the device excessively while driving.
•Viewing the screen for prolonged peri­ods of time is dangerous and may lead to accidents. When driving, view the screen only for short periods of time.
®
is a feature that enables driv-
®
phone
Bluetooth
®
3-2 I Bluetooth
CAUTIONS upon Connecting
®
Bluetooth
Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth tures
Even if the phone supports Wireless Technology, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth Disable the hidden state or turn on the Bluetooth connecting with the head unit.
If Auto Connection is used, the Bluetooth nected when the ignition is turned on, making it unnecessary to have to con­nect the phone with the head unit every time.
Phone
®
Bluetooth
®
power is turned off.
®
power prior to searching/
®
phone is automatically con-
fea-
If you do not want automatic connection with your Bluetooth Bluetooth
®
feature off of the Bluetooth®
®
device, turn the
device.
Park the vehicle when connecting the head unit with the mobile phone.
®
Bluetooth
®
connection may become intermittently disconnected in some mobile phones. Follow these steps to try again.
1. Turn the Bluetooth® function within the mobile phone OFF/ON and try again.
2. Turn the mobile phone power OFF/ ON and try again.
3. Completely remove the mobile phone battery, reboot, and then again.
4. Reboot the Multimedia System and try again.
5. Delete all paired devices from both of Phone and Head Unit sides and then try again
The Handsfree call volume and quality may differ depending on the mobile phone.
Pairing Bluetooth other Bluetooth
®
devices and use of
®
features are not sup­ported when the vehicle is in motion. For safety, please first park your vehicle.
If you continue having issue download­ing your contacts to your vehicle, con­tact your mobile phone provider.
03
Before Using the Bluetooth® Handsfree I 3-3
Bluetooth Connection
Pairing a New Device
Before you can use the Bluetooth feature, you must first pair/connect your mobile phone to your car. Up to 5 Bluetooth devices can be paired. Only one Bluetooth device can be con­nected at a time.
Pairing a New Device by Selecting Phone/Call
Press the
the steering wheel control. ▶ Select
Yes
phone detects the Bluetooth device. Enter the passkey or accept the authoriza­tion popup. ▶ Connect Bluetooth.
PHONE
key or key in
Pair your car after your mobile
Pairing a New Device Through the Phone Settings
Press the
Select
Add new
SETUP
key. ▶ Select
Bluetooth connections
.
Pair your car after your
mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.
The default passkey is 0000. The vehicle name above is an example. Check the actual information on the product.
.
Phone
Select
Connecting Bluetooth Devices
Connects the Bluetooth devices that you
.
add.
Connecting Devices by Selecting Phone/Call
Press the
the steering wheel control. ▶ Select the name of the device to connect. ▶ Connect Bluetooth.
PHONE
key or key in
3-4 I Bluetooth
Connecting Devices Through the Phone Settings
Press the Select
SETUP
key. ▶ Select
Bluetooth connections
name of the device to connect. ▶ Connect Bluetooth.
Phone
.
Select the
.
Disconnecting Bluetooth Devices
Disconnects Bluetooth devices that are connected.
Press the Select
name of the device to disconnect.
SETUP
key. ▶ Select
Bluetooth connections
.
Select the
Phone
Deleting Bluetooth Devices
Deletes the Bluetooth devices that you added. Note that deleting a Bluetooth device will delete all Call History and Contact Info downloaded along with it.
.
Press the Select
Delete devices
SETUP
Bluetooth connections
.
delete. ▶ Select
key. ▶ Select
Select the device name to
Delete
.
.
Phone
Select
.
03
Bluetooth Connection I 3-5
Bluetooth Phone
Phone Status Icons
Shows the current phone status in the left top of the display.
Icons Description
You can use Bluetooth phones when a Bluetooth Hands-free connection is established.
You can use Bluetooth Audio features when a Bluetooth Audio connection is estab­lished.
You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are estab­lished.
Call signal strength indicator
Battery level of the Bluetooth devices connected
Downloading Call History list
Downloading Contacts
In a Bluetooth phone call
Microphone muted
Information
The battery level icon and the call signal
strength indicator may not be supported in some Bluetooth devices.
The battery level may differ from the actual
level remaining.
