Hunter 90405 Owner's Manual

Oscillating

Stand Fan

Owner’s Manual

English

Model

90405

Form# 44827-01 20100127

Table of Contents

Introduction 3

Safety and Warnings 3

Grounding 5

Unpacking 6

Base Assembly 6

Motor Assembly 7

Grill Assembly 8

Operation 10

Off / Speed Selection	10
Oscillation	10
Adjustment	10
Maintenance	11
Technical Support	12
Warranty	12
Products	14

44827-01 20100127

Introduction

Thank you for choosing the Hunter Oscillating Stand Fan. This manual gives you complete instructions for assembling and using your fan. Here are some the features you will enjoy with your fan:

33An attractive design that enhances any decor

33A powerful motor for maximum air flow

33Three speeds to adjust your comfort level

33All metal construction

33Parts of this fan, including the blades and the grill, have been treated with Hunter’s Dust Armor Protection, making them less likely to attract dust and dirt.

Safety and Warnings

To reduce the risk of fire or electrical shock, DO NOT use this fan with any solid-state speed control device. When using electrical appliances, basic precautions should always be taken to reduce the risk of fire, electric shock and personal injury:

Read all instructions before using this fan.

1.Improper installation may result in the risk of fire, electric shock or personal injury.

2.To prevent the risk of fire and electric shock, DO NOT use the unit near windows. Rain and moisture may create an electrical hazard.

3.The power plug must be removed from the power socket when not in use, before cleaning, servicing, maintenance and before moving to another location.

4.DO NOT put fan in a damp place or where humidity is high-such as a bathroom.

5.The fan should be placed on a flat, stable surface or tabletop to avoid overturning.

6.Use fan only for intended use, as described in this instruction manual.

7.To protect against electrical shock, DO NOT immerse unit, plug or cord in water or spray with liquids.

44827-01 20100127

8.Close supervision is necessary when any appliance is used by or near children.

9.NEVER insert fingers, pencils or any other objects through the grill when the fan is running.

10.DO NOT operate any appliance with a damaged cord or plug, after the appliance malfunctions or has been dropped or damaged in any manner.

11.To disconnect, grip plug and pull from wall outlet. NEVER yank on cord.

12.ALWAYS use on a dry surface.

13.This product is intended for household use only and not for commercial or industrial use.

14.DO NOT operate fan in the presence of explosive and/or flammable fumes.

15.DO NOT place fan or any parts near an open flame, cooking or any other heating appliances.

16.DO NOT use near curtains, plants, window treatments, etc.

17.This appliance has a grounded three-prong plug and is suitable for grounded receptacle use only. An adapter is available for connecting three-blade grounding-type plugs to two-slot receptacles. The adapter must be properly grounded. DO NOT attempt to defeat the purpose of this safely feature.

18.The rubber ring on this product may interact with wood and cause damage to furniture. Do not place on fine wood furniture.

44827-01 20100127

Grounding

This appliance is for household use only and may be plugged into any 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet.

Warning

This unit is suitable for grounded receptacle use only.

The power cord has a grounded plug as shown in Figure 1, and must be used with an electrical outlet that can accommodate the grounding pin. If your electrical outlet can not accommodate the grounding pin, then you must purchase and install one of the two types of adapters shown in Figure 2. NOTE: The adapters ARE NOT supplied with this fan. Read, follow, and save the instructions that are included with the adapter you choose. Do not use an adapter if your electrical outlet can accommodate the grounding pin. \

LINE CORD SAFETY TIPS

1.NEVER pull or yank on the cord or the appliance.

2.To insert plug, grasp it firmly and guide it into the outlet.

3.To disconnect the appliance, grasp the plug and remove it from the outlet.

4.Before each use, inspect the line cord for cuts and/or abrasion marks. If any are found, the appliance should be serviced and the line cord replaced. Please return it to our Service Department or to an authorized service representative.

5.NEVER wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and could cause it to fray and break.

6.DO NOT operate appliance if the line cord shows any damage, if the appliance works intermittently or stops working entirely.

Grounded

Plug

Grounding Pin

Grounded Outlet

Box Cover

Figure 1.

Adapter

Metal

Screw

Grounding	Grounded Outlet
Means	Box Cover

Figure 2.

44827-01 20100127

+ 9 hidden pages