Hunter Engineering 6353-T, DSP7705 Specification Sheet
DSP7705
Wheel Balancer
SPECIFICATIONS
Power Requirements 110V, 6 amp, 50/60 Hz, 1 ph
Air Supply Requirements n/a
Capacity
Rim Width 1.5 in to 20 in (38 mm to 508 mm)
Rim Diameter 10 in to 24.5 in (254 mm to 622 mm)
ALU 7.5 in to 38 in (191 mm to 965 mm)
®
Automatic Inner Dataset
Max. Tire Diameter 44 in (1118 mm)
Max. Tire Width 20 in (508 mm)
Max. Tire Weight 150 lbs (68 kg)
Imbalance Resolution ± 0.05 oz (1.0 g)
Placement Accuracy 512 positions, ± 0.35°
Balancing Speed 150 rpm
Motor Programmable drive system and DC motor
Shipping Weight 450 lbs (204 kg)
Range 10 in to 28 in (254 mm to 711 mm)
DSP7705
MODEL FEATURES / DIMENSIONS
Split Spoke® & Split
Weight Modes
Automatic Inner
Dataset® Arm
W D
CenteringCheck®
Verication
H
Servo Stop Drive
Control
Width
(No Wheel Lift)
45.5 in
(1156 mm)
Width (W) Height (H) Depth (D)
66.5 in
(1689 mm)
60.5 in
(1537 mm)
For balancer information visit:
www.hunter.com/balancer
For local contact visit:
www.hunter.com/company/ndrep.cfm
For general inquiries visit:
www.hunter.com
or call
800-448-6848
Wheel Lift Kit, 20-3101-1 is compatible
with DSP Balancers with new tubs
(pictured here) and a revision J DAQ
board or newer. On DSP7705
balancers , the technician must lower
the lift manually since no hood is
present to trigger the lift to lower
automatically.
33.5 in
(851 mm)
Because of continuing technological advancements,
specications, models and options are subject to change
without notice.
Supersedes Form 6353-T, 06-11
Form 6353-T, 05-15
Copyright © 2015, Hunter Engineering Company
Loading...