Hyundai HSH-I073NBE, HSH-I093NBE, HSH-I123NBE, HSH-I183NBE, HSH-I243NBE Service Manual

HYUNDAI

WALL MOUNTED SPLIT-TYPE AIR CONDITIONERS

SERVICE MANUAL

Models

No.TE121023

HSH-I073NBE HSH-I093NBE

HSH-I123NBE HSH-I183NBE HSH-I243NBE

IMPORTANT NOTICE

This service manual is intended for use by individuals possessing adequate backgrounds of electrical, electronic and mechanical experience. Any attempt to repair the appliance may result in personal injury and property damage. The manufacturer or seller cannot be responsible for the interpretation of this information, nor can it assume any liability in connection with its use.

The information, specifications and parameter are subject to change due to technical modification or improvement without any prior notice. The accurate specifications are presented on the nameplate label.

How to order spare parts

To have your order filled promptly and correctly, please furnish the following information:

1. Model No. with Indoor or Outdoor

2. No. in the Explosion View

3. Part Name

4. The quantity you ordered

TCL Air Conditioner Service ManualTCL Air Conditioner Service ManualTCL Air Conditioner Service Manual

Air Conditioner Service Manual

Summary and features

Panel BM-S For fixed t

ype

Air Conditioner Service Manual

Panel BM-WPanel Z

12K Outdoor Unit7K/9K Outdoor Unit

I：HSH-I123NBE O：HRH-I123NBE

18K Outdoor Unit 24K Outdoor Unit

Remarks

Fixed type

（220~240V/50Hz)

I：HSH-I183NBE O：HRH-I183NBE I：HSH-I243NBE O：HRH-I243NBE

I: HSH-L093NDC-W O: HRH-L093NDC-W

DC inverter

（220~240V/50Hz)

Models

For DC inverter

I: HSH-L123NDC-W O: HRH-L123NDC-W

I: HSH-L093NDC-S O: HRH-L093NDC-S I: HSH-L123NDC-S O: HRH-L123NDC-S

I：HSH-I073NBE O：HRH-I073NBE I：HSH-I093NBE O：HRH-I093NBE

COOLING HEATING

2200 2250

890 810

400 430

1300/1200/1100 1250/1150/1050

Technical specifications

Air Conditioner Service Manual

Net Weight /Gross Weight (kg)

/7.8

Sound Power Level dB (A) (H/M/L)

Dimension of Package (L/W/H) ( mm)

805×305×255

Dimension (W/H/D) ( mm)

Row-Fin Gap(mm) 1-1.5

Sound Pressure Level dB (A) (H/M/L)

Fuse (A)

PCB 3.15A

Output of Swing Motor (W)

Swing Motor Model

GBJDJ-01

Coil length (l) X height (H) Xcoil width (L)

544*231*12.7

Ф7

Evaporator Hydrophilic aluminum fin-copper tube

Diameter-Length (mm) φ88.8×545

Indoorunit

Model of Indoor Unit HSH-I073NBE

Fan Type Cross flow fan

Fan Motor RLA(A) 0.16

Fan Motor Capacitor (μF) 1.5

Pipe Diameter (mm)

Input of Heater (W) /

Fan Motor Speed (r/min) (SH/H/M/L) Output of Fan Motor (W) 12

Air Flow Volume (m3/h)

Rated Frequency

Energy Class A/A

EER / C.O.P (W/W)

Dehumidifying Volume (l/h) 0.6

Total Capacity (W) Power Input (W) Rated Input (W) Rated Current (A)

Model HSH-I073NBE/I HRH-I073NBE/O

50Hz

Function Rated Voltage 220-240V

Product Code /

Air Conditioner Service Manual

Length (m)

Max Distance

Height (m)

Connection

Pipe

Length (m) 3

Dimension of Package (L/W/H)( mm) 745x550x353

Gas Pipe (mm) Ф9.52(3/8)

Outer Diameter

Liquid Pipe (mm) Φ6(1/4'')

Gas additional charge(g/m) 20

Refrigerant Charge (kg) 440

Net Weight /Gross Weight (kg) 23.3/25.3

Moisture Protection IP24

Dimension (W/H/D) ( mm) 600x500x232

Sound Power Level dB (A) (H/M/L)

Sound Pressure Level dB (A) (H/M/L) 50

Permissible Excessive Operating Pressure fo

theSuction Side(MPa)

0.65

Permissible Excessive Operating Pressure for the Discharge Side(MPa)

