Hunter Engineering Heavy-Duty Specification Sheet
PF Heavy Duty Alignment Pit System
Pit Rack
SPECIFICATIONS
Std. Pit Construction NO deep center, refer to Forms 752-T and 748-T
Tee Pit Construction Refer to Forms 3507-T and 748-T (Kit 20-869-1)
Minimum Concrete Spec. 6 in. (152 mm) thick, 3000 PSI (20700 kPA) rating
Pre-Installation Kits Required before pouring pit.
Optional 20 FT T-Pit* Kit 20-3107-1 (two required)
Optional +10 FT Jack Rail* Kit 20-3107-1 (one for each +10 FT)
Product Specication
Max. Front Axle Weight 18,000 lbs. (8165 kg)
Rear Axle Jack Rail
(Optional T-Pit)*
PF Pit Installation
(shown with optional T-pit (jack rail) and jack tray)
ADJUSTABLE
PEDESTALS AND
RUNWAYS
(to handle a wide
range of track widths)
Work Beam 100 tons (90 Mg)
Front Axle Track Width
(inside and outside width)
Pit Depth 58 inches (1473 mm)
Site Specications
Optional: Kit 20-869-1 (20 feet),
Kit 20-1517-1 (additional 10 feet),
jack tray 11-637-1, HD pit jack 133-77-2
Adjustable Pedestals and Runways
48 -120 inches (1219 - 3048 mm)
REAR AXLE
JACK RAIL
(T-PIT)
(optional
PF pit feature)
RISER AND
PLATFORM
(to reach front wheels
within the 58 inch pit)
MODEL COMPARISON
Features
Capacity
Axle Jack Rail
Work Beam
Pit Depth
Track Width
(inside - outside width)
Adjustable Runways
PF Pit Illustration
PT PF RKHD PE P44x
Heavy Duty
18,000 lbs. / axle
(8165 kg)
Heavy Duty
18,000 lbs. / axle
(8165 kg)
optional
T-Pit
Heavy Duty
20,000 lbs. / axle
(9072 kg)
optional
jack tray
Meduim Duty
10,000 lbs. / axle
(4535 kg)
N/A
N/A N/A N/A
58 in.
(1473 mm)
48 in. - 120 in
(1219 mm - 3048 mm)
58 in.
(1473 mm)
Adjustable Runways
48 in. - 120 in
(1219 mm - 3048 mm)
24 or 30 in.
(610 mm or 762 mm)
Fixed Runways
40 in. - 106 in.
(1016 mm - 2692 mm)
36 in.
(914 mm)
Adjustable Runways
48 in. - 120 in
(1219 mm - 3048 mm)
100 TON
(90 Mg)
WORK BEAM
(unique
PF pit feature)
Light Duty
18,000 lbs. Total
(8165 kg)
36 in.
(30 & 24 in. available)
(914, 762 or 610 mm)
Fixed Runways
40 in. - 85 in.
(1016 mm - 2159 mm)
For lift rack information visit:
www.hunter.com/rack
For general inquiries visit:
www.hunter.com
or call
800-448-6848
Continued on Page 2
For local contact visit:
www.hunter.com/company/ndrep.cfm
Form 6942-T, 03-15a
Copyright © 2015, Hunter Engineering Company
PF Heavy Duty Alignment Pit System
15 ft.
(4572 mm)
10 ft. max.
(3048 mm)
20 ft.
(6096 mm)
61 5/8 in.
(1565 mm)
(for Min.)
Minimum
12 ft. 10 in.
(3911 mm)
34 in.
(864 mm)
Pit Depth - 58 in.
(1473 mm)
18 in.
(457 mm)
15 ft.
(4572 mm)
10 ft. max.
(3048 mm)
61 5/8 in.
(1565 mm)
(for Min.)
Minimum
12 ft. 10 in.
(3911 mm)
PF - 58 in.
(1473 mm)
Pit Depth
18 in.
(457 mm)
Pit Rack
LAY-OUT Construct pit per referenced forms.
PF Pit Layout
with optional T-Pit
Kit 20-869-1 (20 feet) shown
Kit 20-1517-1 (+10 feet) not shown
The following items are to be supplied by the customer:
PF Pit Layout
without optional T-Pit
Concrete to construct pit / Concrete reinforcement / Electrical xtures, wiring, and power (if necessary) / Piping /
Pit ventilation materials / Drainage materials / Edging (see blue prints) / Railings / lifting equipment for installation.
Copyright © 2015, Hunter Engineering Company
Form 6942-T, 03-15a
Loading...