Huawei Watch Fit 2 User guide

Download

Page 1

WATCH FIT 2

User Guide

Page 2

Getting Started

Powering on/Powering o/Restarting Buttons and screen control Icons Pairing and connecting to wearable devices Charging Locking or unlocking Setting grid layout on the home screen Adjusting the screen brightness Changing watch faces Receiving weather reports Setting an alarm Message management Setting favorite contacts Incoming call notications Unknown caller display Bluetooth voice calling Viewing call logs Voice assistant

Exercise

Starting an individual workout Linking for a single workout Automatic workout detection Viewing workout records Viewing daily activity data Running courses Creating a training plan Enabling Smart Trainer or Smart companion Viewing the RAI Workout status Route back Routes

Health Management

Measuring your heart rate Heart rate limit warning High heart rate alert Low heart rate alert HR Data Broadcasts Breathing exercises

Page 3

Assistant

Stress test Activity reminder Menstrual cycle predictions Measuring blood oxygen levels (SpO2) Sleep monitoring Sleep apnea detection Heart Study Healthy Living

Contents

Apps HUAWEI Assistant∙TODAY Setting the vibration strength Conguring Gallery watch faces Setting the AOD watch face OneHop Watch Faces Alipay Bank card payment Transportation cards Simulating physical access cards Smart Swipe Setting the time and language Stopwatch Timer Flashlight Compass Finding your phone using your watch Finding your watch using your phone Remote shutter Music

Do Not Disturb Adding custom cards Adjusting and replacing the strap Updating the watch Viewing the Bluetooth name, MAC address, SN, model, and version number Restoring your device to its factory settings Water and dust resistance One-touch drainage Statement for devices supporting micropower frequency bands

Page 4

Getting Started

Powering on/Powering o/Restarting

Powering on

• Press and hold the side button to power on the device.

• Charge the device.

Powering o

• Press the side button, and go to Settings > System & updates > Power o.

• Press and hold the side button, then select Power o.

The device will automatically power o when the battery is drained. Charge the device in a timely manner.

Restarting

• Press the side button, and go to Settings > System & updates > Restart.

• Press and hold the side button, then touch Restart.

• Press and hold the side button for more than 8 seconds to forcibly restart your device.

Buttons and screen control

• You can swipe up, down, left, or right, as well as touch and hold the screen to perform

operations .

1: Air pressure hole 2: Side button 3: Audio hole 4: Supert button 5: Monitoring unit area 6: Microphone 7: Charging port

Page 5

Operation Function Note

Getting Started

Press the side button.

Press and hold the side button.

Swipe left or right on the home screen.

• When the screen is o, press the side

button to turn on the screen.

• When the watch face screen is displayed,

press the side button to access the app list screen.

• When a non-watch face screen is

displayed, press the side button to return to the watch face screen.

Wake up the voice assistant. -

Power on, power o, and restart. -

Switch between screens. -

This feature is unavailable in some scenarios, including when an incoming call arrives, during calls and workouts.

Swipe right on a screen other than the home screen.

Swipe up on the home screen.

Swipe down on the home screen.

Touch the screen.

Touch and hold the home

Return to the previous screen. -

Check messages. -

Go to shortcuts such as Settings, One-touch drainage, Alarm, Find Phone, Screen on, and Do Not Disturb.

Select and conrm. -

Change the watch face. -

screen.

Icons

Icons may vary depending on the product model.

Level-1 Menu

Page 6

Getting Started

Remote

shutter

Workout

records

Workout

status

Breathing

exercises

SpO2 Activity

records

Sleep Stress Heart rate Music Workout Notications

Weather Cycle Calendar Settings Stopwatch Timer Alarm

Flashlight Find Phone Alipay Wallet -- --

Contacts Call log Healthy Living Compass -- --

Level-2 Menu

Steps Activity Hours active

Shortcuts

Settings Alarm Screen on

Find Phone Do Not Disturb Drain

Bluetooth connection status

Page 7

Getting Started

Disconnected from the

phone's Bluetooth and the

Huawei Health app

Connected to the phone's

Bluetooth and the Huawei

Health app

Pairing and connecting to wearable devices

Ensure that your phone meets all the following requirements:

• Download and install the latest version of the Huawei Health app.

• Bluetooth and location services are enabled on your phone, and the Huawei Health app is

authorized to access your phone's location.

When you power on your device for the rst time or pair it after a factory reset, you will be prompted to select a language before pairing.

Installing the Huawei Health app

Before pairing, download and install the Huawei Health app on your phone. If you have installed the Huawei Health app, update it to the latest version.

• HUAWEI phones

The Huawei Health app is installed on your phone by default. If you are unable to nd this app on your phone, you can download and install it from AppGallery.

• Non-HUAWEI Android phones

If you are using a non-HUAWEI Android phone, you can download and install the Huawei Health app through either of the following ways:

• Visit Download the Huawei Health app, or scan the following QR code to download and

install the Huawei Health app.

• Search for the Huawei Health app in the app store on your phone, and follow the

onscreen instructions to download and install the app.

• Visit Download HUAWEI AppGallery to download and install HUAWEI AppGallery.

Search for the Huawei Health app on HUAWEI AppGallery, and follow the onscreen instructions to download and install the app.

• iPhones

Search for the HUAWEI Health app in the App Store, and follow the onscreen instructions to download and install the app.

Page 8

Getting Started

For details about how to register a HUAWEI ID on a non-HUAWEI third-party phone, refer to Registering a HUAWEI ID.

Pairing and connecting to wearable devices

To protect your privacy, your watch will need to be restored to its factory settings in certain scenarios (subject to the onscreen instructions) when it connects to a new phone. Restoring the watch to its factory settings will clear all data from the device. Please exercise caution when performing this operation.

• HUAWEI/Non-HUAWEI Android phones

1 After the device is powered on, select a language. Bluetooth is ready for pairing by

default.

