Huffy isplay Unit User Manual

8/02 P/N 211432A

1

Customer Service Center

N53 W24700 South Corporate Circle

Sussex, WI 53089

U.S.A.

A Huffy Company

IMPORTANT!

We appreciate your purchasing one of our many fine products. We are sure that you will be very satisfied with your selection. Although
great care and effort have been taken, occasionally problems may occur. To ensure prompt and correct handling of any problems, or to
answer any questions, please contact the Sample and Display Technician at 414-820-3440 ext 401.

Display Unit for In-Ground Models

SAFETY INSTRUCTIONS

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY

RESULT IN SERIOUS INJURY,

PROPERTY DAMAGE AND WILL VOID WARRANTY.

This unit is intended for display purposes only and should

not be used for play.

To ensure safety, do not attempt to assemble this system without fol­lowing the instructions carefully. Before beginning assembly, read the
instructions and identify parts using the hardware identifier and parts
list in this document. Proper and complete assembly, use and supervi­sion is essential for proper operation and to reduce the risk of accident
or injury. A high probability of serious injury exists if this system is not
installed, maintained, and operated properly.

• Display must have a minimum of 369 lbs. (163.3 kg) of added ballast

located as shown in instructions to keep pole assembly upright.

• Backboard and rim assembly must be centered directly over base.

• During assembly, if using a ladder use extreme caution. Two people

are required for this procedure.

• Adjust leveling bolts to ensure a level display surface.

• If technical assistance is required, contact Huffy Sports’ Sample and

Display Technician.

• Minimum operational height is 6’6” (2 m) to the bottom of backboard.

Most injuries are caused by misuse and/or not following instructions.

Use caution when using this unit.

printed on recycled paper

WARNING

205920 3/98

9

2

P/N 211432A 8/02

5

6

Model

88350

Model

88346

Model

88169

3

4

360 LB. (163.3 KG)
MINIMUM WEIGHT

REQUIRED.

WARNING

2 OF 2

PART LIST

Item Qty. Part No. Description

1 4 203437 U-bolt
2 4 202460 Saddle Clamp
3 2 203469 U-bolt, Square
4 12 203309 Washer, 3/8
5 12 203017 Lock Nut, Hex, 1/2-13
6 1 206726 Base

2

Use same configuration
on model 88350.

1