Hyundai H-LED24V16 Instruction Manual

H-LED24V16

		ТЕЛЕВИЗОР
		ЦВЕТНОГО ИЗОБРАЖЕНИЯ
	LED TV	ЖИДКОКРИСТАЛЛИЧЕСКИЙ
		(LCD)

Instruction manual

Руководство по эксплуатации

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents	2
Before you start	3
Utilization of the product	3
Important safeguards	3
Installation	4
Wall mounting	4
Stand installation	4
Connection	5
Connection	5
Outdoor antenna connection	5
Other connections	5
Operation	6
Control elements	6
Front panel	6
Back panel	6
Remote controller	7
Changing the battery	7
General operations	8
Teletext operations	8
OSD operation	8
Channel setting	9
Picture setting	9
Sound setting	10
Timer setting	10
Option setting	10
USB operation	11
General operatoins of file playback	11
General information	12
Troubleshooting	12
Causes of interference	12
Accessories	13
Specifications	13

2

Before you start

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Important safeguards

•Before connecting the AC power cord to the DC adapter outlet, make sure that the voltage designation of the DC adapter corresponds to the local electrical supply.

•Accessories include a DC adaptor STB120300. Do not use other adaptors with this unit.

•Please unplug the power cord from the AC outlet and contact a service center for repair

if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.

•This unit should only be connected to a wall socket having grounding.

•Always disconnect the power cord and antenna during a storm.

•Do not fix the power cord with a metal nail.

•Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periods of time.

•When unplugging the plug, always hold the wide slot, do not touch the metal part, and do not destroy, refit, twist, pull or roast the power cord.

•Please contact the service center immediately if you found that the core is

showed in the air or has been broken.

•Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.

•Never touch the antenna lie or power plug if it stars to thunder.

•Do not touch the power plug with wet hands.

•Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of nondesignated capacity may cause the fire due to the generation of heat.

•All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.

•Please use the accessories provided

by the manufacturer. Using inadequate accessories may result in accidents.

•Please adjust the product through the panel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.

•Over-press the panel may destroy the product.

•Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product.

3

Before you start

•Please place the product on a flat surface in a well-ventilated location. Keep it away from the burning-light, direct sunlight, vibration, high-temperature and humidity.

•Do not place any vase, potted plant, cup, medicine and any container with water on this product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.

•Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.

•Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.

•Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.

•Do not place the unit into closed space

of TV for better ventilation; it can reduce the product lifetime. Keep a space at least 10 cm at above, left and right of the TV.

•Please place all the signal cords behind of rear panel.

•Do not overexert or touch the panel when you convey the product. Do not transfer the LCD TV up or down display direction.

•Do not transport it with the power cord

or the connection cable connected. If you move this product with the power cord or the connection cable connected, the damaged power cord, connection cable or connection terminal may cause the fire, the electric shock or breakdown.

•2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it can be damaged.

•The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.

All images provided herein are schematic drawings and may differ from of real objects.

Installation

Wall mounting

For wall mounting the back panel of this unit is equipped with 4 screw holes (4 mm diameter, 100 mm horizontal spread distance x 100 mm vertical spread distance). A wall-mount bracket should be used for wall mounting (the bracket is not included and should be acquired separately). Manufacturer is not responsible for improper mounting resulting in damage of the unit.

Stand installation

Place the LED TV on a solid flat surface. Use soft material to place over the front screen to avoid any damage. Then put the slits of the stand onto the fixing elements in the lower part of the unit until a click and fix the two parts by four screws as shown below:

4

Connection

Connection

Antenna cable connector	TVRF antenna jack

75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω impedance converter to plug in antenna input terminal on the rear of the cabinet.

Other connections

•Connect a TV or CATV antenna to the antenna jack.

•Connect a video source to the Composite video input jack with RCA cable.

•Connect an audio source to the proper Audio input jacks (left and right).

•Connect the power cord to the DC adaptor, then connect the adapter to the DC power jack of this unit.

