Husqvarna LZ6127TKOA, LZ5225TKAA, LZ7227TKOA, LZ6123TLKOA, LZ6125TKAA User Manual

Operator´s manual
LZ5225TKAA/968999268, LZ6123TLKOA/968999269
LZ6125TKAA/968999270, LZ6127TKOA/968999271
LZ7227TKOA/968999272
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
English
RIDER
LZ SERIES
Contents
Contents...................................................................1
Introduction .............................................................3
Congratulations....................................................3
General ................................................................3
Driving and Transport on Public Roads ...............3
Towing .................................................................3
Operating .............................................................3
Good Service .......................................................4
Manufacturing Number ........................................4
Symbols and Decals ...............................................5
Safety Instructions..................................................7
General Use.........................................................7
Driving on Slopes.................................................9
Children..............................................................10
Maintenance ......................................................11
Transport............................................................13
Roll over Protecion system ROPS .....................14
Customer responsibilities...................................14
Controls .................................................................15
Control Locations ...............................................15
1. Motion Control Levers....................................16
2. Hour Meter .....................................................17
3. Tracking knob ................................................17
4. Parking Brake ................................................17
5. Blade switch...................................................18
6. Ignition Switch................................................18
7. Fuses .............................................................18
8. Seat Locking Device ......................................19
9. Refueling........................................................19
10. Fuel Shut Off Valve......................................20
11. Seat Adjustment Lever.................................20
12. Choke Control ..............................................20
13. Throttle Control ............................................21
14. Lifting Lever for the Mower Deck .................21
Pump release valves..........................................22
Accessories........................................................22
Operation ...............................................................23
Training ..............................................................23
Roll bar and safety belt ......................................24
Before Starting ...................................................24
Starting the Engine ............................................24
To start an engine with a weak battery ..............28
Running..............................................................29
Operating on hills ...............................................30
Mowing Tips.......................................................31
Stopping the Engine...........................................32
Moving by Hand .................................................33
Maintenance ......................................................... 34
Maintenance Schedule...................................... 34
Battery............................................................... 36
Ignition System.................................................. 37
Checking the Safety System ............................. 38
Checking the Engine's Cooling Air Intake ......... 40
Checking and Adjusting the Throttle Cable....... 40
Checking and Adjusting the Choke Cable......... 40
Cyclon air filter maintenance............................. 41
Replacing the Fuel Filter ................................. 43
Checking the Fuel Pump’s Air Filter.................. 43
Checking Tire Pressures................................... 44
Checking the Parking Brake.............................. 44
Checking the V-belts ......................................... 44
Checking the Blades ......................................... 45
Adjusting the Mower Deck ................................ 47
Engine oil cooler................................................ 48
Cleaning and Washing ...................................... 49
Caster Wheels................................................... 49
Hardware........................................................... 49
Lubrication............................................................ 50
Lubrication Schedule......................................... 50
General ............................................................. 50
Lubricating the Cables ...................................... 51
Shaft Bushings and Linkage ............................. 51
Lubricating in Accordance with the Lubrication
Schedule ........................................................... 51
Trouble Shooting Guide ...................................... 61
Storage.................................................................. 64
Winter Storage .................................................. 64
Service .............................................................. 64
Wiring diagram ..................................................... 65
Technical Data ..................................................... 66
Accessories .......................................................... 70
Torque Specifications........................................ 70
Conformity Certificates........................................ 71
USA requirements............................................. 71
Service Journal .................................................... 72
Delivery Service ................................................ 72
After the First 8 Hours ....................................... 73
25-Hour Service ................................................ 74
50-Hour Service ................................................ 75
100-Hour Service .............................................. 76
300-Hour Service .............................................. 77
At Least Once Each Year.................................. 78
English-1
WARNING !
Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance.
WARNING !
Engine exhaust, some of its constituents, and certain vehicle componets contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
WARNING!
Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
English-2

INTRODUCTION

Introduction
Congratulations
Thank you for purchasing a Husqvarna ride-on mower. This machine is built for the greatest efficiency and rapid mowing primarily of large areas. Controls in one place and a hydrostatic transmission regulated by steering controls also contribute to the machine’s performance.
This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably increase the lifespan of your machine and even increase its resale value.
If you sell your machine, be sure to give the operator’s manual to the new owner. The final chapter of this operator’s manual comprises a Service Journal. Ensure that service and repair
work is documented. A well kept service journal reduces service costs for the season-based maintenance and affects the machine’s resale value. Take the operator’s manual along when the machine is left at the workshop for service.
General
In this operator ’s manual, left and right, backwardand forward are used in relation to the machine’snormal driving direction.
Continuous dedicationto i mprove our productsrequire that specifications and design are subject to change without notice.
Driving and Transport on Public Roads
Check applicable road traffic regulations before driving and transport on public roads. If the machine is transported, you must always use approved fastening equipment and ensure that the machine is well anchored.
Towing
Do not tow this machine, it may cause damage to the drive system. Do not tow any trailers, etc with this mower. They may jackknife or overturn causing damage to the mower
and possibly serious injury to the operator.
Operating
This machine is constructed only for mowing grass on lawns and other free and even ground without obstacles such as stones, tree stubs, etc. The machine can also be used for other tasks when equipped with special accessories provided by the manufacturer, for which the operating instructions are provided in conjunction with delivery. All other types of use are incorrect. The manufacturer’s directions concerning operation, maintenance, and repairs must be carefully followed.
Lawnmowers and all power equipment, can be potentially dangerous if used improperly. Safety requires good judgement, careful use in accordance with these instructions and common sense.
The machine must only be operated, maintained, and repaired by persons that are familiar with the machine’s special characteristics and who are wel l versed in the safety instructions.
Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be followed without fail.
Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage.
English-3
INTRODUCTION
Good Service
Husqvarna’sproducts are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator ’s manual.
When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional:
This Operator’s Manual belongs to the machine with manufacturing number:
Engine Transmission
Manufacturing Number
The machine’s manufacturingnumber can be found on the printed plate affixed behind the battery under the seat. Stated on the plate, from the top are:
The machine’s type designation (I.D.).
The manufacturer's type number (Model).
The machine’s serial number (Serial no.) Please state the type designation and serial number when ordering spare parts.
The engine’s manufacturingnumber is stated on a barcode decal. This is placed on the left side of the crankcase, in front of the starter. The plate states:
The engine’s serial number (E/NO).
The engine’s type designation (Code). Please state these when ordering spare parts.
The hydraulic pump’s manufacturing number is stated on a barcode decal affixed to the left side of the pump housing. The plate states:
The pump’s type designation.
The pump’s serial number.
The hydraulic motor’s manufacturing number is stated on a round metal plate. This is placed on the gable inside the motor. The plate states:
The hydraulic m otor ’s type designation and design version.
The hydraulic m otor ’s serial number.
English-4
SYMBOLS AND DECALS
Symbols and Deca ls
These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean.
WARNING! Xxxxxxx xxxx xxxxxxxx xxx x
Xxxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx.
Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should neglect to follow instructions given in the manual.
IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx
xxxx xxxxxx xx.
Used in this publication to notify the reader of a risk of material dama ge, particularly if the reader should neglect to follow instructions given i n the manual. Used also when there is a potential for misuse or misassembly.
FuelChokeSlowFastNeutralReverse
Warning!
and flammable
Parking brake
CE conformity marking.Only for European market
Warning! Rotating blades, keep away from the discharge deck
Do not stand hereBattery acid is corrosive, explosive,
Noise emissions to the surroundings in accordance with the European Union’s directive. The machine’s emission is stated in the chapter
TECHNICAL DATA and on the decals.
Only machines for European market
Do not touch rotating parts
Use protective glasses
Use protective gloves
English-5
SYMBOLS AND DECALS
Read
Shut off engine
Keep a safe
Use on
No
Operator´s Manual.
Whole body exposureto thrown objects.
& remove key before performing any maintenance or repair work.
Severing of fingers & toes.
distancefrom the machine.
Do not open or remove safety shields while engine is running.
slopesno greater than 10°.
Careful backing up, watch for other people.
passengers
Careful going forward, watch for other people.
Moving sharp blades under cover
English-6
ROPS warning decal

SAFETY INSTRUCTIONS

Safety Instructions
These instructions are for your safety. Read them carefully.
WARNING! This symbol means that important safety instructions need to be emphasized. It
concerns your safety.
General Use
Read all instructions in this operator’s manual and on the machine before starting it. Ensure t hat you understand them and then abide by them.
Learn how to use the machine and its controls safely and learn how to stop quickly. Also learn to r ecognize the safety decals.
Only allow the machine to be used by adults who are familiar with its use.
Make sure nobody else i s in the vicinity of the machine when you start the engine, engage the drive, or run the machine.
Read the operator’s manual before starting the machine
8011-512
Make sure animals and people maintain a safe distance from the machine.
Stop the machine if someone enters the work area.
Clear the area of objects such as stones, toys, steel wire, etc. that may become caught in the blades and thrown out.
Beware of the discharge deck and do not point it at any one. Do not use the machine without the discharge deck in place.
Stop the engine and prevent it from starting before you clean the discharge deck.
Remember that the operator is responsible for dangers or accidents.
Never take passengers. The machine is only intended for use by one person.
Alwayslook down and behind before and duringreversing maneuvers.Keep a look out for both large and small obstacles.
Slow down before turning.
Shut down the blades when not mowing.
8011-513
Clear the area of objects before mowing
8011-520
Never take passengers
English-7
SAFETY INSTRUCTIONS
Be careful when mowing around fixed objects, so that the blades do not hit them. Never drive over foreign objects.
Only use the machine in daylight or in other well-lit conditions. Keep the machine a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks.
Never use the machine if you are tired, if you have consumedalcohol, or if you are takingother drugs or medication that can affect your vision, judgment,or coordination.
Beware of traffic when working near or crossing a road.
Never leave the machine unsupervised with the engine running. Always shut down the blades, pull back the parking brake, stop the engine, and remove the ignition key before leaving the machine.
Neverallow children or other personsnot trained in the use of the m achine to use or service it. Local laws may regulate the age of the user.
WARNING! Engine exhaust and certain
vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a colorless, poisonous gas. Do not use the machine in enclosed spaces.
8011-518
Keep children away from the work area
WARNING! When using the machine, approved personal protective equipment shall be
used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment.
Make sure that you have first aid equipment close at hand when using the machine.
Never use the machine when barefoot. Always wear protective shoes or boots, preferably with steel toecaps.
Always wear approved protective glasses or a full visor when assembling or driving.
Always wear gloves when handling the blades.
Never wear loose clothing that can get caught in moving parts.
Use ear protectors to avoid damage to hearing.
8011-670
Personal protective equipment
English-8
SAFETY INSTRUCTIONS
9
Driving on Slopes
Driving on slopes is one of the operations where the risk is greatest that the driver will lose controlor the machine will tipover,w hich can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if you feel unsure, do not mow the slope.
Do as follows
Remove obstacles such as stones, tree branches, etc.
Watch out for and avoid drivingover furrows, holes, and bumps. On uneven terrain, the machine can tip more easily. Long grass can hide obstacles.
Mow up and down, not side-to-side.
Drive evenly and slowly. Use small movements of the steering controls.
Be extra cautious with any additional equipment, which can alter the machine’s stability.
If the machine stops while going uphill, disengage blades and back down slowly.
6003-004
Mow up and down, not side-to-side
Do not
Do not make sudden changes in speed or direction.
Do not drive the mower on terrain that slopes more than 10°.
Do not mow near verges, ditches, or banks. The machine can suddenly spin around if a wheel goes over the edge of adroporditch,orifanedgegivesway.
Do not mow wet grass. It is slippery, and the tires can lose their grip, so that the machine slides.
Do not try to stabilize the machine by putting a foot on the ground.
Do not drive near verges or ditches when cleaning the machine.
Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.
Avoid starting or stopping on a slope. If the tires begin t o slip, shut down the blades and drive slowly straight down the slope.
8011-51
Be extra cautious when driving on slopes
English-9
SAFETY INSTRUCTIONS
Children
Serious accidentsmay occurif you fail to be on guard for children in t he vicinity of the machine.Chi ldren are often attracted to the machine and mowing work. Never assume that children will stay put where you last saw them.
Keepchildrenawayfromthemowing area and under close supervision by another adult.
Keep an eye out and shut off the machine if children enter the work area.
Beforeand duringa reversing maneuver, look backward and downward for small children.
Never allow a child to ride with you. They can fall off and injure themselves seriously or prevent risk-free maneuvering of the machine.
Never allow children to operate t he machine.
Be particularly cautious near corners, bushes, trees, or other objects that block your view.
8011-517
Never allow children to operate the machine
English-10
SAFETY INSTRUCTIONS
Maintenance
WARNING! The engine must not be started when the driver’s floor plate or any protective plate
for the mower deck’s drive belt is removed.
Stop the engine. Prevent the enginefrom starting by removing the spark plug cables from the spark plugs or by removing the ignitionkey before making any adjustments or performing maintenance.
Never fill the fuel tank i ndoors.
Fuel and fuel fumes are poisonous and extremely flammable. Be especially cautious when handling fuel, as carelessness can result i n personal injury or fire.
Onlystore fuel incontainers approvedfor the purpose.
Never remove the fuel tank cap and never fill the fuel tank while the engine is running.
Allow the engine to cool before refueling. Do not smoke. Do not fill fuel in the vicinity of sparks or open flames.
If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.
Store the machine and fuel in sucha way that there is no risk of l eaking fuel or fuel vapor leading t o damages.
Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.
Avoid overfilling. If you spill fuel on the machine,wipe up the spill and wait untilit has evaporated before starting the engine. If you have spilled fuel on your clothing, change your clothing.
Allow the machine to cool before taking any actions in the engine compartment.
Be very careful when handling battery acid. Acidon skin can cause seriouscorrosive burns. If you spill battery acid on your skin, rinse immediately with w ater.
8011-516
Never fill the fuel tank indoors
WARNING! The engine, the exhaustsystem,
and the hydraulic system’s componentsbecome very warm during operation. Risk for burns if touched.
Always use protective glasses when handling the battery.
WARNING! The battery contains lead and
lead compounds, chemicals that are considered to cause cancer, birth defects, and other reproductive system damage. Washyour hands aftertouching the battery.
English-11
SAFETY INSTRUCTIONS
D b i
R
Acid in the eyes can cause blindness, contact a doctor immediately.
Be careful when servicing the battery. Explosive gases form in the battery. Never perform maintenance on the battery when smoking or near open flames or sparks. The battery can explode and cause serious injury/ damage.
Ensurethat nuts and bolts,especially the fasteningboltsfor the blade attachments, are properly tightened and torqued and that the equipment is in good condition.
Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven with defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices.
Do not change the settings of governors and avoid running the engine with overly high engine speeds. If you run the engine too fast, you risk damaging the machine components.
6003-009
o not smoke when performing maintenance on the
attery. The battery can explode and cause serious
njury/damage
Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury .Sparking in this circuit can not occur afterthe chassis cable (normally negative, black) is removed from the battery.
WARNING! Avoidelectrical sparking and its
consequences by the following routines:
Use protective goggles. Ensure that the fuel filler cap is mounted and no flammable substances is stored in an open vessel. Never work with the starter circuit if there is spilled fuel. Disconnect the chassis cable from the battery first and reconnect it last. Do not make a bridge short curcuit across the starter relay to run the starter.
Never use the machine indoors or in spaces lacking proper ventilation. The exhaustfumes containcarbon monoxide, an odorless, poisonous, and lethal gas.
8009-728
isk of sparking
8011-515
Never drive the machine in an enclosed space
English-12
SAFETY INSTRUCTIONS
Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting.
Never make adjustments with the engine running.
Themachine is testedand approvedonly with the equipment originally provided or recommended by the manufacturer.
The blades are sharp and can cause cutsand gashes.Wrap the blades or use protective gloves when handling them.
Check the parking brake’s functionality regularly. Adjust and service as necessary.
The mulch blades should only be used in familiar areas when higher quality mowing is desired .
Reduce the risk of fire by r emoving grass, leaves, and other debris that may haveaccumulated on the machine. Allow the machine to cool before putting it in storage.
If a hydraulic leak is suspected, use a piece of cardboard or wood, NOT your hands to check for leaks.
Transport
The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer.
Use protective glasses for maintenance work.
8011-644
Clean the machine regularly
WARNING! Escaping hydraulic oil under
pressure can have sufficient force to penetrate the skin, causing serious injury.If injured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immdediately.
Use an approved trailer to transport the machine.Activate the parkingbrake, turn off the fuel supply, and fasten the machine with approved fastening devices, such as bands, chains, or ropes, when transporting.
Check and abide by local traffic regulations beforetransporting or driving the machine on any road.
Do not tow this machine, it m ay cause damage to the drive system.
Do not tow any trailers, etc with this mower. They may jackknife or overturn causing damage to the mower and possibly serious injury to the operator.
IMPORTANT INFORMATION The parking brake is not sufficient to lock
the machine in place during transport. Ensure that the machine is well fastened to the transport vehicle. Always reverse the machine onto the transport vehicle to avoid tipping it over.
English-13
SAFETY INSTRUCTIONS
Roll over Protecion system ROPS
The ROPS increasest he basic weight of the unit by 42 lbs/19 kg. The ROPS on the US units are standard, on the European units is the ROPS an accessory.
WARNING! The structures capability may be imparired by structural damage if overturned, or
alteration occurs. If any of these conditions take place, the total structure MUST be replaced.
Do not use ROPS as a lifting, attaching or anchoring point.
Do not use ROPS for wrecking or towing.
Do not exceed Max GVW: 2822 lbs/1283 kg.
Read machine operator´s manual before each use.
Securely fasten your seat belt if the unit has a ROPS.
Where possible, avoid operating the unit near di tches, embankments and holes.
Reduce speed when turning, crossing slopes and on rough, slick or muddy surfaces.
Stay off slopes too steep for safe operation.
Watch where you are going, especially at row ends, on roads and around trees.
Do not permit others to ride.
Operate the mower smoothly - no jerky turns, starts or stops.
When mower is stopped, set brakes securely and use park brake.
If any part of ROPS is damaged, the entire ROPS must be replaced.
Check all bolts including seat belt for correct torque before each use.
Check ROPS structure for damage before each use.
ROPS bar is NOT intended for use in sub zero temperatures.
Customer responsibilities
Read and observe the safety rules.
Followa regularschedule in maintaining, caring for and using your mower.
Follow the instructions under "Maintenance” and "Storage” sections of this owner’s manual.
WARNING! This mower is equipped with an internal combustion engine and should not be
used on or near any unimproved forest-covered, bush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
A spark arrester for the muffler is available through your authorized Husqvarna dealer.
English-14

CONTROLS

Controls
This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Kawasaki or Kohler four-stroke V-Twin engine developing 23-27 horse power.
Transmission from the engine is made via two belt-driven hydraulic pumps, which in turn drive a hydraulic motor for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed.
8011-464
Zero Turn Rider
Locations of the controls
Control Locations
Page Page
1. Motion control, levers 16 8. Seat locking device 19
2. Hour meter 17 9. Fuel tank cap 19
3. Tracking knob 17 10. Fuel shut off valve 20
4. Parking brake 17 11. Seat adjustment lever 20
5. Blade-switch 18 12. Choke control 20
6. Ignition switch 18 13. Throttle control 21
7. Fuses 18 14. Cutting height adjuster 21
8011-767
English-15
CONTROLS
1. Motion Control Levers
The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward.
When both controls are in the neutral position (N), the machine stands still.
By moving both controls an equal amount forward or backward, the machine moves in a straight line forward or backward respectively.
In order, for example, to turn right while moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right.
Zero turn can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. The rotation direction when zero turning is determined by which steering control is moved backward behind the neutral position. If the left steering control is pulled backward, the machine turns to the left. Use extra care when using this maneuver.
8011-788
Steering controls
WARNING !
The machine can turn very rapidly if one steering control is moved much further forward than the other.
If the steering controls are in uneven positions when standing still they can be adjusted using the adjustment screws on the steering lever, not the link system, for the controls.
1
2
4
1Forward 2 Neutral 3 Neutral slot, Neutral lock 4 Reverse
Motion control lever pattern (right side)
3
8011-791
English-16
CONTROLS
2. Hour Meter
The hour meter displays the total operating time.
It will flash CHG OIL (Change Oil) at 50 hour intervals. The flash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically. The hour meter can not be manually reset.
3. Tracking knob
The tracking knob is located in front of the left control lever. Rotating this knob allows fine tuning adjustments so that the machine tracks straight with the drive levers in the full forward position.
hour meter
Hour meter
Rotate the knob clockwise (as viewed from the operating position) to increase the speed or counter clockwise to decrease the speed on the left control lever. Example: If control levers are full forward and the unit turns to the right, turn the tracking knob counter clockwise to decrease the speed on the left control lever.
4. Parking Brake
The parking brake is found on the left of the machine. Pull the lever backward to activate the brake and forward to release it.
8011-442
Tracking knob
Parking brake not activated
8011-511
English-17
CONTROLS
5. Blade switch
In order to engage the mower deck, pull the knob out; the mower blades are disengaged when the knob is depressed.
6. Ignition Switch
The ignition key is placed on the driver’s panel and is used to start and stop the engine.
8011-510
Blade Switch
IMPORTANT INFORMATION
Do not run the starter for more than five seconds each time. If the engine does not start, wait about 10 seconds before re­trying.
7. Fuses
The fuses are located in a holder to the left of the hydraulic tank. They are flat pin fuses of the same type used in automobiles.
There are three fuses, as well as socket for one spare fuse.
Fuse ratings and functions:
20 A, Primary fuse.
7.5 A, Mower deck coupling.
7.5 A, Accessory outlet
Socket for spare fuse.
8011-521
Ignition key and hour meter
8011-746
Fuses
English-18
CONTROLS
8. Seat Locking Device
Under the rear part of the seat is a locking device that locks the seat into its folded position. The seat has a linked fixture at the front edge and can be folded forward when the locking device is pushed.
9. Refueling
The machine has two fuel tanks, one on each side just behind the seat. The tanks take
5.7 gallons (22 liters) each.
8011-440
The seat’s locking device
The engine will run on a minimum of 87-octane unleaded gasoline (no oil mix). Environmentally adapted alkylate gasoline can be used beneficially. See also Technical Data concerning methanol and ethanol fuels.
WARNING!
Gasoline is highly flammable. Observe caution and fill the tank outdoors (see the safety rules).
WARNING!
Fill to bottom of filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.
When operating in temperatures below 32° F. (0° C.), use fresh, clean winter grade gasoline to help insure good cold weather starting.
8011-524
Fuel tanks
IMPORTANT INFORMATION
Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never use engine or carburetor cleaners in the fuel tank or permanent damage may occur.
English-19
CONTROLS
10. Fuel Shut Off Valve
The fuel shut off valve is located at the right rear of the seat. The valve has three positions; right tank, left tank and center is the off position.
11. Seat Adjustment Lever
The seat can be adjusted lengthways. When making adjustments, the lever under the front edge of the seat is moved to the left (as seen by the driver in the seat), after which the seat can be moved backward or forward.
8011-506
Fuel shut off valve
12. Choke Control
The choke control is used for cold starts in order to provide the engine with a richer fuel mixture.
For cold starts the control should be pulled out.
English-20
8011-441
Lengthways adjustment
8011-508
Choke control
CONTROLS
13. Throttle Control
The throttle control regulates the engine speed and thereby the rate of rotation of the blades, assuming the blade switch is pulled out, see Engaging the Mower Deck.
In order to increase or decrease the engine speed, the control is moved downward or upward respectively.
Avoid idling the engine for long periods, as there is a risk of fouling the spark plugs.
USE FULL THROTTLE WHEN MOWING, for best mower performance and battery charging.
14. Lifting Lever for the Mower Deck
The lifting lever is used to place the mower deck in the transport position or one of the 17 different cutting height positions.
The cutting height is set by placing a peg in the hole for the desired cutting height and the peg is then locked on the inside (hidden in the illustration) with the supplied pin.
1. Pull the lever backward to the locked position to engage the transport position. The deck is then raised.
2. Depress the lock handle, counter hold, and move the lifting lever forward toward the peg to engage the set cutting height. The deck is then lowered.
3. The lifting lever can also be used to temporarily adjust the cutting height, such as when passing a minor bump in the lawn.
8011-509
Throttle control
8011-525
The mower deck’s lifting lever
IMPORTANT INFORMATION
In order to obtain an even cutting height it is important that the air pressure in all four tires is the same 15 psi (1 bar).
English-21
Cutting height pedal
On some models there is a deck assist lift pedal to aid in the lifting of the deck.
Pump release valves
IMPORTANT INFORMATION
Only rotate valve 1/4 - 1/2 turn to release system.
Tighten the valve moderately.
Do not overtighten the valve when closing. That can damage the valve seat.
CONTROLS
8011-465
Cutting height pedal
Pump release valves are located at the pumps. They are used to release the system so the machine may be moved by hand when not running. Tilt seat forward to gain access to the pumps. Use a 5/8” wrench to open valve.
Accessories
For mulching, there is a BioClip attachment available. This is mounted underneath the mower deck and consists of control plates and BioClip blades.
8011-507
Pump release valve
8011-566
BioClip attachment
English-22

OPERATION

Operation
Read “Safety Instructions” on page 7 and following pages, if you are unfamiliar with the machine.
Training
Zero turn mowers are far more manueverable than typical riding mowers due to their unique steering capabilities.
We recommend that this section be reviewed in its entirety prior to attempting to m ove the mower under its own power.Additionally,we suggest when firstoperating mower,use a reduced throttle speed and reduced ground speed by NOT moving control levers to the furthest forward or reverse positions during i nitial operation, or until operator becomes comfortable with controls. We also suggest first time users, or new users to ZeroTurnmowers to become familiar with the mowers movement on a hard surface, such as concrete or blacktop PRIOR to attempting to operate on turf. Until operator becomes comfortable with mower controls and zero turning capability, they may damage turf due to over aggressive maneuvers.
To move forward and backward
The direction and speed of the mowers movements is effected by the movement of the control lever(s) on each side of mower. The left control lever controls the left wheel motor. The right control l ever controls the right wheel motor.
IMPORTANT IN FORMATION When control levers are in the reverse
position they return to neutral when released. This may cause the mower to suddenly stop.
First time users should push mower (see “Moving by Hand”on page 33) to an open, flat area, w ithout other people or vehicles/obstaclesnear by. In order to move unit under its own power, the operator must be in the seat, start engine (see “Before Starting” on page 24),adjust engine speed toidle, disengage park brake, do not engage blades at this time, rotate control levers inward. As long as the control levers have not been moved forward or backwards, mower will not move. Slowly move both control levers forward slightly, this will allow mower to start moving forward in a straight line. Pull back on control levers to the neutral position and mower should stop moving. Pull back slightly on control levers, this will allow mower to start moving backwards. Push forward on control levers to the neutral position and mower should stop moving.
To turn to the right
While moving in a forward direction, pull the right lever back towards the neutralposition while maintaining the position of the left lever, this will slow the rotation of the right wheel and cause the machine to turn in that direction.
To turn to the left
While moving in a forward direction pull the left lever back towards the neutral position while maintaining the position of the right lever, this will slow the rotation of the left wheel and cause the machine to turn in that direction.
To zero turn
While moving in a forward direction, first pull both control levers back until the mower stops or slows dramatically. Then by alternating one lever slightly to the forward position and the other in the reverse position.
English-23
Loading...
+ 57 hidden pages