2 Place the device close to your phone, open the Huawei Health app on your phone,

touch

scan for available devices. Select the device you wish to pair with, and touch LINK.

You can also touch display Pairing….

in the upper right corner, and then touch ADD. Your phone will automatically

> SCAN to scan the onscreen QR code. Your phone will then

3 When a pairing request is displayed on the device screen, touch √, and follow the

onscreen instructions to complete the pairing.

• iPhones

1 After the device is powered on, select a language. Bluetooth is ready for pairing by

default.

2 Follow the onscreen instructions to go to Settings > Bluetooth and select your device

for pairing. Once a pairing request is displayed on the device screen, touch √.

3 You can place your device close to your phone, open the Huawei Health app on your

phone, touch in the upper right corner, touch ADD, and then follow the onscreen instructions to select your device from the pop-up window.

Or you can open the Huawei Health app on your phone, touch corner, and then touch SCAN to scan the QR code on your device. On your phone, follow the onscreen instructions and touch Yes > Next.

in the upper right

4 When a pop-up window on your phone requests a Bluetooth pairing via the Huawei

Health app, touch Pair. Another pop-up window will display, asking you whether to allow the device to display phone notications. Touch Allow.

5 Wait for several seconds until the Huawei Health app displays a message indicating that

the pairing is successful. Touch Done to complete the pairing.

Pairing and connecting in other scenarios

• If the device is going to be paired with a dierent HUAWEI ID in the Huawei Health app,

you'll need to go to Settings > System & updates > Reset on the device, and then select √ to complete the pairing.

Page 9

Getting Started

• If the connection failed and cannot be automatically reconnected, or you'd like to use

another phone for pairing, you'll need to go to Settings > System & updates > Disconnect on the device, and then select √ to complete the pairing.

If you are using an iPhone, it is recommended that you ignore or delete the Bluetooth connection records on your phone and unlink your wearable device in the Huawei Health app. To ignore or delete the Bluetooth connection records on your phone, go to Settings

> Bluetooth, touch with your phone, and select Forget this device. (You need to ignore and delete the pairing record twice.) To unlink your wearable device, open the Huawei Health app, go to the Devices

screen, and touch

next to the Bluetooth name of the device that has been paired

> Unpair device in the upper right corner.

Charging

Connect the metal contacts on the charging cradle to those on the back of your device, place them on a at surface, and connect the charging cradle to a power supply. The screen will turn on and display the battery level.

Page 10

Getting Started

• The charging cradle is not water-resistant. Make sure that the port, the metal contacts,

and your device are dry during charging.

• Do not charge or use your device in a hazardous environment, and make sure that

there is nothing ammable or explosive nearby. Before using the charging cradle, make sure there is no residual liquid or any other foreign objects on the USB port of the charging cradle. Keep the charging cradle away from liquids and ammable materials. Do not touch the metal contacts of the charging cradle when it is connected to a power supply, to avoid potential safety hazards.

• The charging cradle has a magnet inside. If the magnet repels the charging port, switch

the direction of the charging port. The charging cradle's magnetism tends to attract metal objects. It is recommended that you check and clean the charging cradle before use.

• Do not expose the charging cradle to high temperatures for an extended period of

time, or to sources with strong electromagnetic interference, as this may cause it to demagnetize or cause other issues.

Viewing the battery level

Swipe down on the device's home screen to check the battery level. Alternatively, open the Huawei Health app, touch Devices, and check the battery level under the device's name.

Locking or unlocking

You can set a PIN on the device to bolster your privacy. After you have set a PIN and enabled Auto-lock, you will need to enter the PIN to unlock the device and enter the home screen.

Setting a PIN

1 Set a PIN.

Swipe down on the home screen of the device, go to Settings > PIN > Enable PIN, and follow the onscreen instructions to set a PIN.

2 Enable Auto-lock.

Swipe down on the home screen of the device, go to Settings > PIN, and enable Auto- lock.

If you forget the PIN, you will be required to restore the device to its factory settings.

Changing the PIN

Swipe down on the home screen of the device, go to Settings > PIN > Change PIN, and follow the onscreen instructions to change the PIN.

Disabling the PIN

Swipe down on the home screen of the device, go to Settings > PIN > Disable PIN, and follow the onscreen instructions to disable the PIN.

Page 11

Getting Started

Forgot the PIN

If you have forgotten the PIN, restore the device to its factory settings and try again.

• Method 1: Open the Huawei Health app, touch Devices and your device name, and then

select Reset.

• Method 2: If you've enter an incorrect password for ve times, touch Reset at the bottom

of the device screen, or press and hold the side button to restore the device to its factory settings.

Once you have restored your device to its factory settings, all of your data will be cleared, so please exercise caution when performing this operation. If you have added a transportation card or an access card to the device, the data of the card will be deleted once you have restored the device to its factory settings.

Setting grid layout on the home screen

Go to Settings > Watch face & home > Home, and select Grid to display the apps on the home screen in grid view or select List to display the apps as a list.

Adjusting the screen brightness

1 Access the app list on your device, and go to Settings > Display & brightness or Settings

> Display.

2 If Automatic is enabled, disable it. 3 Touch Brightness to adjust the screen brightness.

Changing watch faces

Before using this feature, update the Huawei Health app and your device to their latest versions.

• Method 1: Touch and hold anywhere on the home screen until the device vibrates. When

the home screen zooms out and shows a preview, swipe left or right to select your preferred watch face and install it.

• Method 2: Go to Settings > Watch face & home > Watch face. Swipe left or right on the

screen to select your preferred watch face and install it.

• Method 3: Ensure that your device is connected to the Huawei Health app. Open the

Huawei Health app, go to Watch Face Store, select More, and touch INSTALL under your preferred watch face. The device will automatically install and switch to your chosen watch face. Alternatively, touch a watch face that you have installed, then touch SET AS DEFAULT to switch to it.

Deleting a watch face:

Page 12

Getting Started

• Open the Huawei Health app, go to Watch Face Store, and select More > Mine > Edit.