2.8

Air Flow Volume of Outdoor Unit(m3/h) 1415

Isolation I

Climate Type T1

Defrosting Method Auto defrost

Fan Diameter (mm) φ324×119

Fan Type Axial fan

Rows-Fin Gap(mm) 1-1.8

Fan Motor Capacitor (μF) 2

Fan Motor RLA(A) 0.37

Output of Fan Motor (W) 25

Fan Motor Speed (rpm) 895

Coil length (l) X height (H)Xcoil width (L) 621*462*12.7

Overload Protector B145-140-141E

Pipe Diameter (mm) Φ7

Condenser Hydrophilic aluminum fin-copper tube

Working Temp Range (ºC) 18-43

Starting Method Capacitor

Throttling Method Capillary

QING'AN

Compressor Power Input(W) 780±5%

Compressor RLA(A) 3.8

L.R.A. (A) 19

Outdoorunit

Model of Outdoor Unit HRH-I073NBE

Compressor Type Rotary

Compressor Model YZG-E22RY2

Compressor Manufacturer/trademark

Product Code /

COOLING HEATING

2700 2780

1085 1000

430 430

1150/1050/950 1150/1050/950

Air Conditioner Service Manmual

Dimension (W/H/D) ( mm)

718x240x180

Net Weight /Gross Weight (kg)

6.2/7.8

Dimension of Package (L/W/H) ( mm)

805×305×255

Coil length (l) X height (H) Xcoil width (L)

544*231*12.7

Sound Power Level dB (A) (H/M/L)

Sound Pressure Level dB (A) (H/M/L) 36/34/32

Fuse (A)

PCB 3.15A

Output of Swing Motor (W)

Swing Motor Model

GBJDJ-01

0.16

Row-Fin Gap(mm) 1-1.5

Pipe Diameter (mm) Ф7

Evaporator Hydrophilic aluminum fin-copper tube

EER / C.O.P (W/W)

Fan Motor Capacitor (μF) 1.5

Input of Heater (W) /

Fan Motor Speed (r/min) (SH/H/M/L) Output of Fan Motor (W) 12

Indoorunit

Model of Indoor Unit HSH-I093NBE

Energy Class A/A

Diameter-Length (mm) φ88.8×545

Fan Type Cross flow fan

Fan Motor RLA(A)

Product Code /

1.0

Total Capacity (W) Power Input (W) Rated Input (W) Rated Current (A) Air Flow Volume (m3/h) Dehumidifying Volume (l/h)

Rated Frequency 50Hz

Function Rated Voltage 220-240V

Model HSH-I093NBE/I HRH-I093NBE/O

Air Conditioner Service Manmual

Connection

Pipe

Length (m)

Max Distance

Height (m)

Net Weight /Gross Weight (kg) 23.4/25.5

Gas Pipe (mm) Ф9.52(3/8)

Outer Diameter

Liquid Pipe (mm) Φ6(1/4'')

Gas additional charge(g/m) 20

Length (m) 3

Refrigerant Charge (kg) 470

Permissible Excessive

perating Pressure fo

theDischarge Side(MPa)

2.8

Dimension of Package (L/W/H)( mm) 745x550x353

Dimension (W/H/D) ( mm) 600x500x232

Sound Power Level dB (A) (H/M/L)

Sound Pressure Level dB (A) (H/M/L) 52

Permissible Excessive Operating Pressure for theSuction Side(MPa)

0.65

Fan Type Axial fan

Moisture Protection IP24

Isolation I

Climate Type T1

Defrosting Method Auto defrost

Fan Diameter (mm) φ324×119

Coil length (l) X height (H)Xcoil width (L) 621*462*12.7

Air Flow Volume of Outdoor Unit(m3/h) 1415

Fan Motor Capacitor (μF) 2

Fan Motor RLA(A) 0.37

Output of Fan Motor (W) 25

Fan Motor Speed (rpm) 895

Throttling Method Capillary

Rows-Fin Gap(mm) 1-1.8

Pipe Diameter (mm) Φ7

Condenser Hydrophilic aluminum fin-copper tube

Working Temp Range (ºC) 18-43

Starting Method Capacitor

B175-145B-141C

Compressor Power Input(W) 930±5%

Compressor RLA(A) 4.3

Outdoorunit

Model of Outdoor Unit HRH-I093NBE

L.R.A. (A) 21

Compressor Type Rotary

Compressor Model 44A233AJ-FEKC

Overload Protector

Compressor Manufacturer/trademark RECHI

Product Code /

COOLING HEATING

3520 3660

1420 1310

530 530

1270/1170/1000 1250/1150/1000

Air Conditioner Service Manmual

Net Weight /Gross Weight (kg)

7/8.7

855×305×255

Dimension (W/H/D) ( mm)

770x240x180

Sound Power Level dB (A) (H/M/L)