•Connect PC audio input to PC main unit with related audio cable in PC mode.

•When using the unit as a computer screen, connect the PC to the PC jack of the unit by the relevant cable.

•If the video source has a HDMI output jack, you can connect the signal to the unit by HDMI cable (not included).

•Component input is intended for receiving component video signal if connected to the component output of external signal source. To receive audio signal for component video, please use Left and Right audio inputs of this unit.

•Connect an external device (e.g., VCR-/ DVD-recorder) to the proper Audio/Video output jacks of this unit with AV RCA cable.

•Connect your headphones or earphones (not included) to the headphone socket of this unit. When headphones are connected, the sound output through the built-in speakers of this unit is mute.

•Coaxial output is intended for transmitting multi-channel sound to an external decoder (e.g. in 5.1-CH format). RCA cable should be used for connection.

5

Operation

Control elements

Front panel

		1.	CH+/- buttons
	1	2.	VOL+/- buttons
		3.	MENU button
		4.	TV/AV button
	2	5.	STANDBY button
		6.	IR sensor
	3	7.	Power indicator

4

TV/AV

5

6

7

Back panel

	8	8. RF antenna jack
		9. Right audio input RCA
	9	10.	Left audio input RCA
		11.	Composite video input
	10	12.	Component video input
	11	13.	Power input
		14.	USB port
		15.	HDMI input
	12	16.	PC (VGA) input
		17.	PC audio input
		18.	Video output
		19.	Left audio output
		20.	Right audio output
		21.	Headphone jack
		22.	Digital coaxial audio output

13

14

15

16

17

18

19

20

21

22

6

Operation

Remote controller (RC)

1

19

20

2

21 3 22

4

23

24

5

625

726

827

928

10

29

1130

1231

1332

1433

15

16	34
17
18	35

1.STANDBY button

2.Number buttons

3.ASPECT button

4.VOL+/VOLbutton

5.ENTER button/cursor buttons (LEFT/RIGHT/ UP/DOWN)

6.MENU button

7.P.MODE button

8.SOURCE button

9. button

10. button

11.HOLD button

12.TEXT button

13.SIZE button

14.INDEX button

15.FAV button

16.USB button

17.Green button

18.Red button

19.button

20.PC AUTO button

21. button

22.NICAM button

23.CH+/CHbuttons

24.DISPLAY button

25.EXIT button

26.S.MODE button 31.button

27. SLEEP button				32.	REVEAL button
28.			button	33.	SUBPAGE button
29.			button	34.	Yellow button
30.			button	35.	Blue button

Changing the battery

1.Remove the battery compartment cover on the back of the RC.

2.Insert two AAA batteries into the battery compartment making sure that the correct polarity is observed.

3.Install the cover back.

•The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.

•Take the battery out of the RC if it is not used for a long time.

•Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.

•Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.

7

Operation

General operations

•Press STANDBY button on the unit or on the RC to switch on the power. Press STANDBY button again to switch the unit into standby mode, the power indicator will be red. When the unit is on, the indicator will be off.

•Press VOLbutton repeatedly to decrease the volume; press VOL+ button repeatedly to increase the volume.

• Press to mute sound, press this button again or increase volume to resume sound.

•Press SLEEP button repeatedly to set the sleep time (from 10 to 240 min or off). When sleep time is set, press this button to display the time remaining until the auto turn off.

•Press NICAM button in TV mode repeatedly to switch between Nicam Stereo, Mono, Dual I and Dual II sound modes (can be unavailable for some channels).

•Press repeatedly TV/AV button on the unit or press SOURCE button on the RC, then press UP/DOWN cursor buttons to cycle through the available source list as follows: TV

-AV - YPbPr - VGA - HDMI - USB.

•Select the TV function mode. Press

CH-/CH+ buttons to select previous or next channels; or press number buttons to enter a channel number from 0 to 199 directly.

•Press RECALL () button on the RC to select from the present channel and the previously displayed channel.

•Press FAV button to display the Favourite channel list in TV mode (you should setup your favourite channels in Program Edit menu).

