INSTALLATION INSTRUCTIONS
PENDANT MOUNT
FIXTURE SERIES: 22L
MOUNTING TYPE: PENDANT/WALL
PAGE: 1 OF 3
2.500
WALL MOUNT
STD CROSS SECTION
2.750
STD CROSS SECTION
LPA CROSS SECTION
2.750
LPA CROSS SECTION
2.500
5.124
2.500
2.750 .500
2.750 .500
NOTES:
READ ENTIRE INSTRUCTION SHEET BEFORE INSTALLATION.
1.
FIXTURES ARE SUPPLIED WITH FACTORY INSTALLED BRANCH CIRCUIT WIRING. REFER TO
2.
SUPPLEMENTAL INSTRUCTION SHEET FOR MAKING CONNECTIONS.
AIRCRAFT CABLES AND/OR WALL BOX ASSEMBLIES, AND ENDCAP KITS ARE SHIPPED
3.
SEPARATELY.
.875
.425
2.500
TOOLS REQUIRED
7/16" SOCKET/WRENCH (WALL MOUNT ONLY)
11/32" WRENCH/SOCKET OR PLIERS
3.280
2.874
7.000
SUPPLIED BY INSTALLER
R.117
R.219
litecontrol.com
DO NOT MODIFY OR ALTER THIS PRODUCT IN ANY WAY, OR INSTALL IN ANY FASHION WHICH IS CONTRARY TO THE INSTRUCTIONS CONTAINED HEREIN. IF
YOU HAVE ANY QUESTIONS REGARDING THIS PRODUCT OR THE INSTALLATION OF IT, PLEASE CALL LITECONTROL ENGINEERING AT 781-294-0100.
DRAWING: 510688
REV / DATE: 0 / 10/19/18
INSTALLATION INSTRUCTIONS
FIXTURE SERIES: 22L
MOUNTING TYPE: PENDANT
PAGE: 2 OF 3
1 2 3 4
ON BOTH SIDES OF FIRST FIXTURE IN ROW (OR INDIVIDUAL) INSTALL
SWAGES ON YOKES BY INSERTING INTO HOLES IN END HEADER
ALONG FIXTURE AXIS AND ROTATING UPWARDS
5 6
LOCATE AIRCRAFT CABLES ALONG A STRAIGHT LINE
IN CEILING PER DIMENSIONS SHOWN ON PAGE 1
(REFER TO INSTRUCTION SHEET 510481)
INSERT HERE AND ROTATE UP
REMOVE LED ASSEMBLY BY REMOVING
(6) #8 SHEET METAL SCREWS
INSTALL END CAP ON BEGINNING
OF ROW SIDE (OR BOTH SIDES OF
INDIVIDUAL FIXTURE) BY
INSERTING WELD STUDS INTO
PROPER HOLES (BE CAUTIOUS OF
LEFT HAND VS RIGHT HAND) AND
SECURING WITH #8-32 NUTS
PROVIDED IN END CAP KIT
(SHIPPED SEPARATELY)
RAISE FIXTURE UP AND INSTALL CABLE
HANGERS ONTO AIRCRAFT CABLE AND
MAKE WIRING CONNECTIONS
7
IF INSTALLING A ROW, JOIN FIXTURES
TOGETHER USING SCREWS IN HARDWARE KIT.
WIRING CONNECTIONS CAN GO THROUGH
BOTTOM HOLES IN END HEADERS
DO NOT MODIFY OR ALTER THIS PRODUCT IN ANY WAY, OR INSTALL IN ANY FASHION WHICH IS CONTRARY TO THE INSTRUCTIONS CONTAINED HEREIN. IF
litecontrol.com
YOU HAVE ANY QUESTIONS REGARDING THIS PRODUCT OR THE INSTALLATION OF IT, PLEASE CALL LITECONTROL ENGINEERING AT 781-294-0100.
REPEAT STEP 3 AND INSTALL END
OF ROW END CAP
RE-INSTALL LED
ASSEMBLY
DRAWING: 510688
REV / DATE: 0 / 10/19/18
Loading...