Hyundai C17R07072, C17F06091 Users Manual

ImageFlat F791

Mutiscanning Color Monitor

User's Guide

www.hyundaiQ.com

U.S.A.

U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER

NOTE : This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.

DECLARATION OF CONFORMITY

WE HYUNDAI ImageQuest CO., LTD.

Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA

declare under our sole responsibility that the product:

Kind of equipment : COLOR MONITOR

T ype-Designation : C17F06091

to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)

Safety : EN60950 : 1992 + A1, A2, A3, A4
EMC : EN 55 022/1994, EN 50 082-1/1992

IEC 801-2/1991, IEC 801-3/1984, IEC 801-4/1988
EN 61000-3-2/1995, EN 61000-3-3/1995

following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.

Accredited testlaboratory:

TÜV Rheinland

Am Grauen Stein

51105 Köln

KOREA / MARC H .10, 2001 HONG KI, KIM

(Place and date of issue) (Name and signature of

authorized person)

Contents

F791

ImageFlat Color Monitor

1. Introduction ..............................1/19

2. Safety Information ...................1/19

3. Installing the monitor ..............3/19

3-1. Packing List ...................................3/19

Fastening the swivel and tilt base ..

3-2.

3-3. Selecting a suitable location ........4/19

3-4. Connecting the monitor ...............5/19

3-5. Setting the refresh rate ................7/19

Preset Timing Table ......................7/19

4. Adjusting the picture .....................8/19

4-1. Using the On Screen Display .......9/19

4-2. Direct access buttons ....................9/19

4-3. OSD Adjustments....................... 10/19

5. Display power management .......15/19

Reducing power consumption .........15/19

6. Troubleshooting ...........................16/19

7. Specifications ...............................19/19

4/19

1. Introduction

2. Safety Information

F791

ImageFlat Color Monitor

This manual contains instructions for installing and operating Hyundai
ImageFlat F791.
Hyundai ImageFlat F791 is a highly ergonomic color display unit;

• 17” diagonal Flat(16” viewable) 0.25mm dot pitch CDT

• Supporting high screen refresh rates and full scan flicker-free picture quality

• With On Screen Display menus for user control

• 100-240V AC input voltage

• VESA DPMS (Display Power Management Signaling)

• VESA DDC1/2B compatibility

When you set up and use your display unit, follow the safety instructions below.

• Do not use the display unit in humid environments like bathrooms, damp
cellars, swimming pools, etc.

• This equipment must be connected to an earthed outlet which is close to the
display unit and accessible in case you need to disconnect the display.

• Do not connect an extension cord.

• Never insert objects into the openings on the outside of the device as you can
come into contact with live electrical components. This can cause fire or give
strong electrical shocks.

• Slots in the cabinet are provided for ventilation. Do not block the ventilation
slots in the display unit cabinet.

• Do not under any circumstances open the display unit cabinet.

1/19

Cleaning and Maintenance

F791

ImageFlat Color Monitor

• To avoid risk of electric shock, do not disassemble the display unit cabinet.
The unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.

• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.

• Do not wipe the screen with a cloth or sponge that could scratch the surface.

• To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.

• To clean display unit cabinet, use a cloth lightly dampended with a mild
detergent.

• During the transportation of the monitor, the swivel base has to be removed in
every case.

2/19

UK

America/Canada

Japan

Australia

Korea

Europe

South Africa

3. Installing the monitor

3-1. Packing List

F791

ImageFlat Color Monitor

The following items should be found in the packaging.

Attached
Signal Cable

Tilt and Swivel

Above power cord can be changed upon different voltage areas. Please

!

contact your dealer if anything is missing or damaged.

Compact Disc

Monitor

Power cord

3/19