Touch the cross icon in the upper right corner of a watch face to delete it.

• Touch and hold anywhere on the home screen until the device vibrates. When the home

screen zooms out and shows a preview, swipe left or right to select the watch face you'd like to delete, swipe up on the screen, and touch Remove.

Receiving weather reports

Enabling Weather reports

Open the Huawei Health app, enable Weather reports on the device details screen, and select your preferred temperature unit (°C or °F).

Viewing weather information

Method 1: On the Weather card

Swipe right on the screen until you nd the Weather card, where you can check your location, the weather, temperature, air quality, and more.

Method 2: In the Weather app

On the home screen, press the side button and select Weather. You can view information such as your location, the weather, temperature, air quality, and outdoor environment on the screen. Swipe up or down on the screen to view weather forecasts for dierent times throughout the day, and for the next six days.

Method 3: On a watch face that can display the weather

Set a watch face that can display the weather. Once this is set, you will be able to see the latest weather report on the home screen.

Setting an alarm

Method 1: Set an alarm on your device.

1 Enter the app list, select Alarm, and touch

to add an alarm.

2 Set the alarm time and repeat cycle and then touch OK. If you do not set the repeat cycle,

the alarm will be a one-time alarm.

3 You can touch an alarm to delete it or modify the alarm time, tag, and repeat cycle. Only

event alarms can be deleted.

Method 2: Set an alarm in the Huawei Health app.

Event alarm:

1 Open the Huawei Health app, touch Devices then your device name, and go to Alarm >

EVENT ALARM.

2 Touch Add at the bottom to set the alarm time, tag, and repeat cycle.

Page 13

Getting Started

3 Touch √ in the upper right corner (for ) or touch Save (for ) to nish conguring the

settings.

4 Return to the home screen and swipe down to sync the alarm settings to your device. 5 Touch an alarm to delete it or modify the alarm time and repeat cycle.

• Alarms are synced between your device and the Huawei Health app.

• When the alarm vibrates, touch

device to snooze (for 10 minutes). Touch its own if no other operations are performed for one minute or the alarm has snoozed on its own three times.

, then swipe right or press the side button of your

to stop the alarm. The alarm will stop on

Message management

When the Huawei Health app is connected to your device, and the message notications are enabled, messages pushed to the status bar of your phone can be synced to your device.

Enabling message notications

1 Open the Huawei Health app, touch Devices and then your device name, touch

Notications, and turn on the switch.

2 Go to the app list and turn on the switches for apps that you want to receive notications

from.

You can go to Apps to view the apps that you can receive notications from.

Viewing unread messages

Your device will vibrate or ring to notify you of new messages pushed from the status bar of your phone.

Unread messages can be viewed on your device. To view them, swipe up on the home screen to enter the unread message center.

Replying to messages

This feature is not supported for iOS phones.

When receiving a message on your watch, you can swipe up on the screen and select a quick reply.

Customizing quick replies

This feature is not supported for iOS phones.

You can customize a quick reply as follows:

1 Connect your device to the Huawei Health app, open the devices details screen, and touch

the Quick replies card.

Page 14

Getting Started

2 You can touch Add reply to add a reply, touch an added reply to edit it, and touch

next to a reply to delete it.

Deleting unread messages

Touch Clear or

at the bottom of the message list to clear all unread messages.

Setting favorite contacts

1 Open the Huawei Health app, touch Devices and your device name, then select Favorite

contacts.

2 On the Favorite contacts screen:

• Touch ADD to display your phone's contacts list and then select the contacts you wish

to add.

• Press the Down button that has been customized, and touch Sequence to sort the

contacts you have added.

• Touch Remove to remove a contact you have added.

3 Touch a favorite contact from Favorite contacts in your watch's app list to call the

contact's number on your watch.

Incoming call notications

Make sure that your device is connected to your phone and worn correctly on your wrist. The screen will turn on and the device will vibrate or ring when there is an incoming call. You can reject the call or send a quick reply on your device.

• The quick reply feature is not supported for iPhones.

• If you aren't wearing the device, or Do Not Disturb is enabled and the screen is o, the

device will receive the incoming call, but the screen will not turn on, and the device will not vibrate.

• If an incoming call is missed, the screen will turn on, and the device will vibrate to

notify you of the missed call.

Unknown caller display

• This feature is only supported on HUAWEI phones.

• Make sure that your device is paired with the Huawei Health app.

When you receive a call from an unknown number, you can tag the number in the call log, for example, express delivery, take-out, or harassment. If that number calls again, the tag will display alongside the phone number.

Page 15

Getting Started

Bluetooth voice calling

To use this feature, ensure that your device is paired and connected to the Huawei Health app.

To make a call: Go to the app list on your device, select Favorite contacts or Call log, and select the contact that you would like to call.

To answer a call via Bluetooth: When there is an incoming call on your phone, you will receive an incoming call notication on your device. Touch on your device to answer the call. After the call is answered, the audio will come from the device's speaker.

Viewing call logs

Viewing your call logs

Press the Up button on your device to access the app list, swipe up or down until you nd Call log, and touch it to view call logs (including incoming, outgoing, and missed calls) on your device.

Calling back

When your device is paired with your phone, touch any call record to call back.

Deleting call logs

Swipe down to the bottom of the screen and touch Clear or to clear all call logs.

Voice assistant

Ensure that you are using a HUAWEI phone running EMUI 10.1 or later, and have installed the latest version of the Huawei Health app.

Connect the device to your phone via the Huawei Health app, and then press and hold the side button to activate the voice assistant.

The voice assistant supports the following features:

1 Controlling local apps: Set an alarm, set a timer, start a count down, play music, measure

your heart rate, and start a workout.

2 Finding information: View the weather, air quality, encyclopedia, and world clock, translate

from one language to another, perform digital computing, tell jokes, tell stories and view constellations.

