One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
PRODUCT GROUP
REV.
ISSUE DATE
2010. 06. 16BTFT LCD
PAGE
PAGE
1
OF 32
A4(210 X 297)
A4(210 X 297)
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUPREVISSUE DATE
TFT LCD PRODUCTB2010. 06. 16
REVISION HISTORY
REV.ECN NO.DESCRIPTION OF CHANGES DATE PREPARED
0Initial Release10. 02. 24C.Y.CHO
Changed Sufrace Treatment
AE1005-F003
Rev. 0 : Glare coating
Æ Rev. A : Anti Glare Coating
10. 05. 18Y.K.Park
BE1006-F002
\UXGlGpGjOuUY]PG
MG11. User connector pin No. rectify
10. 06. 16M.S.LEE
SPEC. NUMBER
S864-1407
SPEC TITLE
HV121WX6-110 Product Specification
2
B2005-C001-C (2/3)A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
PAGE
OF 32
Global LCD Panel Exchange Center
NoItemPage
1.0General Description4
2.0Absolute Maximum Ratings6
www.panelook.com
PRODUCT GROUPREVISSUE DATE
TFT LCD PRODUCTB2010. 06. 16
Contents
3.0Electrical Specifications7
4.0Optical Specifications9
5.0Interface Connections14
6.0Signal Timing Specifications17
7.0Signal Timing Waveforms17
8.0Input Signals, Basic Display Colors & Gray Scale of Colors19
9.0Power Sequence20
10.0Mechanical Characteristics21
11.0Mechanical Drawing22
12.0Reliability Test24
13.0Handling & Cautions24
14.0Labels26
15.0Packing Information28
16.0EDID Table30
SPEC. NUMBER
S864-1407
B2005-C001-C (3/3)A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
SPEC TITLE
HV121WX6-110 Product Specification
3
www.panelook.com
PAGE
OF 33
Global LCD Panel Exchange Center
1.0 GENERAL DESCRIPTION
1.1 Introduction
HV121WX6-110 is a color active matrix TFT LCD module using amorphous silicon TFT's
(Thin Film Transistors) as an active switching devices. This module has a 12.1 inch
diagonally measured active area with WXGA resolutions (1280 horizontal by 800 vertical
pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in
vertical Stripe and this module can display 262,144 colors. The TFT-LCD panel used for this
module is a low reflection and higher color type.
www.panelook.com
PRODUCT GROUPREVISSUE DATE
TFT LCD PRODUCTB2010. 06. 16
LVDS
Input
Signal
Connector (CN
LVDS Rx
+
T/CON
Gate Driver
TFT LCD Panel
1
VDD
1
)
DC/DC
Gamma
Vcom
HVDD
VDIM
LED Driver
1.2 Features
z Thin and Light Weight
z 3.3 V Logic Power Supply
z 12V Back-light Power Supply
z 1 Channel Mini-LVDS Interface
z SMD LED (48EA) Array (Bottom Side/Horizontal Direction)
z 262,144 Colors
z Data Enable Signal Mode
z Side Mounting Frame
z Green Product (RoHS)
BACK LIGHT(Fluorescent Lamp)
Back Light (SMD LED Array)
Source Driver
1280 ശ800
CN2
SPEC. NUMBER
S864-1407
SPEC TITLE
HV121WX6-110 Product Specification
4
B2005-C001-C (3/3)A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
PAGE
OF 33
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUPREVISSUE DATE
TFT LCD PRODUCTB2010. 06. 16
1.3 Application
z Tablet PC (Wide type)
1.4 General Specifications
ParameterSpecificationUnitRemarks
Active area 261.12(H) ശ163.20(V)mm
Number of pixels 1280(H) ശ800(V)pixels
Pixel pitch 0.204(H) ശ0.204(V)mm
Pixel arrangementRGB Vertical Stripe
Display colors262,144colors
Display modeNormally Black
Outline dimension
276.8r0.3(H) ശ180.0r0.3(V) ശ6.6(D:Max.)
mmNote 1
Weight220(Typ.) ധ 10 (Min. / Max.)gNote 2
Back-lightSMD LED (48EA) Array
Note 1 : at PCB side
Note 2 : without digitizer
SPEC. NUMBER
S864-1407
SPEC TITLE
HV121WX6-110 Product Specification
5
B2005-C001-C (3/3)A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
PAGE
OF 33
Global LCD Panel Exchange Center
(
ఁ
)
(40,
)
(
)
(
)
PRODUCT GROUPREVISSUE DATE
TFT LCD PRODUCTB2010. 06. 16
2.0 ABSOLUTE MAXIMUM RATINGS
The followings are maximum values which, if exceed, may cause faulty operation or
damage to the unit.
