Hyundai C21F05120 Users Manual

www.hyundaiQ.com

Type No. C21F05120

ImageQuest F230

Perfectly Flat Color Monitor

NEXT

User’s Guide

U.S.A.

BACK

U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER

NOTE : This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

NEXT

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.

DECLARATION OF CONFORMITY

BACK

WE ImageQuest CO., LTD.

Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA

declare under our sole responsibility that the product:

Kind of equipment : COLOR MONITOR

Type-Designation : C21F05120

to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)

Safety : EN 60950 : 1992 + A1, A2, A3, A4 , A11
EMC : EN 55022 : 1998, EN 55024 : 1998

EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998
EN 61000-3-3 : 1995

following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.

NEXT

Accredited testlaboratory:

TÜV Rheinland

Am Grauen Stein

51105 Köln

KOREA / MAY 10, 2002 HONG KI, KIM

(Place and date of issue) (Name and signature of

authorized person)

Contents

BACK

F230

Perfectly Flat Color Monitor

NEXT

1. Introduction ...............................1/20

2. Safety Information ...................1/20

3. Installing the monitor ..............3/20

3-1. Packing List ....................................3/20

Fastening the swivel and tilt base ...

3-2.

3-3. Selecting a suitable location .........4/20

3-4. Connecting the monitor ................5/20

3-5. Setting the refresh rate.................8/20

Preset Timing Table.......................8/20

4. Adjusting the picture...............9/20

5. Display power management..16/20

6. Troubleshooting......................17/20

7. Specifications..........................20/20

4/20

4-1. Using the On Screen Display......10/20

4-2. Direct access buttons..................10/20

4-3. OSD Adjustments........................11/20

Reducing power consumption.........16/20

1. Introduction

2. Safety Information

BACK

F230

Perfectly Flat Color Monitor

NEXT

This manual contains instructions for installing and operating ImageQuest F230.

ImageQuest F230 is a highly ergonomic color display unit;

• 21” diagonal Flat(20” viewable) 0.25 mm dot pitch CDT

• Supporting high screen refresh rates and full scan flicker-free picture quality

• With On Screen Display menus for user control

• 100-240V AC input voltage

• VESA DPMS (Display Power Management Signaling)

• VESA DDC1/2B compatibility

When you set up and use your display unit, follow the safety instructions below.

• Do not use the display unit in humid environments like bathrooms, damp
cellars, swimming pools, etc.

• This equipment must be connected to an earthed outlet which is close to the
display unit and accessible in case you need to disconnect the display.

• Do not connect an extension cord.

• Never insert objects into the openings on the outside of the device as you can
come into contact with live electrical components. This can cause fire or give
strong electrical shocks.

• Slots in the cabinet are provided for ventilation. Do not block the ventilation
slots in the display unit cabinet.

• Do not under any circumstances open the display unit cabinet.

1/20

Cleaning and Maintenance

BACK

F230

Perfectly Flat Color Monitor

NEXT

• To avoid risk of electric shock, do not disassemble the display unit cabinet.
The unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.

• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.

• Do not wipe the screen with a cloth or sponge that could scratch the surface.

• To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.

• To clean display unit cabinet, use a cloth lightly dampended with a mild
detergent.

• During the transportation of the monitor, the swivel base has to be removed in
every case.

2/20

3. Installing the
monitor

3-1. Packing List

BACK

F230

Perfectly Flat Color Monitor

NEXT

The following items should be found in the packaging.

Monitor

Tilt and Swivel

Compact Disc

Above power cord can be changed upon different voltage areas. Please

!

contact your dealer if anything is missing or damaged.

Signal Cable

Power cord

3/20

3-2. Fastening the swivel

and tilt base

BACK

F230

Perfectly Flat Color Monitor

NEXT

• Place the base against the bottom of the monitor so that the base fasteners are
aligned with appropriate slots.

3-3. Selecting a suitable

location

• Push the base towards the front of the monitor until the latch locks into
position.

• Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.

• Place the monitor in a position where no light shines directly onto or is
reflected on the screen.

• To reduce eye strain, avoid installing the display unit against a bright
background such as a window.

• Position the monitor so that the top of the screen is no higher than eye level.

• Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)

4/20