3 Controlling the smart appliances linked to the AI Life app.

Page 16

Exercise

Starting an individual workout

Starting a workout using the device

1 On the device, enter the app list and touch Workout. 2 Swipe up or down on the screen and select the workout you want to do. 3 Touch a workout icon to start a workout. 4 When the screen is on, press and hold the side button to stop the workout. Alternatively,

press the button to pause the workout, touch to stop the workout.

• Touch to set goals, reminders, and more.

• After you start running, cycling, swimming, or jump roping, touch

and follow the onscreen instructions to warm up.

• Go to Workout settings and enable Always on, and your device screen will be

steady on when you are working out.

• After the workout is nished, you can view the workout data including the workout

time, calories, heart rate graph, heart rate range, average heart rate, and heart rate zone.

Starting a workout using the Huawei Health app

to resume the workout, or touch

> Warm up

1 Select the workout you want to record on the Exercise screen in the Huawei Health app. 2 Touch the start icon to start the workout. 3 After a workout ends, touch the pause icon, then touch and hold the end icon, and select

END to end the workout.

Linking for a single workout

After your device is paired with the Huawei Health app, the device will automatically start, pause, resume, or end the workout (such as a single workout or a training course) that you start, pause, resume, or end in the Huawei Health app.

During a workout, the device and the Huawei Health app can respond synchronously when you pause, resume, or end the workout.

Page 17

Exercise

Automatic workout detection

Go to Settings > Workout settings and enable Auto-detect workouts. After this feature is enabled, the device will remind you to start a workout when it detects increased activity. You can ignore the notication or choose to start the corresponding workout.

• The supported workout types are subject to the onscreen instructions.

• The device will automatically identify your workout mode and remind you to start a

workout if you meet the requirements based on the workout posture and intensity and stay in this state for a certain period of time.

• If the actual workout intensity is lower than that required by the workout mode for a

certain period of time, the device will display a message indicating that the workout has ended. You can ignore the message or end the workout.

Viewing workout records

Viewing workout records on the device

1 On the device, enter the app list and touch Workout records. 2 Select a record and view the corresponding details. The device will display dierent data

types for dierent workouts.

After completing a workout, such as running, cycling, swimming, or jump rope, touch Workout records > Stretch, and then demos will be displayed to show you how to stretch your body.

Viewing workout records in the Huawei Health app

You can also view detailed workout data under Exercise records on the Health screen in the Huawei Health app.

Deleting a workout record

Touch and hold a workout record on Exercise records in the Huawei Health app and delete it. However, this record will still be available in Workout records on the device.

Viewing daily activity data

If you are wearing the device properly, the device will record your activity automatically, including the step count, active distance, and calories burned.

Method 1: View your activity data on the device.

On the device, enter the app list and touch Activity records. You can then view your data including the step count, calories burned, distance covered, active hours, and the duration of moderate to high intensity activities.

Method 2: View your activity data in the Huawei Health app.

Page 18

Exercise

You can view your activity records on the home screen of the Huawei Health app or on the device details screen.

• To view your daily activity data in the Huawei Health app, make sure that your device

is connected to the Huawei Health app.

• Your activity data resets at midnight.

Running courses

Your device comes with a variety of running courses that can guide you and record your workouts, helping you to stay more active each day.

1 On the device, enter the app list and touch Workout. 2 Select Courses and plans > Running courses > Preset courses. 3 Choose a course and follow the onscreen instructions to start the workout.

Custom running courses

1. Make sure that your device is paired with the Huawei Health app. Open the Huawei Health app, go to Exercise > Outdoor run > Recommended courses. Swipe left on the screen, and touch Custom > New. You can then choose Add round and Add movement to set a specic course, and touch √ in the upper right corner to complete the settings.

2. On the screen with the details of your custom running course, touch START to start the workout in the app.

On the screen with the details of your custom course, touch the device icon in the upper right corner to sync the customized course to your device. Select the corresponding course on the device, and start it by following onscreen instructions.

3. On the screen with the details of your custom course, touch display a menu. Select Edit course to edit the course, Copy course to copy the course, or Delete course > OK to delete the course.

in the upper right corner to

Creating a training plan

• To create a training plan, pair your device with the Huawei Health app rst.

• Running plans can only be created and started using the Huawei Health app. To create

a new plan, terminate the existing plan rst.

1 Create a training plan in the Huawei Health app: Open the Huawei Health app, go to

Exercise > Outdoor run > Running plans or Exercise > Indoor run > Running plans,

select a training plan, and follow the onscreen instructions to create it.

2 Sync the training plan to your device: Once the training plan has been created, it will

automatically be synced to your device and your device will vibrate.

Page 19

3 Share, view, edit, and terminate the training plan: When a training plan is created, the

Exercise

Plan option is displayed in the app, on the upper part of the Exercise screen. Touch the upper right corner and select Share to share the plan; touch View plan to view the details of your training plan; touch Plan settings to change the training day and reminder time, and enable Sync to Calendar; touch Sync to wearable device to sync the plan to your device; touch Terminate plan > OK to terminate the plan.

Enabling Smart Trainer or Smart companion

Enabling Smart Trainer

After Smart Trainer is enabled on your watch, your watch will send you real-time voice guidance during a running session.

1 Press the Up button to access the app list, and swipe up or down to nd and touch

Workout.

2 Touch the Settings icon to the right of Outdoor run and enable Smart Trainer. 3 Return to the app list, touch Outdoor run, wait until GPS positioning is complete, and

touch the Run icon to start running.

• Smart Trainer is currently only available for Outdoor run.

• After Smart Trainer is enabled, you will be able to get real-time voice guidance when

you are running. Smart Trainer has replaced the functions of Goals, Reminders, and Smart companion.

Enabling Smart companion

After Smart companion is enabled, you can view how much you have exceeded or fallen behind the target pace in real time during an outdoor workout.

1 Press the Up button to access the app list and touch Workout. 2 Touch the Settings icon to the right of Outdoor run and enable Smart companion. 3 Touch Target pace to customize a target running pace. 4 Return to the app list, touch Outdoor run, wait until GPS positioning is complete, and

touch the Run icon to start running.