3-6 I Bluetooth
Dial
Dials a call after the Bluetooth devices are connected.
Phone
PHONE
key or key in
All Menus
icon.
icon, and
Press the
the steering wheel control.
You can also select then
Name Description
Use the keypad to enter the phone number that you want
Keypad
Call
Settings
Delete
to call. Press and hold the last number of a speed dial to dial a number that you added to the Speed Dial list in the phone
Makes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to automatically dial that number again.
Moves to a screen of Phone settings.
Deletes the numbers that you entered.
Information
Some types of mobile phones may not
support the Speed Dial function.
Accept/Reject Call
If there is an incoming call after you made a Bluetooth connection, a popup message will appear.
Name Description
Accept
Reject
Information
In some mobile phones, the caller’s number
may not be displayed, and the Reject feature may not be supported.
Answers the call.
Ignores the call.
03
Bluetooth Phone I 3-7
Using the Menu During a Phone Call
When making a call, you can use the fol­lowing menu items.
Name Description
Use private
End
Contacts
Outgoing
Volume
Keypad
Switch
Switches a voice call from the car Hands-free to the mobile phone.
Ends a call.
Displays the Contacts list.
Displays the Mic Volume settings. You can adjust the in-call volume that the other party hears (level 1 - 5).
Moves to a screen for entering ARS numbers.
Switches to a call on hold, if any. You can also switch calls by select­ing the number in the Information Display. The Switch function switches the current call to a waiting call in order to answer a new incoming call.
Information
If the caller’s number is listed in Contacts,
the caller’s name will be displayed. Otherwise, only the number will be displayed. In some mobile phones, the phone number may not be displayed.
In some Bluetooth devices, the Use
Private feature may not be supported.
In some Bluetooth devices, the Switch
feature may not be supported.
During a phone call on a Bluetooth Hands-
free, you cannot access other modes, such as Radio and Settings.
Depending on handset types, the in-call
volume the other party hears may differ. If the other party hears your voice too low or too loud, adjust the mic volume.
3-8 I Bluetooth
Call history
Press the
PHONE
key, and then
Call history
Name Description
.
All
Dialled
Received
Missed
Call history
Information
Download
Call
Contact
information
Lists the all call history.
Lists the calls that you made.
Lists the calls that you have received.
Lists the calls you missed.
Displays all of your call history. Select from the list to dial the number.
Displays the details of your call history information.
Downloads the call his­tory information from your mobile phone.
Dials the selected number in your Call History Information.
Goes to the Contact Information screen if the number has been stored.
Information
In some mobile phones, call records may
not be added to your Call History.
Calls from restricted ID’s are not added to
your Call History Information.
Up to 50 calls can be added in each Dialed
Calls/Received Calls/Missed Calls list.
The durations of each dialed/received call are
not displayed in your car’s Call History list.
While the call history download is in progress,
the status bar displays an icon (
If the call history download is turned off
on the Bluetooth device, the call history download will fail.
Some devices require a device authentication
for downloading your call history. If download fails, check if the Bluetooth settings or display status are normal.
Some devices do not support call history
download. Check if your Bluetooth device supports download feature.
).
Bluetooth Phone I 3-9
03
Contacts
Press the
PHONE
key, and then
Contacts
Name Description
.
Contacts List
Information
Download
Search by
name
Search by
number
Add to
favourites
The list of Contacts. Select from the list to dial the number.
Displays contact infor­mation.
Downloads contacts from your mobile phone.
Searches Contacts for the name that you enter.
Searches Contacts for the number that you enter.
Adds a phone number to Favourites.
Information
Up to 5000 phone numbers can be
downloaded from a single, paired Bluetooth device.
You cannot edit or delete downloaded
phone numbers from your car.
Contacts can be viewed only when the
Bluetooth device is connected.
Even if the Bluetooth device is
disconnected, the downloaded data will remain. (Note that deleting a paired phone will also delete all downloaded Contacts and Call History data)
Downloaded phone numbers may be lost
depending on the condition of the head unit. Keep your important data in a safe place.
Contacts from both the SIM card and your
mobile phone are downloaded at the same time by default.
The status bar displays a ( ) while
downloading contacts.
The download will not be available if the
contacts download function is turned off on your Bluetooth device.