39/36/34

Fuse (A)

PCB 3.15A

Output of Swing Motor (W)

GBJDJ-01

Coil length (l) X height (H) Xcoil width (L)

604*231*25.4

Row-Fin Gap(mm) 2-1.8

Ф7

Evaporator Hydrophilic aluminum fin-copper tube

Diameter-Length (mm) φ90.8×602

HSH-I123NBE

Fan Type Cross flow fan

Fan Motor RLA(A) 0.16

Fan Motor Capacitor (μF) 1.5

Fan Motor Speed (r/min) (SH/H/M/L) Output of Fan Motor (W) 12

Rated Input (W) Rated Current (A) Air Flow Volume (m3/h)

Input of Heater (W)

Indoorunit

Model of Indoor Unit

Pipe Diameter (mm)

Swing Motor Model

Sound Pressure Level dB (A) (H/M/L)

Dimension of Package (L/W/H) ( mm)

Energy Class A/A

EER / C.O.P (W/W)

Dehumidifying Volume (l/h)

Rated Frequency 50Hz

Function Rated Voltage 220-240V

1.5

Total Capacity (W) Power Input (W)

Product Code /

Model HSH-I123NBE/I HRH-I123NBE/O

Air Conditioner Service Manmual

Length (m) 3 Gas additional charge(g/m) 20

Length (m) 15

Max Distance

Height (m) 5

Connection

Pipe

Gas Pipe (mm) Ф9.52(3/8)

Outer Diameter

Liquid Pipe (mm) Φ6(1/4'')

Sound Pressure Level dB (A) (H/M/L) 55

Refrigerant Charge (kg) 670

Net Weight /Gross Weight (kg) 29.7/32.8

Dimension of Package (L/W/H)( mm) 803*590*361

Dimension (W/H/D) ( mm) 700x552x256

Sound Power Level dB (A) (H/M/L)

Defrosting Method Auto defrost

Permissible Excessive

perating Pressure fo

theSuction Side(MPa)

0.7

Permissible Excessive

perating Pressure fo

theDischarge Side(MPa)

2.9

Moisture Protection IP24

Isolation I

Climate Type T1

Output of Fan Motor (W) 31

Fan Diameter (mm) φ401×119

Fan Type Axial fan

Air Flow Volume of Outdoor Unit(m3/h) 2040

Fan Motor Capacitor (μF) 2.5

Fan Motor RLA(A) 0.45

Working Temp Range (ºC) 18-43

Fan Motor Speed (rpm) 860

Coil length (l) X height (H)Xcoil width (L) 711*504*12.7

Rows-Fin Gap(mm) 1-1.5

Pipe Diameter (mm) Φ7

Condenser Hydrophilic aluminum fin-copper tube

Starting Method Capacitor

Throttling Method Capillary

Overload Protector B290-150B-241E

Compressor Type Rotary

Compressor Model 48A313PM-55KF

Compressor Manufacturer/trademark RECHI

Product Code /

Outdoorunit

Model of Outdoor Unit HRH-I123NBE

Compressor Power Input(W) 1245±5%

Compressor RLA(A) 5.8

L.R.A. (A)

COOLING HEATING

5280 5420

2135 1950

760 780

1300/1220/1150 1250/1150/1050

Air Conditioner Service Manmual

Dimension (W/H/D) ( mm)

900x280x202

Net Weight /Gross Weight (kg)

9.3/11.8

Dimension of Package (L/W/H) ( mm)

985x365x298

Coil length (l) X height (H) Xcoil width (L)

705*315*25.4

Sound Power Level dB (A) (H/M/L)

Sound Pressure Level dB (A) (H/M/L) 48/46/44

Fuse (A)

PCB 3.15A

Output of Swing Motor (W)

Swing Motor Model GBJDJ-01（L）

0.30

Row-Fin Gap(mm) 2-1.6

Pipe Diameter (mm) Ф7

Evaporator Hydrophilic aluminum fin-copper tube

EER / C.O.P (W/W)

Fan Motor Capacitor (μF) 1.5

Input of Heater (W) /

Fan Motor Speed (r/min) (SH/H/M/L) Output of Fan Motor (W) 23

Indoorunit

Model of Indoor Unit HSH-I183NBE

Energy Class A/A

Diameter-Length (mm) φ94×709

Fan Type Cross flow fan

Fan Motor RLA(A)

Total Capacity (W) Power Input (W) Rated Input (W) Rated Current (A) Air Flow Volume (m3/h) Dehumidifying Volume (l/h)