When you are running outdoors, Smart Trainer and Smart companion can't be selected at the same time.

Viewing the RAI

Running Ability Index (RAI) is a comprehensive index that reects a runner's endurance and technique eciency. It is based on a runner's best times. In general, a runner with a higher RAI performs better in competitions.

Page 20

Exercise

Before you start

• To use this feature, update the device and the Huawei Health app to their latest versions.

• The RAI feature is only available for outdoor running and running courses that last for

more than 12 minutes. Indoor running is not supported.

Viewing the RAI

• On the device:

1 Go to Settings > Watch face & home > Home, and select Grid to display the apps in

grid view.

2 Touch

• Phone:

to view the RAI.

Open the Huawei Health app, go to Exercise > Outdoor run > Total distance run (km), select a running record, and touch Graph to view your tness data such as RAI, pace zone, and training load level.

Workout status

Enter the watch's app list, touch Workout status, and swipe up on the screen to view data including your recovery status, training load, and VO2Max.

• Your training load from the last seven days can be viewed to determine your level based on

your tness status. The watch collects your training load from workout modes that track your heart rate.

• VO2Max data can be obtained from outdoor running workouts.

Route back

When you start an outdoor workout and enable the Route back feature, the device will record the route you took and provide you with navigation services. After reaching your destination, you can use this feature to nd out how to return to where you passed through or came from.

On your device, enter the app list, then swipe until you nd Workout and touch it. Start an individual outdoor workout session. Swipe left on the screen and select Route back or Straight line to return to the starting point. If there is no Route back or Straight line on the screen, touch the screen to display it.

Page 21

Exercise

Routes

• You can export your workout routes and share them with your friends, so that they can

use the same routes for workout.

• This feature is only available for outdoor running, cycling, and walking.

Exporting workout routes

1 Open the Huawei Health app, enter the Exercise screen, touch Total distance run, Total

distance cycled, or Total distance walked to view the corresponding outdoor workout

record, and select it.

2 On the Route screen, touch the route icon

OK to save the route.

on the right, select Save to My routes >

3 On the Route screen, touch the route icon on the right, and select Export route >

OK. After selecting the export method, you can transfer the route le to friends or save it

to the device.

Importing workout routes

1 After receiving a route, the friend can touch to save it to their device. 2 Your friend can swipe up on the Me screen in the Huawei Health app, select My route,

and touch Import route in the lower right corner to import the workout route.

Syncing routes to the wearable device

1 Open the Huawei Health app, swipe up on the Me screen, and select My route. Select a

route, touch in the upper right corner, and select Send to wearable.

2 Go to outdoor workout settings on the device, touch Routes, and follow the onscreen

instructions to use the route for navigation.

Deleting routes

• Open the Huawei Health app, swipe up on the Me screen, and select My route. Select a

route, touch in the upper right corner, and select Delete route to delete the route.

• Go to outdoor workout settings on the device, touch Routes, touch and hold the route you

want to delete, and touch Delete.

Page 22

Health Management

Measuring your heart rate

• This measurement may also be aected by some external factors such as low ambient

temperatures, arm movements, or tattoos on your arm.

• Keep still and make sure the device ts relatively tightly during the measurement, but

avoid wearing it directly over your wrist bone. Ensure that the heart rate sensor is in contact with your skin and that there are no foreign objects between your skin and the device. The screen also needs to stay facing up.

Individual heart rate measurement

1 Open the Huawei Health app, touch Devices then your device name, go to Health

monitoring > Continuous heart rate monitoring, and disable Continuous heart rate monitoring.

2 On the device, enter the app list and select Heart rate to measure your heart rate.

Continuous heart rate measurement

1 Open the Huawei Health app, touch Devices then your device name, go to Health

monitoring > Continuous heart rate monitoring, and enable Continuous heart rate monitoring.

2 View your heart rate:

• On the device, enter the app list and select Heart rate to view your heart rate.

• Open the Huawei Health app, go to Me > My data > HEALTH MEASUREMENTS >

Heart, and view your heart health data.

Resting heart rate measurement

The resting heart rate refers to the heart rate measured in a quiet, inactive, and non-sleep state. The best time to measure the resting heart rate is after you wake up (and before getting up) in the morning.

1 Open the Huawei Health app, touch Devices then your device name, go to Health

monitoring > Continuous heart rate monitoring, and enable Continuous heart rate monitoring. The device will then measure your resting heart rate automatically.

2 Open the Huawei Health app, go to Me > My data > HEALTH MEASUREMENTS > Heart

> Resting heart rate, and view your resting heart rate at a specic time or average resting heart rate.

The resting heart rate data displayed in the Huawei Health app will not change after you disable Continuous heart rate monitoring.

Page 23

Health Management

Heart rate measurement for a workout

During a workout, the device displays your real-time heart rate and heart rate zone, and noties you when your heart rate exceeds the upper limit. For better training results, you are advised to do a workout based on your heart rate zone.

• Heart rate zones can be calculated based on the maximum heart rate percentage or HRR

percentage. To choose the calculation method, open the Huawei Health app, go to Me > Settings > Workout settings > Exercise heart rate settings and set HEART RATE ZONES to Maximum heart rate percentage or HRR percentage.

• Heart rate measurement during a workout: You can view the real-time heart rate on the

device when you start a workout.

• After completing your workout, you can check your average heart rate, maximum

heart rate, and heart rate zone on the workout results screen.

• Your heart rate will not be displayed if you remove the device from your wrist during

the workout. However, it will continue to search for your heart rate signal for a while. The measurement will resume once you put the device back on.

Heart rate limit warning

During a workout, if your heart rate exceeds the preset upper limit for a certain period of time, your device will vibrate and notify you that your heart rate is too high, until your heart rate drops below the upper limit or you swipe right to clear the notication.

