Hyundai S465D User Manual
Type No. LT46DW001
Model. S465D
Multi Function 2D/3D Wide Monitor
User’s Guide
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for
a Class A digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/Monitor technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
DECLARATION OF CONFORMITY
WE HYUNDAI IT CORP.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment : LCD MONITOR
Type-Designation : LT46DW001
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : EN 60065:2001+A1
EMC : EN 55022/1998+A1:2000+A2:2003
EN 55024 :1998+A1:2001+A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
KOREA / January 30, 2009 Jong Won, Choi Ho Suk, Chon
(Place and date of issue) (Name and signature of authorized person)
S465D
Multi Function 2D/3D Wide Monitor
Contents
S465D
Multi Function 2D/3D Wide Monitor
1. Introduction ................................................................1/51
2. Safety Information ..................................................... 1/51
3. Safety Tips ................................................................... 7/51
4. Handling Instructions ................................................ 8/51
5. 3D Monitor Setting Guide .......................................... 8/51
6. Q&A for 3D Mode ....................................................... 9/51
7. 3D Mode Specification .............................................11/51
8. Installing the monitor............................................... 12/51
9. Title and function of each part ................................ 14/51
Front .......................................................................................... 14/51
Rear ............................................................................................ 15/51
Remote Control ......................................................................... 16/51
How to insert batteries ............................................................ 16/51
10. How to connecting Digital RGB (HDMI) ................ 17/51
HDMI PC Timing ........................................................................ 18/51
HDMI Video Timing .................................................................. 18/51
11. How to connecting analog RGB (PC D-SUB) .........19/51
Support timing for PC............................................................... 20/51
12. How to connecting the component ......................21/51
Support timing for component ................................................ 22/51
13. How to Connecting the S-Video or Video ............ 23/51
14. Adjusting OSD and explanation of its function ... 24/51
15. 3D Setting ............................................................... 40/51
16. Display power management.................................. 46/51
17. Troubleshooting ...................................................... 47/51
18. Specifications .......................................................... 51/51
S465D
Multi Function 2D/3D Wide Monitor
1/51
1. Introduction
This manual contains instructions for installing and operating HYUNDAI IT CORP. S465D.
HYUNDAI IT CORP. S465D is a highly ergonomic color display unit.
46” viewable WUXGA LCD
High quality screen re-scaling capability
100-240V AC input voltage
VESA DPMS (Display Power Management Signaling)
VESA DDC1/2B compatibility
Advanced digital On-Screen-Display controls
Digital Signal Input by HDMI Compatability
Fast and accurate auto adjustment
Most advanced image scaling
Supporting VESA Flat Panel Monitor Physical Mounting Interface
2D/3D Convertible
•
•
•
•
•
•
•
•
•
•
•
2. Safety Information
The socket-outlet shall be installed near the equipment and shall be easily accessible.
This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind the following:
If there is a persistent accumulation of dusts or water on the
plug, please make sure to wipe it off using a dry cloth.
- It may cause a fire or an electric shock.
S465D
Multi Function 2D/3D Wide Monitor
2/51
Firmly plug in the power cord so that it does not pull out.
- An unstable connection may cause fire.
Do not use a damaged power cord or plug, or loose outlet.
- It may cause electric shock or fire.
Do not put a water bowl, vase, candle, bug repellant smoke,
cigarette, plants, or heavy thing on the monitor.
- It may cause electric shock or fire and also heavy things may
cause injury when they fall.
Do not install in a place where there is oil, smoke, excessive
humidity, or where water may be sprinkled on it.
- This may cause electric shock or fire.
Do not install on an unstable place or small support.
- This may cause the monitor to fall, resulting in serious injury
especially to children.
S465D
Multi Function 2D/3D Wide Monitor
3/51
Never attempt to open, fix, or modify your monitor.
- When there is a need for fixing, call a service center.
Fire or electric shock may be caused.