Rated Frequency 50Hz

Function Rated Voltage 220-240V

Product Code /

Model HSH-I183NBE/I HRH-I183NBE/O

Air Conditioner Service Manmual

Connection

Pipe

Length (m) 15

Max Distance

Height (m) 5

Net Weight /Gross Weight (kg) 36.5/39.6

Gas Pipe (mm) Φ12(1/2'')

Outer Diameter

Liquid Pipe (mm) Φ6(1/4'')

Gas additional charge(g/m) 30

Length (m) 4

Refrigerant Charge (kg) 1050

Permissible Excessive Operating Pressure fo

theDischarge Side(MPa)

Dimension of Package (L/W/H)( mm) 863*590*361

Dimension (W/H/D) ( mm) 760x552x256

Sound Power Level dB (A) (H/M/L)

Sound Pressure Level dB (A) (H/M/L) 58

Permissible Excessive Operating Pressure fo

theSuction Side(MPa)

0.75

Fan Type Axial fan

Moisture Protection IP24

Isolation I

Climate Type T1

Defrosting Method Auto defrost

Fan Diameter (mm) φ409×132

Coil length (l) X height (H)Xcoil width (L) 768*510*19.05

Air Flow Volume of Outdoor Unit(m3/h) 2340

Fan Motor Capacitor (μF) 3

Fan Motor RLA(A) 0.47

Output of Fan Motor (W) 45

Fan Motor Speed (rpm) 850

Throttling Method Capillary

Rows-Fin Gap(mm) 1-1.5

Pipe Diameter (mm) Φ9.52

Condenser Hydrophilic aluminum fin-copper tube

Working Temp Range (ºC) 18-43

Starting Method Capacitor

IOL

Compressor Power Input(W) 1650

Compressor RLA(A) 7.7

Outdoorunit

Model of Outdoor Unit HRH-I183NBE

L.R.A. (A) 40

Compressor Type Rotary

Compressor Model ASH201SV-C8LU

Overload Protector

Compressor Manufacturer/trademark HIGHLY

Product Code /

COOLING HEATING

7030 7180

2830 2575

760 780

1350/1250/1150 1350/1250/1150

Air Conditioner Service Manmual

Net Weight /Gross Weight (kg)

9.3/12.2

985x365x298

Dimension (W/H/D) ( mm)

x280x202

Sound Power Level dB (A) (H/M/L)

48/46/44

Fuse (A)

PCB 3.15A

Output of Swing Motor (W)

GBJDJ-01（L）

Coil length (l) X height (H) Xcoil width (L)

705*315*25.4

Row-Fin Gap(mm) 2-1.4

Ф7

Evaporator Hydrophilic aluminum fin-copper tube

Diameter-Length (mm) φ94×709

HSH-I243NBE

Fan Type Cross flow fan

Fan Motor RLA(A) 0.30

Fan Motor Capacitor (μF) 1.5

Fan Motor Speed (r/min) (SH/H/M/L) Output of Fan Motor (W) 23

Rated Input (W) Rated Current (A) Air Flow Volume (m3/h)

Input of Heater (W)

Indoorunit

Model of Indoor Unit

Pipe Diameter (mm)

Swing Motor Model

Sound Pressure Level dB (A) (H/M/L)

Dimension of Package (L/W/H) ( mm)

Energy Class A/A

EER / C.O.P (W/W)

Dehumidifying Volume (l/h)

Rated Frequency 50Hz

Function Rated Voltage 220-240V

2.4

Total Capacity (W) Power Input (W)

Product Code /

Model HSH-I243NBE/I HRH-I243NBE/O

Air Conditioner Service Manmual

Length (m) 4 Gas additional charge(g/m) 30

Length (m) 15

Max Distance

Height (m) 5

Connection

Pipe

Gas Pipe (mm) Φ15.88(5/8'')

Outer Diameter

Liquid Pipe (mm) Φ9.52(3/8'')

Sound Pressure Level dB (A) (H/M/L) 60

Refrigerant Charge (kg) 1380

Net Weight /Gross Weight (kg) 50.2/54.3

Dimension of Package (L/W/H)( mm) 1037x705x433

Dimension (W/H/D) ( mm) 902x650x307

Sound Power Level dB (A) (H/M/L)

Defrosting Method Auto defrost

Permissible Excessive Operating Pressure fo

theSuction Side(MPa)

0.8

Permissible Excessive

perating Pressure fo

theDischarge Side(MPa)