3-10 I Bluetooth
Some devices require a device authentication
for downloading your contacts. If download fails,check your phone screen and confirm the download if necessary.
Some devices do not support contacts
download feature. Check if your Bluetooth device supports contacts download.
Favorites
Press the
PHONE
key, and then
Name Description
Lists the phone
Favourites
Add new
Delete
numbers saved as Favourites. Select from the list to dial the num­ber.
Adds a new number to Favorites.
Deletes numbers that you select from Favourites.
Favourites
.
03
Bluetooth Phone I 3-11
MEMO
part.4
Other Features
Camera
Other Features
Camera
WARNING
- Backing Up & Using Camera
Never rely solely on the rear view camera
when backing up. Prior to entering your
vehicle always do a visual check of the area
behind your vehicle, and before backing up
be aware of your surroundings and supple-
ment the rear view camera by looking over
your shoulders and checking your rear view
mirrors. Due to the difficulty of ensuring that
the area behind you remains clear, always
back up slowly and stop immediately if you
even suspect that a person, and especially
a child, might be behind you.
Information
A separate chipset is used for the camera
screen while booting up, so it may be different after booting up.
About Rear Detection Camera
This device is connected to a rear detection camera to see behind the car when reversing.
The Rear View Camera turns on auto­matically if you shift the gear to R when the power is on or the engine has started.
While the device boots up, shift the gear to “R” to activate the rear detection cam­eras. Shift the gear to another position to deactivate the rear detection camera.
NOTICE
A wide-angle lens is installed as the rear
detection camera to get a wider view, so there may be some difference between the actual distance and the distance that appears. on-screen. For safety, make sure to view the back, right, and left sides of the car for yourself.
The color of the parking guidelines displayed
in the picture may differ from the actual screen.
When booted up, blinking may occur when
you switch to a UI screen.
4-2 I Other Features
part.5
Settings
Settings
Sound settings
Display settings
Phone settings
Phone projection settings
Date/Time settings
Language settings
Keyboard settings
Screensaver settings
System info
Settings
Settings
Settings
Settings is the screen to control Audio sys­tem settings. To enter the screen, press the key or the
icon in All Menus.
SETUP
5-2 I Settings
Features Description
Provides the sound con-
Sound
Display
Phone
Phone
projection
Date/Time
trol options for Position, Equaliser (Bass, Mid, Treble), Loudness, Advanced settings.
Provides the Dimming, Illumination, Adjust, Ratio settings.
Provides the Bluetooth con­nections/Auto connection priority/System Bluetooth info settings.
For more details, refer to the separate Phone Projection guide.
Provides the Date/Time settings.
Features Description
Language/

Keyboard
Screensaver
System Info
Display Off
Provides the Change Language settings.
Provides settings to switch keyboard layouts.
Provides settings for clock (Digital/Analogue)/no dis­play.
Provides software and stor­age space information.
Provides the Display Off (touch activation) function.
Sound settings
Centre
Centre
Adjusts the sound effects for the whole system.
Features Description
Select the Up/Down/Left/ Right button to control
Position
Equaliser
Loudness
sound positioning. Select trate the sound on the center of vehicle.
Drag the slide bar to control bass/mid/treble settings. Select the settings.
Sets the volume priority for Rear parking sensors prioritised, and volume limitation on startup.
to concen-
to initialize
Features Description
Select additional audio options such as “Speed
Advanced
Default
Beep
Dependent Volume Control” that automatically controls Audio volume according to vehicle speed.
Resets the sound to fac­tory default settings.
Select to activate a beep when pressing buttons.
Information
Advanced sound settings may differ according
to selected AMP option.
The seat shape may differ according to
vehicle model.
05
Settings I 5-3
Display settings
Phone
Adjusts the level of illumination for the entire system.
Features Description
Select any of LCD illumi-
Dimming
Illumination
nation change modes: Automatic (changes the level automatically), Daylight, and Night.
Set the levels of illumina­tion for day and night.
Features Description
Adjust the hue, contrast
Adjust
Ratio
Default
Display Off
and saturation of the screen by dragging the sliders.
Aspect ratio can be switched between Normal, Full and Wide. This option is available only when in video mode.