Do not put a metallic object like chopstick, wire, or puncher or in
flammables like paper or a match in a vent, headphone jack, or
AV jacks of the monitor.
- Electric shock or fire may be caused.
When the monitor produces abnormal noise, burning smell, or
smoke, unplug the monitor immediately and call a service center.
- Electric shock or fire may be caused.
Please avoid touching the panel at the rear of monitor as it is
producing high temperature.
- Direct contact with the hot surface may cause physical burns.
Do not place any heat sources such as radiators and heat
registers, etc. near the monitor.
- It may cause a fire.
S465D
Multi Function 2D/3D Wide Monitor
4/51
Do not block ventilating slits with a tablecloth.
- Blocking the ventilation slits may produce internal heat increase,
resulting in a fire.
Do not allow children to climb or play on the monitor.
- This may cause the monitor to fall resulting in serious injury.
Do not place toys and cookies, etc. on the monitor, which may
attract children’s attention.
- This may cause the monitor to fall, resulting in serious injury.
When cleaning the monitor, make sure to disconnect the power
plug and use a dry, soft cloth for a cleanup.
- Please avoid using chemicals such as wax, benzene,
alcohol, thinner, mosquito spray, air freshener, lubricant or
synthetic detergent.
Unplug when you do not use your monitor for a long time.
- If dust is stacked on the monitor, electric shock or fire may be
caused from heat, fire, or deterioration of insulation.
S465D
Multi Function 2D/3D Wide Monitor
5/51
When moving the monitor, two or more people are advised to carry it.
- This may cause damage to the unit or personal injury.
Never touch the power plug or outlet with wet hands.
- This may cause electric shock.
Do not install the product on the floor.
- This may cause the monitor to fall resulting in serious injury.
Unplug the product during lightning or thunderstorms and never
touch the antenna cable.
- It may cause a fire or an electric shock.
In the event of damaging or dropping the product, switch off the
power and remove the plug.
- Using a damaged product may cause an electric shock or a fire.
- Contact your local service center.
S465D
Multi Function 2D/3D Wide Monitor
6/51
Before moving the product, ensure to switch off the power and
unplug all the electrical cords and the external connection cords
such as an antenna cable and other source connections, etc.
- Electrical cords may be damaged, resulting in a fire or an
electrical shock.
Ensure the power cord doesn’t trail across any hot objects like a
heater.
- This may cause a fire or an electric shock.
Consult a service center or customer service for inside cleaning
about once a year.
- When dust is piled inside the monitor for a longtime, fire or
malfunction may be caused.
Cleaning and Maintenance-
To avoid to risk of electric shock, do not disassemble the Cabinet of display Unit. The Cabinet
is not user-serviceable. Remember to unplug the display unit from the power outlet before
cleaning.
Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or
benzene, abrasive cleaners or compressed air.
Do not wipe the screen with a cloth or sponge that could scratch the surface.
To clean your antistatic screen, use water and a special microfiber screen cleaning tissue used
in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent.
If the instructions above do not help in removing stains, contact an authorized service agent.
•
•
•
•
•
S465D
Multi Function 2D/3D Wide Monitor
7/51
3. Safety Tips
Warning-
Viewing Time
- Do not watch 3D video continuously for multiple hours. Take a break every 15 minutes.
Please view the monitor screen over a distance 1.5M.
If you have any of the following symptoms and/or illnesses, talk to your doctor before using
this product:
An eye, ear, or heart-related illness
Convulsions due to light sensitivity
High blood pressure
If you experience convulsions, numbness, loss of orientation or consciousness, confusion, or
any other unusual mental and/or physical symptoms, stop using the product immediately and
seek medical attention.
If you experience any of the following symptoms, stop using the product immediately:
Stinging, burning, or watery eyes, dry eyes, or eyelid heaviness
Nausea, vomiting, dizziness, upset stomach, or sweating
Headache, tremors, or dry mouth
!
If these symptoms persist, seek medical attention.
•
•
•
-
-
-
•
•
-
-
-
Caution-
Do not watch 3D video while under the influence of alcohol or medication.