Perform the following to set a heart rate upper limit:

• iOS users: Open the Huawei Health app, go to Me > Settings > Exercise heart rate

settings, enable Heart rate limit warning, touch Heart rate limit, and set an upper limit

that is suitable for you.

• HarmonyOS/Android users: Open the Huawei Health app, go to Me > Settings > Workout

settings > Exercise heart rate settings, touch Heart rate limit, and set an upper limit that

is suitable for you.

Heart rate alerts are only available during workouts and are not generated during daily monitoring.

High heart rate alert

If you aren't resting for 30 minutes and your heart rate stays above the set limit for over 10 minutes, the device will vibrate and display a message letting you know that your heart rate is too high. You can swipe right on the screen or press the side button to clear the message.

Perform the following to enable High heart rate alert:

1 Open the Huawei Health app, touch Devices then your device name, go to Health

monitoring > Continuous heart rate monitoring, and enable Continuous heart rate monitoring.

Page 24

Health Management

2 Touch High heart rate alert and set a limit.

Low heart rate alert

If you aren't resting for 30 minutes and your heart rate stays below the set limit for over 10 minutes, the device will vibrate and display a message letting you know that your heart rate is too low. You can swipe right on the screen or press the side button to clear the message.

Perform the following to enable Low heart rate alert:

1 Open the Huawei Health app, touch Devices then your device name, go to Health

monitoring > Continuous heart rate monitoring, and enable Continuous heart rate monitoring.

2 Touch Low heart rate alert, and set a limit.

HR Data Broadcasts

After HR Data Broadcasts is enabled, the device will continuously measure your heart rate. You can share your heart rate with other devices that support this feature or third-party apps.

1 Enter the app list and go to Settings > HR Data Broadcasts. 2 Touch √, your device will then broadcast your heart rate data, and third-party devices and

apps can search for and connect to the device to collect the data. You can also touch Go workout, select a workout type, and start the workout. The device will continue the

broadcasts.

3 To end the workout, press and hold the button when the screen is on. 4 On the HR Data Broadcasts screen, press the button and touch √ to exit HR Data

Broadcasts.

Breathing exercises

Enter the app list on your device and touch Breathing exercises, set the duration and rhythm, touch the breathing exercises icon on the screen, and follow the onscreen instructions to do the breathing exercises. After the exercise is nished, the screen will display data such as the heart rate before the exercise, exercise duration, and evaluation.

Stress test

Testing your stress levels

Wear the device correctly and keep your body still during the stress test.

• Single stress test:

Open the Huawei Health app, touch the Stress card, and touch Stress test to start a single stress test. Touch Calibrate stress level and follow the onscreen instructions to calibrate the stress level.

Page 25

Health Management

• Periodic stress test:

Open the Huawei Health app, touch Devices and then your device name, go to Health monitoring > Automatic stress test, turn on the switch for Automatic stress test, and

follow the onscreen instructions to calibrate the stress level. Periodic stress tests will then start automatically when you wear the watch correctly.

The accuracy of the stress test may be aected if the user has just taken substances with caeine, nicotine, or alcohol, or psychoactive drugs. It may also be aected when the user suers from heart disease or asthma, has been exercising, or is wearing the watch incorrectly.

Viewing stress data

• On the device:

Press the Up button to access the device's app list, and touch Stress to view your daily stress change, including the stress bar chart and level in a single day.

• In the Huawei Health app:

Open the Huawei Health app, then touch the Stress card to view your latest stress scores and level, daily, weekly, monthly, and yearly stress curves, and corresponding advice.

Activity reminder

When Activity reminder is enabled, the device will monitor your activity throughout the day in increments (one hour by default). It will vibrate and the screen will turn on to remind you to take a moment to get up and move around if you didn't move around during the set period.

Open the Huawei Health app, go to the device details screen, touch Health monitoring, and enable Activity reminder.

• The device will not vibrate to remind you to move around if you have enabled Do Not

Disturb on it.

• The device will not vibrate if it detects that you are asleep.

• The device will only send reminders between 8:00 and 12:00 and between 14:30 and

21:00.

Get up

After receiving an activity reminder, touch Get moving > Start, and then demos will be displayed on the watch to show you how to stretch your body.

Menstrual cycle predictions

The device can predict your future periods and fertile windows based on your previous menstrual periods and calendar info. Related data and reminders can be viewed on the device. You can use the following methods to enable this feature.

Page 26

Health Management

Open the Huawei Health app, touch the Cycle Calendar card, and grant the corresponding permissions. If you are unable to nd the Cycle Calendar card on the home screen, touch

EDIT on the home screen to add this card to the home screen.

Method 1: On the device's home screen, press the side button, select Cycle Calendar, and

touch

to set the start and end of your period. After being set, your device will

intelligently predict your next period based on the data you recorded.

Method 2:

1 Open the Huawei Health app, go to the Cycle Calendar screen, go to

> Cycle

Calendar settings in the upper right corner, select Period length or Cycle length, and

you can enable reminders for Start of period, End of period, Start of fertile window, and End of fertile window in Reminders. You can also enable All.

2 The device will send you reminders for the start and end of your period and fertile

window.

• Touch Records to view and modify the period data. The predicted period is marked

with a dotted line.

• The device will remind you about the start of your period at 8:00 AM on the day

before it's supposed to start. You will be reminded about all other reminders for the day of the event at 8:00 AM on that day.

Measuring blood oxygen levels (SpO2)

Single SpO2 measurement

Wear your device properly, press the side button to enter the app list, swipe down on the screen, and touch SpO2 to start measuring your SpO2. After the measurement is complete, Test again will be displayed at the bottom of the screen.

• For more accurate results, it is recommended that you wait three to ve minutes after

putting the device on before measuring your SpO2.

• Keep still and make sure the device ts relatively tightly during the measurement, but

• This measurement may also be aected by some external factors such as low ambient

temperatures, arm movements, or tattoos on your arm.

• The results are for reference only and are not intended for medical use.

• The measurement will be interrupted if you swipe right on the device screen, receive an

incoming call, or an alarm goes o.

