Hypercom IN-tact 1101 User Manual

Easy, secure IP connectivity.

IN-tact®1101

Product Data

The Hypercom IN-tact series of products are IP gateway devices that provide
protocol conversion and secure managed connections for dial terminals. The
IN-tact 1101 is ideal for multi-lane and retail environments. It allows you to
take advantage of a DSL, cable modem or VPN connection. You can rest
easy knowing your transactions will be secured with the latest SSL industry
standards

Key Features

• Easy to install

• Connects up to 16 Hypercom RS-485 LAN terminals

• Supports multiple hosts

• Conforms to industry standards for secure IP transactions

• Provides secure management via a standard Web browser

• Support PPP dial for use with external analog modems

• Supports SNMP for existing customer systems

• Enables T- and ICE

™

-series terminals to communicate over IP

Whether you're looking for a reliable payment terminal, innovative,
value-add technology, or a complete electronic transaction management
system, Hypercom can deliver. Our product portfolio ranges from basic
credit authorization to full transaction transport and more. Hypercom is
more than a one-stop shop for payment terminals, it's a provider of
complete, end-to-end transaction solutions that expand the possibilities
at the POS in ways that translate to greater profits.

www.hypercom.com

Easy, secure IP connectivity.

IN-tact®1101

Ease of Use

• Simple and intuitive Web management facility allows the device to be pre-configured
prior to delivery to the point of installation,saving time and training

• SNMP capabilities along with the Web interface allow remote upgrades

• Easy-to-install procedure allows devices to be delivered fully configured to customer
locations. This allows an end user to start using the IN-tact 1101 right out of the box,
without the need for additional programming or configuration.

Secure

• Industry-standard SSL connection to a remote SSL server ensures secure transactions
over the Internet

• Integrated Web server allows secure management via a standard Web browser

• SNMP services for use with existing customer-provided management systems

• Redundant TCP/IP and connection to backup host destinations.

Cost Savings

• Faster transaction times utilizing IP rather than dial

• Connects to existing legacy dial terminals or ATMs, extending product life, not time lost
training employees or learning a new device.

World Headquarters:

Hypercom Corporation | 2851 W. Kathleen Road, Phoenix, Arizona 85053, USA
Tel: [phone] | Fax: [phone] | Web: www.hypercom.com

Global Locations:

North America | Latin America | Asia/Pacific Rim | Europe | Middle East | Africa | Australia

Technical Specifications:

Protocols

• HLAN: RS-485/SDLC

• Ethernet LAN: TCP/IP, HTTP, SNMP and PPP

Power

• Input: 110/220, 50/60 Hz

• Output: 24 VDC, 1 A

Footprint

• 6.0 in x 8.0 in x 1.5 in/15.2 cm x 20.3 cm x 3.8 cm

Weight

• .9 lbs/0.41 kg

Environment

• Temperature: 0-40°C/32-104°F

• Humidity: Max 95% RH, non-condensing

• Altitude: 0-10,000 ft/0-3.048 meters

• Vibration: 0.03 in, maximum displacement to 0,05G
sine peak, 3 orthogonal axes, 5-500-5 Hz

Reliability

• 100,000 hours (MTBF calculated)

Certifications

• Certified to global and local standards including CE

© 2006 Hypercom Corporation, all rights reserved. Hypercom is a
registered trademark of Hypercom Corporation. The Hypercom logo is
a trademark of Hypercom Corporation. All other products or services
mentioned in this document are trademarks, service marks, registered
trademarks or registered service marks of their respective owners.
Product Specifications subject to change without notice.

940421-001, Rev D June 2006

This product includes software developed by the University of California, Berkeley and its contributors.

This product includes cryptographic software written by Eric Young ([e-mail])