If you are myopic (near-sighted) or hyperopic (far-sighted), have a right and left eyesight
difference, or have astigmatism, take the necessary precautions before using the product.
You can wear the polarized eyewear on top of your glasses or contact lenses.
•
•
S465D
Multi Function 2D/3D Wide Monitor
8/51
4. Handling Instructions
How to use-
When you are viewing stereoscopic images, please use the 3D eyewear of the product.
Without these glasses, you cannot enjoy stereoscopic images. If you use some polarized
glasses from other companies, you cannot fully enjoy the stereoscopic images.
Do not use the polarized glasses for other uses other than 3D viewing.
Do not touch the surface of the monitor screen with bare hands.
When the surface of the monitor screen gets dirty, wipe it clean softly with a smooth cloth
(cotton flannel). Using detergent, solvent, etc. can cause it to get damaged.
If the stereoscopic images do not display correctly, read the product manual and 3D software
manual carefully, and follow instructions as described.
If they still display improperly, do not disassemble it and contact the Customer Support.
For how to operate LCD monitor, read "User's Guide."
!
Please do NOT disassemble the product.
•
•
•
•
•
•
•
5. 3D Monitor Setting
Guide
In case playing 3D using TriDef Software in your PC
Optimal resolution for 3D viewing is 1920x1080/60Hz.
If you run 3D on different resolutions, its 3D effects can decrease.
Use signal input source at RGB under PC or HDMI mode. HDMI mode is recommended.
Install the TriDef Software in your PC.
2. In case playing 3D by the 3D function in the monitor.
Optimal resolution for 3D viewing is 1920x1080i/P, 50/60Hz.
Use signal input source at Component or HDMI.
Press the "3D" button on the remote.
Once 3D screen is shown, display mode is automatically changed to "Auto Wide".
Viewing on a different mode may decrease 3D effects.
On Auto wide mode, according to input video signal, some noise may be displayed on the
side of screen. This noise, however, is originally caused by input video signal.
1.
•
•
•
•
•
•
•
•
S465D
Multi Function 2D/3D Wide Monitor
9/51
6. Q&A for 3D Mode
Q. There is something like oil stain on the monitor screen.
A. It is due to interferences of light waves in the air layers between the surface of LCD and the
3D filter. It is not defective.
Q. 3D stereoscopic images are seen as two separate images.
A. The 3D screen may have two overlapping scenes without 3D glasses in the accessory kit, Enjoy
3D screen wearing the 3D glasses.
A. When you watch the screen out of the range of visual angle.
Keep the distance of 1.5m from the monitor screen.
If you exceed 89° out of the left / right visual angle or 20° out of the top / bottom visual
angle while viewing 3D images, you cannot enjoy 3D images properly.
So keep the visual angle as provided above.
Q. What is the optimal resolution for 3D Mode?
A. 3D mode connecting your PC displays best 1920x1080 / 60Hz resolution.
A. 3D mode connecting visual devices such as blue-ray player displays best 1920x1080i/P, 50/60Hz
resolution.
Q. 3D screen seems to be not work properly even wearing 3D glasses.
A. It may not feel right to watch 3D Screen if the setting of the right & left screens are revered.
In case using TriDef Software, execute TriDef control panel and change "Model of Setting
Tab" to 46" LCD TV or 46" LCD TV Reverse. (Refer to the 19 page in the TriDef User's manual)
In case using 3D function from the monitor
If so, press the "REVERSE" button on the remote. (Refer to the 42 page)
Q. Can we enjoy 3D stereoscopic images with 2D Source?
A. Yes. This function virtually enables us to enjoy 3D screen with 2D source by virtual function.
In case TriDef Software is in operation, see the 16 page in the User's manual for TriDef
Software.
In case Virtual function of the monitor is in operation, press the "Virtual" button on the
remote.