Resets the display to fac­tory default settings
Provides the Display Off (touch activation) func­tion.
Phone settings
Changes Bluetooth phone settings.
Phone settings
Press the
icon.
SETUP
key ▶ Select
5-4 I Settings
Bluetooth connections
Phone
Bluetooth connections
Phone
Factory settings
Press the
Select
SETUP
key ▶ Select
.
Features Description
Displays the paired Bluetooth device list.
Paired Device
List
When selecting from the list, the device is connected or discon­nected.
Bluetooth
Audio Connection Status
Bluetooth
Hands-Free Connection Status
Add new
Delete devices
An icon appears when you make a Bluetooth Audio connection.
An icon appears when you make a Bluetooth Hands-free connec­tion.
Register a new Bluetooth device.
Select and delete a paired device.
Information
Up to 5 Bluetooth devices can be paired.
Only one Bluetooth device can be connected
at a time.
During a Bluetooth device connection, another
device cannot be paired.
When you delete a paired device, the Call
History and Contacts stored in the head unit are also deleted.
Bluetooth Hands-free and Bluetooth Audio
functions are supported.
Hands-free and audio-supported devices,
such as a Bluetooth smartphone or audio, will function normally.
When a Bluetooth device is connected, if
the Bluetooth connection is unexpectedly disconnected, due to being out of communication range, the device powering off, or a Bluetooth communication error, the Bluetooth device automatically searches for and connects to nearby Bluetooth devices.
If the system is not stable, due to a vehicle-
Bluetooth device communication error, restore the Default Factory Settings.
For Default Factory Settings, the bluetooth
settings are reset to factory settings.
Press the
Select
SETUP
key ▶ Select
.
05
Settings I 5-5
Auto connection priority
Phone
Auto connection priority
Phone
System Bluetooth info
Press the
Select
SETUP
key ▶ Select
.
System Bluetooth info
Press the
Select
SETUP
key ▶ Select
.
Phone projection settings
For more details, refer to the Phone pro­jection guide.
When the engine is running, the selected Bluetooth device is automatically con­nected. If you fail to connect the selected device, the previously-connected device is automatically connected, and if it also fails, then it tries to connect all paired devices sequentially. Depending on auto connection priority, connection to a device may take time.
5-6 I Settings
Features Description
Vehicle
name
Passkey
You can change the Bluetooth device name of the vehicle.
You can change the pass­key used for Bluetooth device authentication. the initial passkey is 0000.
Information
The vehicle name above is an example.
Check the actual information on the product.
Date/Time settings
Language settings
Keyboard settings
Configure the settings for time and date. Using the arrow buttons, you can change the values. Date/Time settings do not automatically change when crossing into different time zones. The time must be changed manually on this screen.
Features Description
If you tap any value, you
Direct entry
24-hour
can directly enter the number in the following screen.
The time display is set in 24-hour format.
You can configure the displayed system language.
When the language is changed, the system language is automatically changed. Unique data including MP3 file name is not changed.
You can configure the keyboard layout for each language.
You can configure ABCD or QWERTY keyboards for the system.
Information
Configured keyboard layouts are applied
to all input modes.
05
Settings I 5-7
Screensaver settings
Update
Update
You can select any of the following screen formats to be displayed when the screen or power is turned off.
• Digital clock and date
• Analogue clock and date
• None
System info
At the System Info screen, software ver­sion information, updates, and storage status details are available.
System Update
At the System Info screen, insert the USB memory with the latest file downloaded, and then select the updating. The system will then reboot automatically.
Information
This product needs supplemented
software updates and additional functions, which collectively may take some time to complete, depending on the amount of data.
button to begin
5-8 I Settings
Features Description
System version informa­tion and update details are available.
Version
info
Memory
Select the to update the system. After update is complete, the system will reboot automatically.
