
HawkEye Elite
™
HE421 Series Sensors
STANDARD FEATURES and ACCESSORIES
HE421WM HE421FC HE421FM HE421ML HE421LC HE421CM3 HE421CM4
Sensor Mount Type
Power Requirements
TD Targets
QuickGrip Adaptors
Vertical Camera
Adjustment
Mobile - Bay-to-Bay
Wall / Ceiling
Mount
Supplied by
console
Fixed Single
Column Floor
Mount
Supplied by
console
Fixed Dual
Column Floor
Mount
Supplied by
console
Manually Ad-
justable Single
Column Floor
Mount
Supplied by
console
Electrically
Adjustable
Single Column
Floor Mount
120/240V 2
amp, 1 ph
Manually
Adjustable Mo-
bile Cabinet
Mount
Supplied by
console
Manually
Adjustable Mo-
bile Cabinet
Mount
Supplied by
console
QuickComp
High Resolution
Cameras
Customizable
Lighted Sign
FIA Compatible
Multiple Target Stor-
age Congurations
SPECIFICATIONS / MEASUREMENTS / ADJUSTMENTS
SPECIFICATIONS
Metal on Metal Contact Non-Contact
Weight of Target 6 lbs
Prole of Target 9 in.
Installation Time 5 seconds
Rolling Compensation
Style
Camera Resolution
Track Width 80 in.
Wheel Base 210 in.
Distance to Wall 66 - 107 in.
Suggested Distance 99 in.
Short Bay Distance
(see site info)
ADJUSTMENTS
Way Up Way Out
WinToe
Wheel-Off Adjustment
(WinAlign
®
9 & Up)
Forward
2,608 x 1,952
20,000,000 px
66 in.
*
Optional
MEASUREMENTS
S.A.I. & Included Angle
Set Back
Max Steering Angle To Lock*
Live Ride Height Standard **
Wheelbase Difference
Track Width Difference
Tread Width Difference
Lateral Offset
Rear Set Back
Axle Offset
SBDA
Body Angle
Body Wheel Offset & Setback
Body Roll
**
**
**
**
* Requires standard wide-angle target extensions.
** Requires Ride Height targets. Standard with WA400 consoles. Optional with WA300 consoles.
Continued on Page 2
Copyright © 2011, Hunter Engineering Company
Form 6370-T, 09-11
Supersedes Form 6370-T, 07-11

HawkEye Elite
™
HE421 Series Sensors
DIMENSIONS / WEIGHTS
HE421WM HE421FC HE421FM HE421ML HE421LC HE421CM3 HE421CM4
Width (W)
Height (H)
Depth (D)
Vertical Camera
Movement Range
Shipping Weight
105 in.
2667 mm
30 in.
762 mm
15 - 30 in.*
381 - 762 mm*
N/A N/A N/A
316 lbs 442 lbs 832 lbs 527 lbs 465 lbs 545 lbs 510 lbs
105 in.
2667 mm
122.5 in.
3112 mm
15 in.
381 mm
162.5 - 205.5 in.
4128 - 5220 mm
85 - 114.5 in.
2159 - 2908 mm
18 in.
457 mm
* Use of Wall Mount Extenion Kit adds additional 27 - 45 in. to depth.
FIXED POSITION CAMERA SENSORS
105 in.
2667 mm
122.5 in.
3112 mm
15 in.
381 mm
56 - 113.5 in.
1422 - 2883 mm
(from oor)
105 in.
2667 mm
122.5 in.
3112 mm
15 in.
381 mm
56 - 113.5 in.
1422 - 2883 mm
(from oor)
105 in.
2667 mm
105.5 in.
2680 mm
23 in.
584 mm
60 - 95.5 in.
1524 - 2426 mm
(from oor)
105 in.
2667 mm
105.5 in.
2680 mm
30 in.
762 mm
60 - 95.5 in.
1524 - 2426 mm
(from oor)
HE421WM
HE421FC
H
W D
W
VERTICALLY ADJUSTABLE CAMERA SENSORS
HE421ML
W
H
D
HE421FM
D
D
H
H
W
HE421LC
D
W
H
VERTICALLY ADJUSTABLE MOBILE CABINET CAMERA SENSORS
HE421CM3
W
D
H
HE421CM4
W
Continued on Page 3
Because of continuing technological advancements, specications, models and
options are subject to change without notice.
D
H
Copyright © 2011, Hunter Engineering Company
Supersedes Form 6370-T, 07-11
Form 6370-T, 09-11

HawkEye Elite
HE421 Series Sensors
CONSOLE COMPATIBILITY
WA400 WT400 WA300 WT300 WA200 WT200 WA100 WT100
HE421 Sensors
™
WinAlign® Version Required
Additional Plus Key Required
V12.0 /
V12.1
No Additional
Key Required
V12.0 /
V12.1
No Additional
Key Required
INCLUDED WITH ALL HE421 SENSORS
Wide-Angle Targets
Protective Rings for Deep
Wheel Extensions
Quick-Change Arms Deep-Wheel Extensions
Protective Rings for Quick-
Grip Adaptors
V12.1 V12.1 V12.1 V12.1 V12.1 V12.1
Kit 20-2005-1
(448-1016 V2)
Kit 20-2005-1
(448-1016 V2)
No Additional
Key Required
No Additional
Key Required
Kit 20-2005-1
(448-1016 V2)
Kit 20-2005-1
(448-1016 V2)
Target Storage Brackets
TD Targets QuickGrip Adaptors
For aligner information visit:
www.hunter.com/alignment
For local contact visit:
www.hunter.com/company/ndrep.cfm
For general inquiries visit:
www.hunter.com or call 800-448-6848
Because of continuing technological advancements, specications, models and
options are subject to change without notice.
Copyright © 2011, Hunter Engineering Company
Form 6370-T, 09-11
Supersedes Form 6370-T, 07-11