-
-
-
-
-
-
S465D
Multi Function 2D/3D Wide Monitor
10/51
Q. 3D images create Ghost effect.
A. It can happen slightly depending on 3D contents. It is due to the different stereoscopic
imaging information of the camera when they are manufactured. (Use 3D contents suitable to
this product )
Q. The monitor screen reflects my face.
A. This monitor has a 3D filter on the surface of the panel. The reflection is caused by the filter.
You cannot remove it. To reduce the reflected lights, it is recommended that you don't have
any light source behind your back.
Q. 3D screen displays dimly.
A. This product has a 3D filter on the LCD surface to increase 3D stereoscopic effects.
That makes it reduce brightness. Polarized glasses can reduce its brightness as well.
Q. Picture quality looks worse than I expect.
A. Horizontal resolution displays only half of them in 3D screen, since the screen is made up of
two interlaced images.
Q. Is internet necessary to install the TriDef Software?
A. Yes, the service is only available after you register the Activation Code in the software on the
license server.
Q. Why the name of 3D files need to be changed to enjoy 3D moving pictures?
A. There are various formats for 3D moving pictures. For example, Side By Side, Interlaced,
Above-below(Top-bottom), 3D Anaglyph DEPTH Based, Forced 2-D) and so on.
Q. Is a Codec required to watch 3D screen with TriDef software.
A. Yes, there are many different kinds of zipped moving pictures made by different technologies.
Other electronic devices under the same product category also need a Codec and its software.
S465D
Multi Function 2D/3D Wide Monitor
11/51
Q. Does it support Direct X when playing 3D games through TriDef Software?
A. Yes, it supports both OpenGL from Unix(Linux) and DirectX from Microsoft.
Q. What's the difference between 3D game with TriDef Software and other 3D games?
A. While the other 3D games are made virtually from 2D image, You can feel the distance as it is
a real.
Q. Does TriDef Software support all of the 3D games in the market?
A. No, it doesn't. Every each game is optimally designed with the proper data for DEPTH of
FOCUS.
In order to design like this, it takes a lot of cost and time. That's why 3D effects in this model
are better than other 3D products. Driver concerning 3D games is being updated continuously.
Q. Screen has frequently stopped to watch 3D games & 3D moving pictures connecting my PC.
A. If the specification of your PC is not good enough, 3D screen might not be displayed smoothly.
Please check the minimum specifications of PC mentioned in the TriDef Software manual for
playing 3D screen.
Q. Is it possible to playback 3D screen on two different monitors connecting one PC?
A. You can change the display setting that displays dual screen. 3D screen, however, can't
playback if you size up the original screen.
Q. Can I use this model as a normal monitor?
A. Yes, this model can be used as a monitor since it has the same function and capability.
7. 3D Mode Specification
Alignment distance
Over 1.5m
3D Viewing Angle
H : 178 / V : ±20degrees
3D eyewear
45 degrees (optical axis)
2D/3D Image
Convertible
3D Output Image Format
Interlace
S465D
Multi Function 2D/3D Wide Monitor
12/51
8. Installing the monitor
Packing List-
The following items should be found in the packaging.
Power Cord UK Japan
Signal Cable America/Canada Europe
HDMI Cable (Option) South Africa Australia
Remote control &
batteries
HDMI to DVI Cable Audio Cable Korea
Manual 3D Soft Program 3D Eyewear
!
Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing
or damaged. Other power cord except the cord packed in the product or longer than 3m may affect EMC of the
product in operating condition.
S465D
Multi Function 2D/3D Wide Monitor
13/51
Selecting a suitable
location
-
Do not place any heat sources such as radiators and heat registers, etc. near the monitor.
Place the monitor in a position where no light shines directly onto or is reflected on the screen.
To reduce eye strain, avoid installing the display unit against a bright background such as a
window.
Position the monitor at the height of your eye level.
Position the monitor directly in front of you at a comfortable reading distance. (Over 1.5m)
•
•
•
•
•
!
Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric
shock, always connect your equipment to properly earthed outlets.
Loading...