Displays the memory space available for media storage.
button
CAUTION
If the power is disconnected or the USB is
removed during an update, the data might be damaged. Please do not turn off the vehicle while an update is in progress.
part.6
Appendix
Product Specification
Troubleshooting
FAQ
Appendix
Product Specification
TFT-LCD
Screen Size 7 inch (154.08 x 85.92 mm)
Resolution 384,000 pixels (Resolution : 800 x 480)
Operating Method
Viewing Angle Left/Right: ALL 80˚, Top/Bottom: 60˚/80˚
Internal Lighting LED
Radio
Channels
Sensitivity FM: Under 10 dBu/AM: Under 40 dBu
Distortion Factor Within 1%
TFT(Thin Film Transistor) Active Matrix
FM: 87.5 MHz ~ 108 MHz(Step: 100 kHz)
AM: 531 kHz ~ 1602 kHz(Step: 9 kHz)
Common
Name Car TFT LCD Display Audio Unit
Power Supply DC 14.4V
Current Consumption
Operating Temperature
Dimensions 236 x 157 x 206 mm
Weight 1650 g
Max 10A
-20 ~ +70°C (-4 ~ +158°F)
Operating Powe r
Sleep Current
Storage Temperature
DC 9V ~ DC 16V
2mA (Head Unit Only)
-30 ~ +80°C (-22 ~ +176°F)
6-2 I Appendix
Bluetooth
®
Wireless Technology
Frequency Range
Supported Profile
2402 ~ 2480 MHz
Handsfree (1.6), A2DP (1.2), AVRCP (1.5), PBAP (1.1), GAVDP (1.2)
Supported Bluetooth
®
Specification
3.0
Output
Number of Channels
79 channels
CAUTION
The producer and installer cannot provide services related to life safety
as the concerned radio equipment is liable to radio interference.
06
Appendix I 6-3
Troubleshooting
1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device.
2. If you are having problems with the device, try the suggestions listed below.
3. If the problems persist, contact your Hyundai dealer.
Problem Possible Cause
There are small red, blue, or green dots on the screen
The sound or image is not working
The screen is being dis­played but sound is not working
When the power is turned on, the corners of the screen are dark
Sound is working from only one speaker
•Because the LCD is manufactured with technology requiring high point density, a pixel or lighting deficiency may occur within 0.01% of total pixels
Has the Switch for the vehicle been turned to [ACC] or [ON]?
Has the SYSTEM been turned OFF?
Has the volume been set to a low level?
Has the volume been muted?
The display appearing somewhat dark after prolonged periods of use is normal with LCD panels. It is not a malfunction
If the screen is very dark, contact your nearest Hyundai dealer for assistance
Are the positions of Fader or Balance sound controls adjusted to only one side?
Problem Possible Cause
Sound does not work in AUX mode
The external device is not working
Upon turning power on, the most recent mode screen is not displayed
Are the audio connector jacks fully inserted into the AUX terminal?
Is the external device connected with a standard connector cable?
Within modes that play files by reading external sources, such as USB, iPod, or Bluetooth recently played mode screen prior to turning off power may not properly load
®
If the corresponding device is not con­nected, the mode operated prior to the most recent mode will operate If the previous mode still cannot be prop­erly played, the mode operated prior to that will operate
streaming mode, the most
6-4 I Appendix
Problem Possible Cause Countermeasure
Replace with a suitable fuse
If the fuse is disconnected again, please contact your point of purchase or Hyundai dealer
Check to see that the device has been properly connected
Charge the battery If the problem persists, contact your point of purchase or Hyundai dealer
The power does not turn on
The system does not play
The fuse is disconnected
Device is not properly connected
The vehicle battery is low
Problem Possible Cause Countermeasure
The image color/tone quality is low
Sound does not work
The brightness, satura­tion, hue, and contrast levels are not set prop­erly
The volume level is set to the lowest level
•The connection is not proper
•The device is currently fast-for­warding, rewinding, scanning, or playing in slow mode
Properly adjust the bright­ness, saturation, hue, and contrast levels through Display settings
Adjust the volume level
•Check to see that the device has been properly connected
•The sound will not work when the device is fast-for­warding, rewinding, scan­ning, or playing in slow mode
The sound or image quality is low
•Vibration is occur­ring from where the conversion switch has been installed
Image color/tone quality is low
•The sound may be short-cir­cuited and the image dis­torted if the device vibrates
The device will return to nor­mal once vibrations stop
Appendix I 6-5
06
Problem Possible Cause Countermeasure
USB memory is damaged
USB memory has been contaminated
Please use the USB after formatting it.
