Hubbell Industrial Controls, Inc.
Push Button Elements 2040-1
Specification Sheet • March 1992 • New
Hubbell's 22.5mm oil-tight push buttons and selector
switches offer clean styling with simple installation.
Hubbell's push buttons are designed to save space in
modular designed panel installations. All of the devices
mount from the rear of panel in a 22.5mm (7/8") diameter
hole, and are secured from the front by an octagonal
mounting nut.
Hubbell's push button components are designed to be used
in the machine tool, food services and many heavy
industries. These components offer NEMA 4X rating for use
where corrosion resistance, water/oil/dust tight switching
mechanisms are required. Their simple standardized
mounting configuration makes them an excellent selection
for all kinds of equipment where panel mounting is
possible—indoor or outdoor.
Hubbell's push button switches allow for quick and easy
conversion of button/pilot colors and number of contacts;
allowing you to reduce the amount of component inventory
necessary for normal maintenance. In addition to the push
buttons and selector switches, Hubbell carries a complete
line of pendant stations, enclosures and other wiring devices
to complete your installation.
Specifications
International Standards/Approvals
UL Listed - File #EQ 545X
CSA Certified - Class #3211 03, File #47446
UL508, CSA 22.2, NEMA
Environmental and Operating Conditions
NEMA Type 1, 2, 3/3R, 4/4X, 12, 13 when mounted in
enclosure rated for those same applications.
Ambient Temperature Range
Operating: -4° F (-20° C) to +140° F (+60° C)
Storage: -40° F (-40° C) to +176° F (+80° C)
Contact Block Specifications
NEMA A600, A300, B300 for AC & P300 for DC ratings
UL486A & B - Terminal secureness test
Protected (shrouded) terminals
Positive drive operation on NC contacts
Terminal marking - US Standard (NEMA)
Contact Ratings
Description
Make & Emergency Interrupting Capacity 60.0 30.0 15.0 12.0 5.7 1.1 0.55
Normal Load Break 5.0 3.0 1.5 1.2 5.7 1.1 0.55
Continuous Amperes 10.0 10.0 10.0 10.0 5.0 5.0 5.0
Volt-amperes - Make & Emerg. Inter. Cap. 7200 7200 7200 7200 138 138 138
Volt-amperes - Normal Load Break 720 720 720 720 138 138 138
120V 240V 480V 600V 24/28V 125V 250V
Voltage AC Voltage DC
Page 1 of 4
Push Button Elements Specification Sheet 2040-1
Standard Pushbuttons
Hubbell's standard 22.5mm pushbuttons feature polyester construction for superior
corrosion resistance, and the #6 terminal screws have self-lifting captive wire
clamps to accommodate #22 through 2 - #12 wires per terminal. The pushbuttons
mount in a round 22mm or 7/8" hold and directly interchange with competitive
units. These pushbuttons are rated for NEMA 1, 2, 3/3r, 4/4X, 12 and 13
installations and are UL/CSA approved.
No. of
Speeds
One
One
One
One
One
One
Two
One
One
One
No. of Contacts
N.O. N.C.
1
1
1
1
0
1
1
2
2
2
1
1
1
0
1
0
1
2
2
2
Button
Color
Black
Red
Green
Black
Red
Green
Black
Black
Red
Green
Part
Number
2040-80320-100
2040-80320-101
2040-80320-102
2040-80320-103
2040-80320-104
2040-80320-105
2040-80320-110
2040-80320-400
2040-80320-401
2040-80320-402
Mushroom Head Pushbuttons
Hubbell's mushroom head pushbuttons are constructed to the same standards and
quality as the standard pushbuttons. Mushroom heads are available in black, red,
green, or a special "Stop" red. Mushroom caps are easily replaced or
interchanged in the field without special tools.
No. of
Speeds
One
One
One
One
One
One
One
One
No. of Contacts
N.O. N.C.
1
1
1
1
2
2
2
2
1
1
1
1
2
2
2
2
Button
Color
Black
Red
Green
"Stop" Red
Black
Red
Green
"Stop" Red
Part
Number
2040-80322-100
2040-80322-101
2040-80322-102
2040-80322-103
2040-80322-400
2040-80322-401
2040-80322-402
2040-80322-403
Page 2 of 4
Maintained Pushbuttons
Hubbell's maintained pushbuttons are available in two variations. Single button
mushroom head "push-pull" units are stand alone buttons that are commonly used
for a maintained "emergency stop" function which has "push-to-stop/push-to-start"
operation. Single maintained buttons are used with another operator and an MRI
"maintained reset interlock" to provide two button operations for either
"maintained/maintained" or "maintained/momentary" action.