Moisture Protection IP24

Isolation I

Climate Type T1

Output of Fan Motor (W) 95

Fan Diameter (mm) φ470×173

Fan Type Axial fan

Air Flow Volume of Outdoor Unit(m3/h) 3350

Fan Motor Capacitor (μF) 4

Fan Motor RLA(A) 0.92

Working Temp Range (ºC) 18-43

Fan Motor Speed (rpm) 850

Coil length (l) X height (H)Xcoil width (L) 901*609*19.05

Rows-Fin Gap(mm) 1-1.5

Pipe Diameter (mm) Φ9.52

Condenser Hydrophilic aluminum fin-copper tube

Starting Method Capacitor

Throttling Method Capillary

Overload Protector IOL

Compressor Type Rotary

Compressor Model ASH264SV-C8LU

Compressor Manufacturer/trademark HIGHLY

Product Code /

Outdoorunit

Model of Outdoor Unit HRH-I243NBE

Compressor Power Input(W) 2215

Compressor RLA(A) 10.3

L.R.A. (A)

COOLING HEATING

2703 (1110-3080) 2724 (1230-3810)

1050 1220

4.8 5.6

600 600

HSH-L093NDC-W HSH-L093NDC-S

1200/1050/900

Fuse (A)

PCB 3.15A

Net Weight /Gross Weight (kg)

8/10

Dimension of Package (L/W/H) ( mm)

885*366*278

Dimension (W/H/D) ( mm)

800*280*185

Sound Power Level dB (A) (H/M/L)

Sound Pressure Level dB (A) (H/M/L) 38/36/34

Evaporator Hydrophilic aluminum fin-copper tube

Output of Swing Motor (W)

Swing Motor Model

GBJDJ-01

Coil length (l) X height (H) Xcoil width (L)

657x315x25.4

Row-Fin Gap(mm) 2-1.5

Pipe Diameter (mm) Ф

EER / C.O.P (W/W)

Fan Motor Capacitor (μF) 1.5

Input of Heater (W) /

Fan Motor Speed (r/min) (SH/H/M/L) Output of Fan Motor (W) 18

Indoorunit

Model of Indoor Unit

Energy Class A/A

Diameter-Length (mm) φ98×622

Fan Type Cross flow fan

Fan Motor RLA(A) 0.23

0.8

Total Capacity (W) Power Input (W) Rated Input (W) Rated Current (A) Air Flow Volume (m3/h) Dehumidifying Volume (l/h)

Rated Frequency 50Hz

Function Rated Voltage 220-240V

Product Code /

Air Conditioner Service Manmual

Model HSH-L093NDC HRH-L093NDC

HRH-L093NDC-W HRH-L093NDC-S

Air Conditioner Service Manmual

Connection

Pipe

Length (m)

Max Distance

Height (m)

Net Weight /Gross Weight (kg) 32/36

Gas Pipe (mm) Ф9.52(3/8)

Outer Diameter

Liquid Pipe (mm) Φ6(1/4'')

Gas additional charge(g/m) 20

Length (m) 3

Refrigerant Charge (kg) 1002

ermiss

ible E

xcessive Operating Pressure fo

theDischarge Side(MPa)

4.5

Dimension of Package (L/W/H)( mm) 863x590x361

Dimension (W/H/D) ( mm) 760x552x256

Sound Power Level dB (A) (H/M/L)

Sound Pressure Level dB (A) (H/M/L) 52

Permissible Excessive

perating Pressure fo

theSuction Side(MPa)

1.9

Fan Type Axial fan

Moisture Protection IP25

Isolation I

Climate Type T1

Defrosting Method Auto defrost

Fan Diameter (mm) φ408×132

Coil length (l) X height (H)Xcoil width (L) 756x510x25.4

Air Flow Volume of Outdoor Unit(m3/h) 2340

Fan Motor Capacitor (μF) 2.5

Fan Motor RLA(A) 0.45

Output of Fan Motor (W) 31

Fan Motor Speed (rpm) 860

Throttling Method Capillary

Rows-Fin Gap(mm) 2-1.5

Pipe Diameter (mm) Φ7

Condenser Hydrophilic aluminum fin-copper tube

Working Temp Range (ºC) 18-44

Starting Method Capacitor

Compressor Power Input(W) 705±5%

Compressor RLA(A) 4.75±5%

Outdoorunit

Model of Outdoor Unit

L.R.A. (A) N.A

Compressor Type Rotary

Compressor Model DA89X1C-20FZ3

Overload Protector INT01L-4639

Compressor Manufacturer/trademark GMCC

Product Code /

COOLING HEATING

3503 (1520-3960) 4323 (1610-4840)

1350 /1700

6.1 /7.7

650 650

HSH-L123NDC-W

HSH-L123NDC-S

1280/1100/900 1250/1080/900

Air Conditioner Service Manmual

Net Weight /Gross Weight (kg)

8/10

Sound Power Level dB (A) (H/M/L)

Dimension of Package (L/W/H) ( mm)