Remove any foreign sub­stances on the contact surface of the USB memory and multimedia terminal
A separately pur­chased USB HUB is being used
Directly connect the USB memory with the multime­dia terminal on the vehicle
Problem Possible Cause Countermeasure
The iPod is not recog­nized even though it has been con­nected
There are no titles which can be played
The iPod firmware version has not been properly updated
The iPod device does not recognize
Use iTunes to download and save MP3 files into the iPod
Use iTunes to update the firmware version and recon­nect the iPod with the device
Reset the iPod and reconnect with the device
downloads
The USB does not work
6-6 I Appendix
A USB extension cable is being used
A USB which is not a Metal Cover Type USB Memory is being used
An HDD type, CF, SD Memory is being used
•There are no music files which can be played
Directly connect the USB memory with the multime­dia terminal on the vehicle
•Use standard USB Memory
Use standard USB Memory
•Only MP3, WMA file formats are supported. Please use only the supported music file formats
Bluetooth does not work or its limited func­tions are available
Bluetooth on your mobile phone is set to OFF
The Bluetooth con­nection is not made
Set it to ON
Make the connection active
FAQ
Phone
System Bluetooth info
Passkey
About Pairing Mobile Phones
Q I cannot pair my mobile phone. What is the cause?
A
Check to see that the mobile phone supports Bluetooth® func­tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set it to ON. If the cell phone still can’t be registered, try again after turning Bluetooth off and on, or delete the device registration on the multimedia system and cell phone and then register the cell phone again.
Q
What is the difference between pairing a mobile phone and connecting a mobile phone?
A
Pairing occurs through authenticating the head unit and mobile phone. Mobile phones paired to the head unit can be connected and disconnected until the paired mobile phone is deleted from the system. Bluetooth
®
Handsfree features, such as making/ answering calls or managing contacts, are supported only in mobile phones connected with the head unit.
Q What is a Passkey?
A
A passkey is the password used to authenticate the connection between the head unit and mobile phone. The passkey only needs to be entered once when pairing the mobile phone for the first time.
The initial passkey is 0000. You can change it with
SETUP
menu
options.
06
Appendix I 6-7
About Making/Answering Phone Calls
Accept
Reject
Use private
Q How can I answer a call?
A
When there is an incoming call, a notification pop-up will become displayed. To answer the incoming call, select the
button on the screen or press the
steering wheel control.
To reject the call, select the press the
What should I do if I am talking on the Handsfree but want to
Q
switch the call to the mobile phone?
A
While on a call, press and hold (more than 0.8 seconds) the
switch the call to your mobile phone.
key on the steering wheel control.
key on the steering wheel control or select the
button at the bottom of the Phone screen to
button on the screen or
key on the
About
Bluetooth
®
Wireless Technology/
Head Unit Use Environment
Q What is the range of my wireless connection?
A
The wireless connection can be used within 15 yards.
Q How many mobile phones can be paired?
A
It is possible to pair up to five mobile phones.
Q Why is call quality sometimes poor?
A
Check the reception sensitivity of the mobile phone when call quality becomes worsened. The call quality may deteriorate when the signal strength is low. Call quality may also worsen if metal objects, such as beverage cans, are placed near the mobile phone. Check to see if there are metal objects in the vicinity of the mobile phone. The call sound and quality may differ depending on the type of mobile phone.
6-8 I Appendix
Important Information
Before using your Multimedia system, read and follow all instructions and safety information provided in this end user manual (“User’s Guide”). Not following precautions found in this User's Guide can lead to an accident or other serious consequences.
Keep User’s Guide in Vehicle
When kept in the vehicle, the User’s Guide will be a ready reference for you and other users unfamiliar with the Multimedia system. Please make certain that before using the system for the first time, all persons have access to the User’s Guide and read its instructions and safety information carefully.
Warning
Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a safe and legal manner before attempting these operations. This is important since while setting up or changing some functions as you may to distract your attention away from the road and remove your hands from the wheel.
This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum.
06
General Operation
Prolonged Views of Screen
Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time.
Volume Setting
Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could cause an accident.
)&&:DUQLQJ
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum 20 cm between the radiator and your body.
This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the
FCC.

MEMO
MEMO
MEMO
MEMO
Loading...