Hunter Engineering Quick Check System Brochure

Hunter Quick Check™ System

Two-Minute Inspection Process

L441/ L444 Four-Post Lift

NEW!

Quick Check™ inspection process identifi es repair opportunities in

battery tester

tire tread

brakes

alignment

milage

VIN

printer

camera

oil change

customer data

vehicle

condition

HVAC

starting/

charging system

X

X

X

X

X

X

X

X

X

X

underhood

shocks

TPMS

battery
tester

handheld tire tread

brakes

alignment

tire pressure

data
connection

drive over tire tread

Coming

Soon!

Quick Tread

✔ Automatically measures tread depth
✔ No time loss

Stopping Check

™

✔ Wheels tested individually
✔ Tests brake force at each wheel

and overall vehicle deceleration

Diagnostic Check

✔ Retrieves emission system codes
✔ Wirelessly transfers important

vehicle information to console

Tire Pressure

✔ Automatically adjusts air pressure

to user-entered OEM spec

✔ Records before and after pressures

Handheld Tread Depth

✔ Quick and easy tire wear check
✔ Alternative to drive over tread depth

Vehicle OE warranty policies vary, please consult OE guidelines when establishing vehicle inspection policies.

1:58

Wheel Alignment

✔ Fast verifi cation of alignment need
✔ Boost traffi c to most profi table

undercar service

Battery Health

✔ Tests battery to OEM specs
✔ Sends results to console

wirelessly in 10 seconds

Test performed using drive over tread depth unit.

Wheel Alignment

Hunter’s patented alignment check system is the quickest way to measure alignment angles that affect
tire life. The test takes less than a minute to produce total toe and camber measurements for both axles.
Results are displayed on the customer printout in easy-to-understand, color-coded graphics.

✔ Check every vehicle that enters shop
✔ Fastest way to check tire wear angles
✔ Doesn’t tie up alignment bay
✔ Available in several confi gurations

to accommodate shop needs

✔ Gain more repair authorizations

with clear, informative printouts

Barcode Reader

✔ Enter vehicle into system
✔ Recall OE specs

Drive-thru configuration

Wheel alignment check features proven HawkEye Elite® technology

QuickGrip

™

adaptors

✔ Fast setups
✔ Adjusts easily to

various wheel sizes

✔ No metal-to-metal

contact

✔ No knob twisting
✔ Lightweight
✔ Durable
✔ Low-maintenance

HawkEye Elite® cameras

✔ High-resolution

cameras

✔ Dedicated camera

for each wheel

✔ Pinpoint accuracy
✔ Compensate

sensors and capture
measurements with
one forward roll

Wheel alignment check requires a Quick Check console.

Choose from several confi gurations to best fi t your shop

Drive-under configuration* Mobile, multi-bay configuration

0:58

Alignment results your customers will see...

Alignment test printout shows pass/fail results for:

• Front and rear total toe

*Shown with optional Monitor Kit (20-2899-1)

• Front and rear camber

• General alignment condition

Quick Tread

battery
tester

handheld tire tread

brakes

alignment

tire pressure

data
connection

drive over tire tread

Quick Tread™ — Hunter’s drive over tread depth unit — automatically measures the tread depth
of each tire without a time loss. The unit detects tread grooves and reports up to six measurements
per tire. Tread depth results are sent to the console and graphically shown on the customer printout.

™

Coming

Soon!

0:06

Quick Tread requires a Quick Check console.