Page 27

Health Management

Automatic SpO2 measurements

1 Open the Huawei Health app, touch Devices and then your device name, touch Health

monitoring, and enable Automatic SpO2 measurement. The device will then

automatically measure and record your SpO2 when it detects that you are still.

2 Touch Low SpO2 alert to set the lower limit of your SpO2 for you to receive an alert

when you are not asleep.

Sleep monitoring

Recording sleep data on your wearable device

Ensure that you are wearing your device correctly. The device will automatically record the duration of your sleep, and identify whether you are in a deep sleep, a light sleep, or awake.

• Open the Huawei Health app, touch Devices, then your device name, go to Health

monitoring > HUAWEI TruSleep™, and enable HUAWEI TruSleep™. When enabled, the

device can accurately recognize when you fall asleep, when you wake up, and whether you are in a deep sleep, a light sleep, or REM sleep. The app can then provide you with sleep quality analysis, to help you understand your sleep patterns, and suggestions to help you improve the quality of your sleep.

• If HUAWEI TruSleep™ has not been enabled, your device will track your sleep in the

regular way. When you wear your device while sleeping, it will identify your sleep stages, and record the time that you fall asleep, wake up, and enter or exit each sleep stage, and it will then sync the data to the Huawei Health app.

Recording sleep data on your phone

• In the Huawei Health app, touch Sleep monitoring on the Health screen to enter the sleep

monitoring screen. Alternatively, touch the Sleep card on the Health screen, and swipe to nd and touch Record your sleep.

• Touch the settings icon in the upper right corner to edit your schedule and enable or

disable general sleep settings, such as Sleep sounds.

• Touch Go to sleep and place your phone within 50 cm of your pillow. Your phone will then

monitor and record your sleep data. Press and hold Hold to end for 3 seconds to exit sleep recording.

• Touch the icons at the bottom of the screen to select, play, turn o, and set a time for sleep

music.

Productive nap

• Touch the Sleep card on the Health screen of the Huawei Health app, swipe to nd and

touch Productive nap. Touch the settings icon in the upper right corner to set an alarm or nap reminder.

Page 28

Health Management

• Swipe to select a break time and touch START to enable the alarm. Touch the icons at the

bottom of the screen to select, play, turn o, and set a time for sleep music.

Viewing your sleep data

Touch the Sleep card on the Health screen of the Huawei Health app to view your daily, weekly, monthly, and yearly sleep data.

Sleep apnea detection

This feature is not supported for iOS phones.

Joining in the Sleep Apnea Study

1 Open the Huawei Health app, touch Devices then your device name, go to Health

monitoring > Advanced to enable TruSleepTM and other related settings.

2 Open the Huawei Health app, go to the device details screen, and touch Heart Study to

open the Heart Study app.

If you have not downloaded and installed the Heart Study app on your phone, you will be directed to download and install the app. After downloading and installing it, follow the onscreen instructions to sign in to the app.

3 Select to join the Sleep Apnea Study. 4 Touch Devices, and the app will automatically search for and notify you of the devices

that can be connected to. You can also manually select the device to be connected from the list of supported devices, and follow the onscreen instructions to nish pairing.

5 After the pairing is successful, touch the paired device, select Sleep Apnea Study, and

enable Sleep Apnea. Your watch will automatically measure and evaluate your breathing during sleep when you are not moving. After the watch is connected to your phone, it will sync your breathing data during sleep to your phone.

Exiting the Sleep Apnea Study

Open the Heart Study app, enter the Sleep Apnea Study on the home screen, touch + in the upper right corner and select Leave study to exit the Sleep Apnea Study.

You can re-join in the Sleep Apnea Study if you want to.

Heart Study

This feature is not supported for iOS phones.

Starting the Heart Study

1 Open the Heart Study app.

• Open the Huawei Health app, go to the device details screen, and touch Heart Study

to open the Heart Study app.

• Open the Huawei Health app, touch the Heart card on the home screen, and touch

Heart Study to open the Heart Study app.

Page 29

Health Management

If you have not downloaded and installed the Heart Study app on your phones, you will be directed to download and install the app. After downloading and installing it, follow the onscreen instructions to sign in to the app.

2 Join in the Heart Study. 3 Touch Devices, and the app will automatically search for and notify you of the devices

that can be connected to. You can also manually select the device to be connected from the list of supported devices, and follow the onscreen instructions to nish pairing.

4 After pairing is successful, touch the paired device. Select Heart Study and ensure that

Smart real-time measurement has been enabled. Once enabled, your device will

automatically and intelligently evaluate your heart health when you are still, and sync your heart health information to your phone after it is connected to your phone.

Arrhythmia detection

Connect your device to the Heart Study app. Open the Heart Study app, go to Heart health information > Arrhythmia detection, and touch Start.

• It is recommended that you detect arrhythmia twice a day for two weeks or once every

two days for three months, to enhance the detection accuracy.

• You can follow your friends and family members to stay in the loop with their heart

health.

Atrial brillation risk detection

Open the Heart Study app, touch Heart health information, and touch + in the upper right corner. Select AF risk prediction, or go to Predict > Join in.

You can view the prediction result and risk trend to predict risks and take countermeasures.

• This feature is useful for people who have tested positive for arrhythmia. If you are

feeling uncomfortable, it is important to consult a doctor as soon as possible.

• We recommend you to detect the risk of atrial brillation at least three times a day

and enable automatic measurements to ensure enough data for analysis and better predictions.

Quitting the Heart Study

Open the Heart Study app, select the heart research project, touch + in the upper right corner, and touch Leave study.

You can re-join the research project at any time if you want to.

Healthy Living

The Huawei Health app oers Healthy Living to help you develop healthy lifestyle habits and enjoy a healthy new life.

Page 30

Health Management

• Due to the dierent physical conditions of each individual, the health suggestions

provided in Healthy Living, especially those related to physical activity, may not be applicable to all users, and may not be able to achieve the desired eect. If you feel uncomfortable during activities or workouts, please stop and take a rest or consult a doctor in a timely manner.

