Hubbell 31.310 User Manual
Hubbell Industrial Controls, Inc.
Full-Size
Transmitter
Hubbell Radio Remote Control Systems
Spec Sheet 31.310 • May 2000 • New
This Hubbell portable transmitter is housed
in a light, rugged, weather proof plastic
case suitable for severe industrial
environments. The switches for control of
Bridge, Trolley and Hoist are reliable returnto-center devices with positive detents in all
positions. Up to five-speed, or stepless
reversing control of all motors can be
provided.
Auxiliary functions such as: horn, bridge
brake and magnet lift/drop are controlled
by high quality toggle switches with sturdy
operating handles. All switches are located
for ease of operation and identified on an
engraved legend plate.
The RF transmitter is crystal controlled and
all logic is handled by a microcontroller.
The antenna is completely enclosed within
the transmitter case.
The unit is powered by a rechargeable
12␣ volt nickel cadmium battery capable of
500 or more recharge cycles. The quick
disconnect battery module provides up to
5␣ shifts continuous service (40 hrs.) — more
in normal intermittent day to day operation.
A low battery LED indicator is provided. The
bench top charger will recharge a battery
within 8 hours.
A shoulder-type carrying harness is provided
which is adjustable over a wide range of
sizes to accommodate operator comfort and
clothing differences.
HUBBELL
Transmitter Specifications
72 MHz Transmitters 450 MHz Transmitters
Frequency Range 72-76 MHz 406–430, 450–475 MHz
Channel Available per customer license per customer license
Frequency Stability -10 to 60° C ±5ppm ±5ppm
Emission Type 10KOFID 10KOFID
Spurious/Harmonic Output (below carrier) >70db >80db
Output to Antenna 300 mW 300 mW
Effective Radiated Power 3 mW 75 mW
Nominal Range (line of sight) 800 ft 1000 ft
FCC Identifier LRL922206-72 LRL922206-450
Canada Certificate Number 2259-203-224 2259-203-222
Voltage Requirement 12.5V dc ±15% 12.5V dc ±15%
Battery Usage 40 hrs 60 hrs
Recharge Time 8 hrs 8 hrs
Operating Temperature -22° F to 140°F -30° C to 60° C -22° F to 140°F -30° C to 60° C
Relative Humidity 20% to 90% non - condensing 20% to 90% non - condensing
LED Indicator Flashing: transmitting Steady: low battery Flashing: transmitting Steady: low battery
Function Lever Switches 4 lever switches max. 4 lever switches max.
Auxiliary Switches 8 toggle sw./p.b. 8 toggle sw./p.b.
Weight with Battery 10 lbs. 10 lbs.
(low)
(low)
/ 250 mW
(low)
/ 1500 ft
(low)
/40 hrs
/ 1 W
(high)
(high)
(high)
(high)
10.00 [254.00]
5.50 [139.7]
SELECTOR SWITCH OPTIONAL
BATTERY
8.49 [215.65]
RUN
E. STOP
RF ON
BRIDGE
FWDREV
10.25 [260.35]
HOIST
REFER TO DRAWING 1-9447
BEFORE OPERATING XMTR
DNUP
DRAG
OFF
BATTERY
TROLLEY
CAUTION
A-HOIST
NOTICE
FWDREV
DNUP
TILTING
XMTR MORE
THAN 60fl
CAUSES
EMER STOP
HORN
HUBBELL
Hubbell Industrial
Controls, Inc.
a subsidiary of
Hubbell Incorporated
JPS-500-1M © 2000
Printed in U.S.A.
50 Edwards Street
Madison, Ohio 44057
(440) 428-1161
Fax (440) 428-7635
4301 Cheyenne Drive
Archdale, NC 27263
(336) 434-2800
Fax (336) 434-2801
http://www.hubbell-icd.com/radiocontrols/
Hubbell Industrial Control Solutions
Loading...