885*366*278

Dimension (W/H/D) ( mm)

800*280*185

40/38/36

Fuse (A)

PCB 3.15A

Output of Swing Motor (W)

GBJDJ-01

Coil length (l) X height (H) Xcoil width (L)

657x315x25.4

Row-Fin Gap(mm) 2-1.5

Ф7

Evaporator Hydrophilic aluminum fin-copper tube

Diameter-Length (mm) φ98×622

Cross flow fan

Fan Motor RLA(A) 0.23

Fan Motor Capacitor (μF) 1.5

Fan Motor Speed (r/min) (SH/H/M/L) Output of Fan Motor (W) 18

Rated Input (W) Rated Current (A) Air Flow Volume (m3/h)

Input of Heater (W)

Indoorunit

Model of Indoor Unit

Fan Type

Pipe Diameter (mm)

Swing Motor Model

Sound Pressure Level dB (A) (H/M/L)

Energy Class A/C

EER / C.O.P (W/W)

Dehumidifying Volume (l/h)

Rated Frequency 50Hz

Function Rated Voltage 220-240V

Total Capacity (W) Power Input (W)

Product Code /

Model HSH-L123NDC HRH-L123NDC

HRH-L123NDC-W HRH-L123NDC-S

Length (m)

Max Distance

Height (m)

Gas Pipe (mm) Φ12(1/2'')

Outer Diameter

Liquid Pipe (mm) Φ6(1/4'')

Gas additional charge(g/m) 20

Connection

Pipe

Length (m) 3

Sound Pressure Level dB (A) (H/M/L) 55

Refrigerant Charge (kg) 1000

Net Weight /Gross Weight (kg) 32/36

Dimension of Package (L/W/H)( mm) 863x590x361

Dimension (W/H/D) ( mm) 760x552x256

Sound Power Level dB (A) (H/M/L)

Defrosting Method Auto defrost

Permissible Excessive Operating Pressure fo

theSuction Side(MPa)

1.9

ermiss

ible E

xcessive Operating Pressure fo

theDischarge Side(MPa)

4.5

Moisture Protection IP26

Isolation I

Climate Type T3

Output of Fan Motor (W) 30

Fan Diameter (mm) φ408×132

Fan Type Axial fan

Air Flow Volume of Outdoor Unit(m3/h) 2340

Fan Motor Capacitor (μF) 2.5

Fan Motor RLA(A) 0.45

Working Temp Range (ºC) 18-45

Fan Motor Speed (rpm) 900 /770/670

Coil length (l) X height (H)Xcoil width (L) 756x510x25.4

Rows-Fin Gap(mm) 2-1.5

Pipe Diameter (mm) Φ7

Condenser Hydrophilic aluminum fin-copper tube

L.R.A. (A) N.A

Starting Method Capacitor

Throttling Method Capillary

Overload Protector IOL

Compressor Power Input(W) 865±5%

Compressor RLA(A) 4.6±5%

Outdoorunit

Model of Outdoor Unit

Compressor Type Rotary

Compressor Model DA108M1C-81EZ8

Compressor Manufacturer/trademark GMCC

Product Code /

Air Conditioner Service Manmual

Louver

Pipes and Power

Air Conditioner Service Manual

Air Conditioner Service Manmual

Product Dimensions

Outdoor Unit

Indoor Unit

20 mm

400 mm

57 mm

J D

Unit: mm

Air Conditioner Service Manual

Capacity A B C D E F G H I J K

7K&9K 718 240 180 600 500 230 271 296 52 376 55

12K 770 240 180 700 552 256 290 328 48 439.2 55

18K 898 280 202 760 552 256 290 328 48 507.8 63

24K 898 280 202 902 650 307 349 399 65 753.5 63

Air Conditioner Service Manual

WIRING DIAGRAM

MODEL:HSH-I073NBE,HSH-I093NBE,HSH-I123NBE INDOOR UNIT:

OUTDOOR UNIT

Air Conditioner Service Manual

WIRING DIAGRAM

MODEL:HSH-I183NBE INDOOR UNIT:

OUTDOOR UNIT

Air Conditioner Service Manual

WIRING DIAGRAM

MODEL:HSH-I243NBE INDOOR UNIT:

OUTDOOR UNIT

Product Dimensions

Outdoor Unit

Indoor Unit

20 mm

400 mm

57 mm

J D

Unit: mm

Air Conditioner Service Manual

Capacity A B C D E F G H I J K

9K&12K 800 280 185 760 552 256 290 328 48 507.8 63

Air Conditioner Service Manual

WIRING DIAGRAM

MODEL: HSH-L093NDC-W,HSH-L093NDC-S INDOOR UNIT:

OUTDOOR UNIT

Air Conditioner Service Manual

WIRING DIAGRAM

MODEL: INDOOR UNIT:

OUTDOOR UNIT

Note: Each mode and relevant function will be further specified in following pages.