No. of
Speeds
"Push-Pull"
"Push-Pull"
"Push-Pull"
Button
Button
Button
No. of Contacts
N.O. N.C.
1
1
1
1
1
1
1
1
1
1
1
1
Button
Color
Black
Red
Green
Black
Red
Green
Part
Number
2040-80323-100
2040-80323-101
2040-80323-102
2040-80323-103
2040-80323-104
2040-80323-105
Push Button Elements Specification Sheet 2040-1
Selector & Toggle Switches
Hubbell's selector switches are available in 2 or 3 position maintained or spring
return operators. Hubbell also has a 2-position toggle switch that is rated at 10
amps.
Circuits Type of Return
ÉÇÊ
X
O
XOXXO
X
O
O
X
O
O
XOOOO
Operator
OXSelector
Toggle
SelectorMMM
X
O
O
SelectorMMM
X
Selector
Selector
X
Selector
Selector
ÉÇÊ
M
M
M
S
S
M
M
M
M
M
M
M
M
S
M
S
Part
Number
2040-80321-100
2040-80321-101
2040-80321-301
2040-80321-302
2040-80321-303
2040-80321-304
2040-80321-305
2040-80321-306
Illuminated Pilot Lights
Hubbell's pilot lights are available in either 120V AC/DC or 250V AC/DC and are
constructed to the same standards and quality as the pushbuttons. The pilot light
bulb and lenses are easily removed for maintenance. Additional color lenses are
available.
Type of
Bulb
Neon
Neon
Neon
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Voltage
AC/DC
120V
120V
120V
120V
120V
120V
250V
250V
250V
Lens
Colors
Red
Amber
Green
Red
Amber
Green
Red
Amber
Green
Part
Number
2040-80324-100
2040-80324-101
2040-80324-102
2040-80324-210
2040-80324-211
2040-80324-212
2040-80324-213
2040-80324-214
2040-80324-215
Two Button - Five Speed Element
Hubbell's two button - five speed element is specifically designed to meet the most
severe conditions. The two buttons are mechanically interlocked which prevents
both buttons from being depressed simultaneously. These switches are ideal for
pendant or other control applications that require multi-speed operation.
No. of
Speeds
Five
*CSA Approved
Page 3 of 4
No. of
Contacts
6-NO/Button
Sequentially
Closed
Button
Color
Black 2040-80825-000*
Part
Number
Push Button Elements Specification Sheet 2040-1
Accessories
Rubber Boots &
Mushroom Caps
Hubbell has a large assortment
of replacement boots, buttons,
push-pull caps, and mushroom
caps in red, green, yellow and
black. They also have
specially marked "Stop" caps.
Pilot Light Lenses/Bulbs
Hubbell has red, amber, green,
white, blue, and clear pilot light
lenses that are interchangeable with the original lenses.
They also have replacement
incandescent and neon bulbs.
Cord Connector Kits
Hubbell has the patented
Gotcha
cord like a vise when the fitting
is tightened. With the addition
of the neoprene brushing,
Hubbell's connectors are
unsurpassed in liquid-tight
performance and pull-out
protection.
Name Plates
Hubbell has nameplates made
from chemically resistant fiber.
They are available as blanks or
with special engravings.
Dimensional Illustrations
®
Ring that grips the
Nut Wrenches
Hubbell has nut wrenches
specifically designed to simplify the installation of pushbuttons and selector switches,
even those with mushroom
heads.
Add-A-Block Contacts
Hubbell has Add-A-Block contacts, which can add additional
circuits to a 22mm pushbutton.
With the addition of an Add-ABlock it is possible to construct
pushbuttons with a total of six
circuits. Available in 2-NO, 2NC and NO/NC combinations
schemes.
Hubbell Industrial Controls, Inc.
A subsidiary of Hubbell Incorporated
4301 Cheyenne Dr., Archdale, NC. 27262
Telephone (336) 434-2800 • FAX (336) 434-2803
http://www.hubbell-icd.com
Sales@hubbell-icd.com
Loading...