ParameterSymbolMin.Max.UnitRemarks
www.panelook.com
Ta=25+/-2¶C
Logic Power Supply VoltageV
Logic Power Supply VoltageV
Back-light Power Supply Voltage HV
Back-light LED CurrentI
LED
Back-light LED Reverse VoltageV
Operating TemperatureT
Storage TemperatureT
DD
IN
DD
R
OP
SP
-0.34.0V
-0.3VDD+0.3V
-0.340V
-30mANote 1
-5V
0+50
-20+60
ଇ
ଇ
Note 1,
Note 2
Note 1. Ambient temperature vs allowable forward current are shown in the figure below.
Note 2. Temperature and relative humidity range are shown in the figure below.
90% RH Max. ( 40ఁTa)
Maximum wet - bulb temperature at 39 or less. ( > 40ఁ) No condensation.
100
90
90
80
60
Operating Range
40
20
Storage Range
5
-40 -20 0 20 40 60 80
SPEC. NUMBER
S864-1407
SPEC TITLE
HV121WX6-110 Product Specification
B2005-C001-C (3/3)A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
50, 50
60, 27
Temperature
PAGE
OF 33
6
www.panelook.com
Global LCD Panel Exchange Center
3.0 ELECTRICAL SPECIFICATIONS
3.1 Electrical Specifications
< Table 3. Electrical Specifications >
ParameterMin.Typ.Max.UnitRemarks
www.panelook.com
PRODUCT GROUPREVISSUE DATE
TFT LCD PRODUCTB2010. 06. 16
Logic Power Supply VoltageV
Logic Power Supply CurrentI
Back-light Power Supply VoltageHV
Back-light Power Supply CurrentI
HVDD
Back-light Power ConsumptionP
DD
DD
DD
BL
3.03.33.6VNote 1
-300470mANote 1
7.012.020VNote 2
-255305mANote 2, 3
-3.063.66WNote 2, 3
LED Driver’s Efficiencyഗ-82-%Note 2, 3
Back-light PWM FrequencyF
High Level PWM Signal VoltageV
Low Level PWM Signal VoltageV
PWMH
PWML
High Level Differential Input Signal V
Low Level Differential Input Signal V
Back-light LED Voltage /
Back-light LED Total Voltage
Back-light LED Current /
Back-light LED Total Current
V
/V
I
/I
PWM
IH
IL
LED
BL
LED
BL
200280350
2.13.35.0V
-00.6V
--+100mVVcm= 1.2V
-100--mV
-
-
3.1
/ 37.2
16.9
/ 67.6
3.5/
42.0
17.8/7
1.2
VNote 4
mANote 4
LED Bright control signal--5V
Life Time
Panel unit life time
Power Consumption
P
P
LED
P
total
12,000
50,000
D
-1.01.55WNote 1
--HrsBased on LED
--HrsWithout BL,PCB
-2.512.99WNote 4
-3.514.54WNote 1, 4
Notes : 1. The supply voltage is measured and specified at the interface connector of LCM.
The current draw and power consumption specified is for 3.3V at 25ଇ.
a) Typ : Window XP pattern, b) Max : Vertical Sub line pattern
2. The power supply voltage and current is measured and specified at the interface
connector of LCM including LED Driver.
3. Reference value, which is measured with LED Driver for 12V.
4. Reference value, which is measured without LED Driver.
5. Calculated value for reference (V
SPEC. NUMBER
S864-1407
SPEC TITLE
HV121WX6-110 Product Specification
LED
ശ I
Ý # of LEDs (48EA) ).
LED
7
PAGE
OF 33
B2005-C001-C (3/3)A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
3.2 PWM Duty Ratio vs Brightness
100
90
80
70
60
50
www.panelook.com
PRODUCT GROUPREVISSUE DATE
TFT LCD PRODUCTB2010. 06. 16
40
30
Relative Brightness (%)
20
10
0
0 102030405060708090100
Duty Ratio (%)
Notes :
In case of duty ratio 0%, LED can’t illuminate itself so this state is LED off.