Remote controller

MODE button

ECO button

ON/OFF button

FAN SPEED button

TEMP UP button

TIMER button

SLEEP button

TEMP DOWN button

To select the mode of operation.

In cooling mode,press this button ,the temperature will increase 2 on the base of setting temperature: In heating mode, press this button, the temperature will decrease 2 on the base of setting temperature.

To switch the conditioner on and off.

To select the fan speed of auto/low/mid/high.

To set automatic switching-on/off.

Increase the temperature or time by 1 unit.

To activate the function SLEEP .

Decrease the temperature or time by 1 unit.

Air Conditioner Service Manual

Operation Details

Remote Control

The remote controller is not presetting as Cooling Only Air Conditioner or Heat Pump by manufacturer. Each time after the remote controller replace batteries or is energized, the arrowhead will flashes on the front of

Heat or Cool on LCD of the remote controller. User can preset the remote controller type depending on the air conditioner type you have purchased as follows: Press any button when the arrowhead flashes on the front of Cool , Cooling Only is set. Press any button when the arrowhead flashes on the front of Heat , Heat Pump is set. If you don t press any button within 10 seconds, the remote controller is preset as Heat Pump automatically.

Note :

If the air conditioner you purchased is a Cooling Only one, but you preset the remote controller as Heat Pump, it doesn t bring any matter. But if the air conditioner you purchased is a Heat Pump one, and you preset the remote controller as Cooling Only, then you CAN NOT preset the Heating operation with the remote controller.

4 5

OFF

AUTOQUIET POWERFUL

hr DELAY

DRY

FAN

HEAT

TIMER

HEALTHY

AIR SWING

FAN SPEED

COOL

FEEL

ON/OFF

MODE TIMER

FAN SPEED SUPER ECO

ANTI-MILDEW

SWING SLEEP HEALTHY

DISPLAY RESET

SUPER button

In cooling mode, press this button, the unit will give the maximum cooling temperature with 16

In heating mode, press this button, the unit will give the maximum heating temperature with 31 .

SWING button

To activate or deactivate of the movement of the

DEFLECTORS .

DISPLAY button

To LED display (if present)switch on/off the .

HEALTHY button

To switch - on /off HEALTHY funtion.It is a button

which controls the ionizer or plasma generator only for inverter type.

RESET button

To restart REMOTE CONTROL.

Air Conditioner Service Manual

Electronic controller:

1.Automatic mode

1) Initial RT determines the working mode and ST,the mode is determined effective only once unless

A/C shut-down then re-started. If from other modes switches to autoamatic mode (including mode

conversion after shutdown), it should be that the compress stop more than 3 min then temperature

judgement and automatic mode are conducted (it can conduct immediately from fan mode switched

to automatic, the indoor fan stops, three minutes later the response is made and start up). Within 3

min, the output as: Showing the room temperature, indoor fans starts (or anti-cold airflow), the

outdoor fan stops;

2) With memory controller, once being turned off or in case of an accidently power cut, the A/C is able

to retain and restore the original mode when being turned on or the power supply is resumed, if the

auto restart function activated. power-down after power-on; while if the auto restart fundction isn’t

activated, the A/C enters standby state.

Heat pump

Mode Initial RT Initial ST

Cooling

RT≥26℃ 23℃

Dehumifying

26℃＞RT≥20℃ 18℃

Heating

RT＜20℃ 23℃

Cooling-only

Mode Initial RT Initial ST

Cooling

RT≥26℃ 23℃

Dehumifying

26℃＞RT≥20℃ 18℃

Ventilating

RT＜20℃ －

Under automatic mode (including from automatic converted into dehumidifying Dry mode), when the

temperature up and down signals from the remote controller is received, the setting temperature ST adjusts correspondingly to the current room temperature plus or minus 1℃, the automatic regulating temperature range is ± 2℃.

2．Cooling mode

1) The control of the compressor a. When RT－ST≥1℃，the compressor is running. b. When RT－ST＜－1℃，the compressor is off. c. When －1℃≤RT－ST＜1℃, the compressor keeps its original state.

2) Outdoor fan motor and the compressor run simultaneously (except for defrosting).

