Hyundai L19A0D061 Users Manual

FCC ID : PJIL19A0D061

ATTACHMENT E.

-

USER’S MANUAL -

REPORT NO. : HCT-F03-1004 HYUNDAI C–TECH

NEXT

Type No. L19A0D061

User’s Guide

ImageQuest L19T

TFT LCD Color Monitior

Click

www.hyundaiQ.com

U.S.A.

U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER

NOTE : This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interfer ence will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.

BACK

NEXT

WE ImageQuest CO., LTD.

Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA

declare under our sole responsibility that the product:

to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)

following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.

KOREA / April. 24, 2003 HONG KI, KIM

(Place and date of issue) (Name and signature of

authorized person)

DECLARATION OF CONFORMITY

BACK

NEXT

Kind of equipment : COLOR MONITOR

Type-Designation : L19A0D061

Safety : EN 60950 : 2000
EMC : EN 55022 : 1998, EN 55024 : 1998

EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998
EN 61000-3-3 : 1995

Accredited testlaboratory:

TÜV Rheinland

Am Grauen Stein

51105 Köln

L19T
19" TFT LCD Color Monitor

Contents

1. Introduction ...................................1/21

2. Safety Information ........................1/21

3. Installing the monitor ...................4/21

3-1. Packing List .........................................4/21

3-2. Selecting a suitable location ..............5/21

3-3. Connecting the monitor .....................5/21

3-4. Setting the refresh rate ......................8/21

Preset Timing Table ............................9/21

3-5. User’s Environment .............................9/21

BACK

NEXT

4. Adjusting the picture ..................12/21

4-1. Using the On Screen Display ...........13/21

4-2. Direct access buttons .......................13/21

4-3. OSD Adjustments .............................14/21

5. Display power management ......17/21

Reducing power consumption ..............17/21

6. Troubleshooting ..........................18/21

7. Specifications ..............................21/21

L19T
19" TFT LCD Color Monitor

1. Introduction

2. Safety Information

1/21

BACK

NEXT

This manual contains instructions for installing and operating ImageQuest L19T.

ImageQuest L19T is a highly ergonomic color display unit.

• 19" viewable SXGA LCD

• High quality screen re-scaling capability

• 100-240V AC input voltage

• VESA DPMS (Display Power Management Signaling)

• VESA DDC1/2B compatibility

• Advanced digital On-Screen-Display controls

• Fast and accurate auto adjustment

• Most advanced image scaling

• Supporting VESA Flat Panel Monitor Physical Mounting Interface

This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind
the following:

Do not place anything wet on the monitor or the power
cord. Never cover the ventilation openings with any
material and never touch them with metallic or
inflammable materials.

L19T
19" TFT LCD Color Monitor

2/21

BACK

NEXT

Avoid operating the monitor in extreme heat,
humidity or areas affected by dust.
Temperature : 5~35°C
Humidity : 30~80RH

Be sure to turn the monitor off before plugging the
power cord into the socket. Make sure that the power
cord and the other cords are securely and rightly
connected.

Overloaded AC outlets and extension cords are
dangerous, as are frayed power cords and broken
plugs, which may cause electric shock or fire. Call
your service technician for replacement.

Do not use sharp tools such as a pin or a pencil near
the monitor, as they may scratch the LCD surface.

Do not use a solvent, such as benzene, to clean the
monitor, as it will damage the LCD surface.

L19T
19" TFT LCD Color Monitor

Cleaning and Maintenance

• To avoid risk of electric shock, do not disassemble the display unit cabinet. The
unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.

• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.

• Do not wipe the screen with a cloth or sponge that could scratch the surface.

• To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.

• If the instructions above do not help in removing stains, contact an authorized
service agent.

3/21

BACK

NEXT

L19T
19" TFT LCD Color Monitor

4/21

BACK

NEXT

The following items should be found in the packaging.

Above power cord can be changed upon different voltage areas. Please
contact your dealer if anything is missing or damaged.

Other power cord except the cord packed in the product or longer than 3m
may affect EMC of the product in operating condition.

3. Installing the
monitor

3-1. Packing List

!

UK

America/Canada

Japan

Australia

Korea

Europe

South Africa

Power Cord

Signal Cable

Audio Cable

Compact Disc

L19T
19" TFT LCD Color Monitor

5/21

BACK

NEXT

3-2. Selecting a suitable

location

3-3. Connecting the

monitor

• Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.

• Place the monitor in a position where no light shines directly onto or is
reflected on the screen.

• To reduce eye strain, avoid installing the display unit against a bright
background such as a window.

• Position the monitor so that the top of the screen is no higher than eye level.

• Position the monitor directly in front of you at a comfortable reading distance

(around 45 to 90cm)

Before you start cabling your monitor, check that the
power is off on all units. To avoid any possibility of
electric shock, always connect your equipment to
properly earthed outlets.

1. Insert the other 15-pin signal cable connector into the 15-pin VGA connection
on your computer and screw it down.

2. Plug the power cord connection to connection on the monitor.

3. Plug the other end of the power cord to your computer's main supply or to a
100V-240V earthed electrical outlet.

4. Turn on the monitor using the power switch and check that the power LED is
on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of
this guide.

!!

L19T
19" TFT LCD Color Monitor

6/21

BACK

NEXT

5. Turn on the power to the computer. The picture will appear within about 10
seconds. Adjust the picture to obtain optimum picture quality. See section
Adjusting the picture in this guide for more information.

Speaker

L19T
19" TFT LCD Color Monitor

• Audio system

7/21

BACK

NEXT

!!

This monitor has an audio system including two micro loudspeakers. Each of two
micro loudspeakers has an 2Wrms (typ.) output power. This system also supports a
headphone output jack.

This system has been tuned to get a best tone quality which an audio input
level is under 300mVrms. if the input level is more than 600mVp-p, you must
tune down the audio input as the audio output tone may be distorted.

When this monitor is turned on, audio is always set up as off mode. Please use
AUDIO direct access button on the front cover or On Screen Display to put
audio on.

L19T
19" TFT LCD Color Monitor

8/21

BACK

NEXT

3-4. Setting the refresh

rate

Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000.

1. Go to the configuration window(Start-Settings-Configuration window).

2. Double click on the ‘Display’ icon.

3. Click on the ‘Settings’ tab.

4. Click on the ‘Advanced’ button.

5. Click on ‘Adapter’ and select 60Hz from the list.

6. Click on ‘Apply’ to accept the selected value.

Power Switch

LED Indicator

L19T
19" TFT LCD Color Monitor

Preset Timing Table

If the signal from the system doesn't equal to the preset timing mode, adjust
the mode with reference to the user guide of videocard because the screen
may not be displayed.

The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz.

9/21

BACK

NEXT

!

No.

1
2
3
4
5
6
7
8
9

10
11
12
13
14

Resolution

720

x

400

640

x

480

640

x

480

800

x

600

800

x

600

800

x

600

800

x

600

832

x

624

1024

x

768

1024

x

768

1024

x

768

1152

x

864

1280

x

1024

1280

x

1024

Horizontal Frequency

31.5 KHz

31.5 KHz

37.5 KHz

35.2 KHz

37.9 KHz

48.1 KHz

46.9 KHz

49.7 KHz

48.4 KHz

56.5 KHz

60.0 KHz

67.5 KHz

63.9 KHz

80.0 KHz

Refresh rate

70 Hz
60 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
75 Hz
60 Hz
70 Hz
75 Hz
75 Hz
60 Hz
75 Hz