•Press DISPLAY button to display the preset TV channel play information.

•Press ASPECT button repeatedly to select an aspect ratio: 16:9/4:3/Panorama/Zoom1/ Zoom2. The set of available aspects can vary depending on the current signal source.

Teletext operations (option)

Select a TV channel in order to pick up the picture signal of Teletext. Teletext button functions are as follows:

TEXT: Press this button to enter into TEXT mode. Press this button again to enter mixed mode. Press the button again to return to the channel you are watching.

HOLD: Press this button to stop the move to the next page. Press this button again to cancel operation.

INDEX: Press this button to go to the index page.

SIZE: Press this button to enlarge the top part of the page. Press this button again to enlarge the bottom part of the page. Press this button third time to normal size text page view.

REVEAL: Press this button to reveal the cancelled information. Press this button again to cancel the information.

SUBPAGE: Press this button to select subpage. Input the number of sub-page and use numeric buttons in the format 0001 for sub page 1. The teletext will search for the sub page. Press SUBPAGE button again to exit the subpage mode.

Red/Green/Yellow/Blue buttons: Press these 4 color buttons to access directly to corresponding color page displayed at the lower parts of teletext screen.

OSD operation

1.Press MENU button to enter the setting menu displayed on the screen.

2.Press LEFT/RIGHT cursor buttons on the RC or VOL+/- buttons on the panel to select setting page.

3.Press DOWN cursor button or ENTER button on the RC or CH+ button on the panel to go to the parameter list.

4.Press UP/DOWN cursor buttons on the RC or CH+/- buttons on the panel to select a parameter to adjust.

5.Press cursor buttons on the RC or VOL+/- or CH+/- buttons on the panel to adjust the selected parameter.

6.Press MENU button to return to the previous menu page. Press EXIT button on the

8

Operation

RC to quit the menu.

Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.

Channel setting (only for TV source)

Auto scan

TV Manual tuning

Programme edit

CHANNEL

Move

Menu

Select

Exit

•Auto scan: press RIGHT button to start automatic search of available channels. To stop the process press MENU button.

•TV manual tuning: Press ENTER button to enter into manual tuning menu:

Storage to: select channel number to store

in.

Color System: select corresponding color system.

Sound System: select corresponding sound system.

Current Ch: select channel number. Search: press LEFT/RIGHT buttons; the

unit will search for next available channel downward or upward and save it under the current number.

Fine-tune: perform fine adjustment of the current frequency.

•Programme Edit: this item allows

you to sort TV programs according to your preferences. Enter into program edit menu:

Delete: Select the channel you want to delete. Press red button to delete the channel.

Rename: Highlight the needed channel. Press green button; then press UP/DOWN buttons to select a symbol. Press LEFT/RIGHT buttons to select the next symbol. Press green button to confirm.

Move: Highlight the needed channel. Press

yellow button; select the position to put the channel into. Press yellow button to confirm.

Skip: Highlight the needed channel. Press blue button; now this channel will be skipped when you select previous/next channels.

Favorite: Select the channel you want to edit. If this channel is your favorite channel, you can add the mark to the channel as your favorite channel by pressing button.

Picture setting

Picture mode

Contrast

Brightness

Color

PICTURE Sharpness

Tint

Move

Menu

Select

Exit

•Picture Mode: User/Standard/Dynamic/ Mild.

•Contrast

•Brightness

•Color

•Sharpness

•Tint: adjust the tone of color when your system is in NTSC.

•Color Temperature: Medium/Warm/Cool/ User.

•Red: Adjust the red level of the image.

•Green: Adjust the green level of the image.

•Blue: Adjust the blue level of the image.

•Noise Reduction: Digital noise reduction effect for reducing the video noise level: Off/ Low/Middle/High/Default.

•Aspect ratio: 16:9/4:3/Panorama/Zoom1/ Zoom2. The set of available aspects can vary depending on the current signal source.

•Screen setting (only for PC mode)

9