3) The control of indoor fan motor:

a. Indoor fan motor can operate by automatic, low, middle, and high airflow speed circularly. b. Indoor fan motor’s the automatic airflow speed control Indoor fan motor can operate by automatic，

as shown in Figure 1:

Mid

RT－ST 1℃ 2℃ 4℃

Figure 1 Cooling automatic airflow

When the temperature changes lead to changes in airflow speed, the switch can only be made

orderly, and every grade of air flow speed runs 1 minute at least.

Air Conditioner Service Manual

3, Dry mode

running into this mode, the Air cond. firstly operates for 3 minutes according to cooling mode (set

temperature is 7℃) , and then takes the detected backflow air temperature minus 2℃ as a new set

temperature (the minimum value of 5℃) and runs according to cooling mode, indoor fan operates at

low-speed, at this moment the setting operation of Fan speed is invalid but Swing is adjustable.

4. Heating mode

On the Heating mode, the room temperature is repaired. After repaired, the room temperature

display on the LED CRT=RT-3℃.

1) The control of the compressor a. When ST－CRT≥1℃，the compressor is running. b. When ST－CRT＜-1℃，the compressor is off. c. When -1℃≤ST－CRT＜1℃, the compressor keeps its original state

2) Outdoor fan motor and the compressor run simultaneously (except for defrosting)

3) The control of indoor fan motor:

a. Indoor fan motor can operate by automatic, low, middle, and high airflow speed circularly. b. indoor fan motor’s the automatic airflow speed control Indoor fan motor can operate by automatic，

as shown in Figure 2:

Mid

ST－CRT 1℃ 2℃ 4℃

Figure 2 Heating automatic airflow

When the temperature changes lead to changes in airflow speed, the switch can only be made

orderly, and every grade of air flow speed runs 1 minute at least.

4) Vane motor control: run as set state.

5) 4-way valve control:

a. Under heating mode, the four-way valve maintains well-connected status (including the

compressor stops on set condition, but except for the defrosting process)

b. When the mode switches into the heating mode or start-up, four-way valves will open 5 Seconds

before the compressor starts; while the mode exits from the heating mode or turn off, the four-way

valve will close 2min after after the shut-down the compressor.

6) Defrosting function:

During defrosting, once mode switch, temperature setting signals received, and the buzzer and

display make response immediately, but the other operations won’t implemented until defrosting

finished;

During defrosting, the signals of on-off, timing, sleep, airflow speed ans swing will be responded, but

the airflow speed and swing should be in accordance with anti-cold air rules.

Except the above signal processing during defrosting, no other signals will be dealt with, but only a

loud buzz.

During de

frosting, electrical heating stops compulsively.

Defrosting enter and exit pragram: Option 1：with jumper JC

The condition of enter defrosting: run into defrosting once any of condition 1, 2, and 3 met.

Air Conditioner Service Manual

Condition 1：As shown in figure 3

Defination:

The followings are all required to meet: a. IPT1 settles for IPT1＝IPTmax－△IPT（8℃） b. t5≥50min（running time t5≥50min（the compressor runs cumulatively），t5 is removable，and could be less than t1） c. IPT＜40℃，and lasts 2min。

Running into defrosting on condition 1, the first running time of set defrosting is F (8min); after running

a defrosting cycle, the defrosting time should be determined and adjusted.

Figure 3

Condition 2: When running time is more than or equal to 120 min (compressor is running

accumulatively), the indoor temperature is less than 35 ° C for 2 min sustained. Running into

defrosting under condition 2, defrosting time set is 8 min.

Condition 3: after the compressor is operating for 20min continuously, the indoor temperature is less

than 23 ° C which is anti-cold wind temperature when the fan stops running(including temperature

droping when compressor operating, not including the compressor’s starting course), and the

machine runs into defrosting according to any one condiciton as below) Running into defrosting under

condition 3, defrosting time set is 10 min.

a) Running into the first defrosting in 20 min after start-up.

b) The interval from last defrosting equivalent to or more than 50 min (stopping the compressor or the

machine in standby is allowed in the meantime).

Option 2: No Jumper JC, and no OPT outdoor sensor

when the compressor runs for 45 min, if the indoor coil temperature is less than 40 ° C for 2 min, the

machine runs into defrosting, and lasts for 3min, otherwise when the compressor runs for 120 min,

the machine runs into defrosting automatically and last for 10 min.

Option 3: No jumper JC, but with OPT outdoor sensor

When heating, when the temperature of outdoor unit under heat-exchange is lower than E ° C (-4 ° C),

and the compressor runs for 45 min, then the machine runs into defrosting and last for 10 min.

Option 4. When heating, when the outdoor fan motor stopped but the compressor not stopped

+ 70 hidden pages

Hyundai HSH-I073NBE, HSH-I093NBE, HSH-I123NBE, HSH-I183NBE, HSH-I243NBE Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual