Hunter Engineering Quick Check System Specification Sheet
QC31 / QC32 / QC33
Quick Check® System
HARDWARE / SPECIFICATIONS / FEATURES
Power Requirements 115/230V, 15 amp*, 50/60 Hz, 1 ph †
Processor 3.06 Ghz Intel® Core™ i3
Memory 4 GB of DDR3 SDRAM
Hard Drive 120 GB Solid State Hard Drive (or greater)
DVD-RW/CD-RW Drive Standard
Monitor Class 24” Widescreen LCD
Wireless Network Module Yes - Standard
QC31
QC32
Operating System
Compact Console with Open Printer Standard
Printer HP Color Printer
Wireless Remote Standard
Power Line Filter Standard
Drive-on Camera Compatible Yes
Hunter QuickCheck® Software Standard
Vehicle Specications (30 plus years) Standard - 2 Years Free Updates
Real-Time Specs Delivered by Web WebSpecs
VIN Barcode Reader Standard
HunterNet
QC Alignment Printout 3 Available Options
*Amperage shown is minimal circuit rating. † Isolated Ground Recommended.
®
HARDWARE
Windows® 7 - 64 Bit
PRODUCTIVITY TOOLS
®
3 Years Free Access for 1 User
QC33
OPTIONS / ACCESSORIES
Tread Depth Tool
20-2782-1*
*20-2072-1 XF-2 Pod Required if kit 20-2785-1 or 20-2796-1 not purchased
CodeLink® 2 w/ Pod
20-2785-1
XF-2 Pod
20-2072-1
SPECIFICATIONS
Metal on Metal Contact Non-Contact
Weight of Target 6 lbs
Prole of Target 9 in.
Installation Time 5 seconds
Wheel Assembly Range 40 in.
Rolling Compensation Style Forward
Mobile Storage Carts 2
Camera Resolution
Reccomended Bay Length 25 ft.
Battery Tester
20-2781-1*
2,608 x 1,952
20,000,000 px
Accessory Bundle
20-2796-1
Continued on Reverse
For aligner information visit:
www.hunter.com/inspection
Because of continuing technological advancements, specications, models and options are
subject to change without notice.
www.hunter.com/company/ndrep.cfm
For local contact visit:
For general inquiries visit:
www.hunter.com or call 800-448-6848
Copyright © 2013 - 2015, Hunter Engineering Company
Form 6666-T, 10-13a
Supersedes Form 6666-T, 06-13
QC31 / QC32 / QC33
Quick Check® System
CONSOLE CONFIGURATIONS
QC31 QC31A QC31B QC32 QC32A QC32B QC33 QC33A QC33B
Battery Tester
20-2781-3
Tread Depth Tool
20-2782-1
CodeLink 2 w/ Pod
20-2785-1
Brake Plates
B424-01-PNT
Drive Thru Sensors
Drive Under Sensors
Cabinet Mount Sensors
QC31 - DRIVE THRU DIMENSIONS
H
W
D
W
QC Cabinet QC31
Width (W)
Height (H)
H
Depth (D)
Sensor
D
Range
Shipping
Weight
23 in.
584 mm
65 in.
1651 mm
23 in.
584 mm
-
215 lbs
98 kg
132 in.
3353 mm
50 in.
1270 mm
11 in.
279 mm
78 to 106 in.
1981 to 2692 mm
742 lbs
337 kg
QC32 - DRIVE UNDER DIMENSIONS
W
H
W
H
QC33 - CABINET MOUNT DIMENSIONS
Because of continuing technological
advancements, specications,
models and options are subject to
change without notice.
W
QC Cabinet QC32
Width (W)
Width (W)
D
W
H
D
(With Monitor Kit)
Height (H)
Height (H)
(With Monitor Kit)
Depth (D)
Depth (D)
(With Monitor Kit)
It is recommended that a
clearance warning be hung at
D
the entrance of Drive Under
Quick Check® bays.
Sensor
Range
Shipping
Weight
23 in.
584 mm
23 in.
584 mm
65 in.
1651 mm
65 in.
1651 mm
23 in.
584 mm
23 in.
584 mm
-
215 lbs
98 kg
135 in.
3429 mm
135 in.
3429 mm
15in.
381 mm
18 in.
457 mm
16 in.
406 mm
22 in.
559 mm
119 in.
3023 mm
689 lbs
298 kg
QC33
Width (W)
Height (H)
Depth (D)
H
Sensor
Range
Shipping
D
Weight
Copyright © 2013 - 2015, Hunter Engineering Company
Supersedes Form 6666-T, 06-13
96 in.
2438 mm
82.5 in.
2096 mm
23 in.
584 mm
102 to 126 in.
2591 to 3200 mm
889 lbs
403 kg
Form 6666-T, 10-13a
Loading...