In case of duty ratio 100%, the brightness of LED is maximum and the state is LED on.
SPEC. NUMBER
S864-1407
SPEC TITLE
HV121WX6-110 Product Specification
8
B2005-C001-C (3/3)A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
PAGE
OF 33
Global LCD Panel Exchange Center
4.0 OPTICAL SPECIFICATIONS
4.1 Overview
The test of optical specifications shall be measured in a dark room (ambient luminance d 1
lux and temperature = 25r2ଇ) with the equipment of Luminance meter system (Goniometer
system and TOPCON BM-5A) and test unit shall be located at an approximate distance
50cm from the LCD surface at a viewing angle of ഘ and equal to 0q. We refer to ഘ
(=ഘ3 ) as the 3 o’clock direction (the “right”), ഘ
(“upward”), ഘ
o’clock direction (“bottom”). While scanning ഘ and/or Ø, the center of the measuring spot on
the Display surface shall stay fixed. The backlight should be operating for 30 minutes prior to
measurement. V
o’clock.
(= ഘ9 ) as the 9 o’clock direction (“left”) and ഘ
Ø=180
shall be 3.3+/- 0.3V at 25qC. Optimum viewing angle direction is 6
DD
www.panelook.com
PRODUCT GROUPREVISSUE DATE
TFT LCD PRODUCTB2010. 06. 16
Ø=0
(= ഘ12 ) as the 12 o’clock direction
Ø=90
(= ഘ6 ) as the 6
Ø=270
4.2 Optical Specifications
ParameterSymbolConditionMin.Typ.Max.UnitRemarks
Horizontal
Viewing Angle
range
Vertical
Luminance Contrast ratioCR
Luminance of
White
White
Luminance
uniformity
White Chromaticity
Reproduction
of color
Response
Time
Cross TalkCT
5 PointsY
5 PointsY580--
13 PointsY1360--
Red
Green
Blue
Total
(T
<Table 4. Optical Specifications>
ԭ
3
ԭ
9
ԭ
12
ԭ
6
w
W
x
W
y
R
x
R
y
G
x
G
y
B
x
B
y
r+Td
)
CR > 10
ԭ = 0q
ԭ = 0q
ԭ = 0q
ԭ = 0q
Ta= 25q C
ԭ = 0q
ԭ = 0q
-8990Deg.
-8990Deg.
-8990Deg.
-8990Deg.
450600-Note 2
240300-cd/m
0.273
0.288
0.499 0.539 0.579
0.306 0.346 0.386
0.299 0.339 0.379
0.522 0.562 0.602
0.108 0.148 0.188
0.055 0.095 0.135
-25-msNote 6
--2.0%Note 7
0.313
0.329
0.353
0.368
%
Note 1
2
Note 4
Note 5
Note 3
SPEC. NUMBER
S864-1407
SPEC TITLE
HV121WX6-110 Product Specification
9
B2005-C001-C (3/3)A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
PAGE
OF 33
Global LCD Panel Exchange Center
Notes :
1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing
angles are determined for the horizontal or 3, 9 o’clock direction and the vertical or 6,
12 o’clock direction with respect to the optical axis which is normal to the LCD surface
(see Figure1).
2. Contrast measurements shall be made at viewing angle of ഀ= 0 and at the center of
the LCD surface. Luminance shall be measured with all pixels in the view field set first
to white, then to the dark (black) state (see Figure1). Luminance Contrast Ratio (CR) is
defined mathematically as CR = Luminance when displaying a white raster / Luminance
when displaying a black raster.
www.panelook.com
PRODUCT GROUPREVISSUE DATE
TFT LCD PRODUCTB2010. 06. 16
3. Reference only / Standard Front Surface Treatment Measured with green cover glass.
The color chromaticity coordinates specified in Table 4 shall be calculated from the
spectral data measured with all pixels first in red, green, blue and white. Measurements
shall be made at the center of the panel.
SPEC. NUMBER
S864-1407
SPEC TITLE
HV121WX6-110 Product Specification
10
B2005-C001-C (3/3)A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
PAGE
OF 33
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.