Hubbell 31.320 User Manual
Hubbell Industrial Controls, Inc.
Mid-Size
Transmitter
Hubbell Radio Remote Control Systems
Spec Sheet 31.320 • May 2000 • New
Replaces Spec Sheet 31110 of March 95
The Hubbell Mid-Size Transmitter is for use
with Hubbell microcontroller receivers. It is
used for the remote control of overhead
cranes, locomotives and other moving
equipment. The transmitter is fully self
contained with battery, controller board, rf
board, antenna, switches and indicators in a
small, lightweight, rugged plastic case. The
transmitter is equipped with either a 72–
76␣ MHz or 450–470 MHz rf board and
antenna, per customer order.
Levers similar to a crane cab master controller
are provided for the control of bridge, trolley,
main hoist, and auxiliary hoist motions. Each
control switch has a positive detent
arrangement to provide operator feedback of
individual speed points. Additional toggle or
spring return switches, key switches or
pushbuttons can be provided for the control of
other functions such as horn, brakes, magnets,
tongs, etc. A Master Key Switch is provided
for turning battery power on and off to the
transmitter control circuit. A Run/Emergency
Stop toggle switch is provided for quick stop
in case of emergency. This switch must be in
the Run position for the transmitter to operate.
The battery is a 12 volt Ni-Cad module
having the capacity to power the transmitter
for two work shifts (20 hours) when fully
charged. It is easily removed for quick
recharging in the battery charger.
Each transmitter comes with a battery pack,
two keys for the Master Switch and a fully
adjustable shoulder harness.
HUBBELL
Transmitter Specifications
72 MHz Transmitters 450 MHz Transmitters
Frequency Range 72-76 MHz 406–430, 450–475 MHz
Channel Available per customer license per customer license
Frequency Stability -10 to 60° C ±5ppm ±5ppm
Emission Type 10KOFID 10KOFID
Spurious/Harmonic Output (below carrier) >70db >80db
Output to Antenna 300 mW 300 mW
Effective Radiated Power 3 mW 75 mW
Nominal Range (line of sight) 800 ft 1000 ft
FCC Identifier LRL922206-72 LRL922206-450
Canada Certificate Number 2259-203-224 2259-203-222
Voltage Requirement 12.5V dc ±15% 12.5V dc ±15%
Battery Usage 20 hrs 20 hrs
Recharge Time 8 hrs 8 hrs
Operating Temperature -22° F to 140°F -30° C to 60° C -22° F to 140°F -30° C to 60° C
Relative Humidity 20% to 90% non - condensing 20% to 90% non - condensing
LED Indicator Flashing: transmitting Flashing: transmitting Steady: low battery Flashing: transmitting Steady: low battery
Function Lever Switches 4 lever switches max. 4 lever switches max.
Auxiliary Switches 8 toggle sw./p.b. 8 toggle sw./p.b.
Weight with Battery 6.5 lbs. 6.5 lbs.
(low)
(low)
/ 250 mW
(low)
/ 1500 ft
(low)
/10 hrs
/ 1 W
(high)
(high)
(high)
(high)
A.HOIST
TROLLEY
10.82 [274.75]
10.59 [268.97]
HOIST
BRIDGE
4.89 [124.21]
1
2
8
3
7
4
6
5
CRANE
ADDRESS
SELECTOR SWITCH
7.38 [187.43]
6.30 [159.97]
BATTERY
HUBBELL
Hubbell Industrial
Controls, Inc.
a subsidiary of
Hubbell Incorporated
JPS-500-1M © 2000
Printed in U.S.A.
50 Edwards Street
Madison, Ohio 44057
(440) 428-1161
Fax (440) 428-7635
4301 Cheyenne Drive
Archdale, NC 27263
(336) 434-2800
Fax (336) 434-2801
http://www.hubbell-icd.com/radiocontrols/
Hubbell Industrial Control Solutions
Loading...