• The health suggestions provided in Healthy Living are for reference only. You shall bear

all risks, damages, and liabilities arising from participating in any activities or workouts.

Enabling Healthy Living

1 Open the Huawei Health app, go to Health > EDIT, and add the Healthy Living card. 2 Touch the Healthy Living card, and follow the onscreen instructions to agree to the User

Notice.

Selecting check-in tasks and setting goals

Check-in tasks are classied into basic check-in tasks and optional check-in tasks. You can add optional check-in tasks based on your needs.

On the Healthy Living screen, touch

in the upper right corner, select Health plan, select a

check-in task, and touch Goal settings on the task card to set your daily goal.

Viewing the task completion status

• Enter the app list, and select Healthy Living to view the completion status of a specic

task.

• Open the Huawei Health app and touch the Healthy Living card on the Health screen to

view the task completion status.

Reminders

1 On the Healthy Living screen, touch

in the upper right corner, and select Health plan.

2 On the health plan screen, you can set general reminders or reminders for check-in tasks.

That is, you can turn on the Weekly report reminders on watch switch or the Reminders switch for a specic task, for example, enabling Reminders for Breath.

Weekly report and sharing

Viewing a weekly report: On the Healthy Living screen, touch

in the upper right corner,

and select Weekly report to view the report details.

Sharing: On the Healthy Living screen, touch the share icon in the upper right corner to share it to your WeChat friends, WeChat Moments, or Weibo, or save it to your device.

Disabling Healthy Living

On the Healthy Living screen, touch

in the upper right corner, and go to About >

Disable. Once Healthy Living is disabled, all data of goals will be cleared.

Page 31

Assistant

Apps

This feature is not supported for iOS phones.

Installing apps

1 Open the Huawei Health app, touch Devices and your device name, then touch

AppGallery.

2 Select the app you want to use from the Apps list and touch Install. After the app is

installed, it will be displayed in the app list on your device.

Using apps

Swipe up or down on the app list of your device, select an app, and follow the onscreen instructions to use it.

• Some apps can only be used when the device is connected to your phone. If the device

displays a message asking you to install the app on your phone, it indicates that the app can only be used with your phone.

• When you install and use an app on your phone for the rst time, agree to the

agreements or terms displayed on the app screen, and follow the onscreen instructions to complete giving authorization and logging in. Otherwise, you will not be able to use the app. If there is an issue when granting authorization, open the Huawei Health app, go to Me > Settings > Device capabilities, and select the app that you want to grant authorization to again.

Updating apps

1 Open the Huawei Health app, touch Devices and your device name, then touch

AppGallery.

2 Touch Manager to view the apps to be updated and the list of installed apps. 3 Go to Updates > Update to update apps to the latest version for a better experience.

Uninstalling apps

1 Open the Huawei Health app, touch Devices and your device name, then touch

AppGallery.

2 Touch Manager to view the apps to be updated and the list of installed apps. 3 Go to Installation manager > Uninstall to uninstall apps. After the app is uninstalled, it

will also be deleted from your device.

If you touch Disable AppGallery service and DISABLE in the Huawei Health app, AppGallery will be disabled. If you want to use this feature again, touch AppGallery and follow the onscreen instructions to complete authorization, and enable AppGallery.

Page 32

Assistant

HUAWEI Assistant∙TODAY

HUAWEI Assistant·TODAY makes it easy to view weather forecast, wake up the voice assistant, and control music playback.

Entering/Exiting HUAWEI Assistant·TODAY

Swipe right on the device's home screen to enter HUAWEI Assistant·TODAY. Swipe left on the screen to exit HUAWEI Assistant·TODAY.

Controlling music playback

This feature is not supported when the device is paired with an iPhone.

• Controlling music playback on the watch:

Swipe right on the home screen of your watch to enter HUAWEI Assistant·TODAY, and touch the music card with the watch icon. You can pause music, switch between songs, and adjust the music volume for your watch.

• Controlling music playback on the phone:

1 Open the Huawei Health app, go to the device details screen, touch Music, and turn on

Control phone music.

2 Open the music app on your phone and play music. 3 Swipe right on the home screen of your watch to enter HUAWEI Assistant·TODAY, and

touch the music card with the phone icon. You can pause music, switch between songs, and adjust the music volume for your phone.

Setting the vibration strength

On the device, go to Settings > Vibration or Settings > Sounds & vibration > Vibration, select your preferred vibration strength (strong, soft, or none), and touch OK.

Conguring Gallery watch faces

Before using this feature, update the Huawei Health app and your device to their latest versions.

Selecting Gallery watch faces

1. Open the Huawei Health app, touch Devices and then your device name, and go to Watch faces > More > Mine > On watch > Gallery to access the Gallery settings screen.

2. Touch + and select either Camera or Gallery as the method for uploading an image.

3. Touch √ in the upper right corner, and then touch Save. Your watch will then display the selected image as the watch face.

Page 33

Assistant

Other settings

On the Gallery settings screen:

• Touch Style, Position, and Function to set the style, location of the date and time and

functions on the Gallery watch faces.

• Touch the Cross icon in the upper right corner of a selected photo to delete it.

Setting the AOD watch face

After the Always on display (AOD) feature is enabled, the current watch face will be displayed when you raise your wrist if the main watch face doesn't come with a built-in AOD watch face.

Setting AOD

1 In the app list, go to Settings > Watch face or Settings > Watch face & home, and

enable AOD.

2 Go to AOD style > Default style and select your preferred style. The style will then be

displayed when the main watch face doesn't come with a built-in AOD watch face and you raise your wrist.

HUAWEI WATCH FIT 2 Series uses a default watch face style, which doesn't need to be manually set, after AOD is enabled.

OneHop Watch Faces

You can use OneHop to upload images as Gallery watch faces on your device. Images saved on the cloud will need to be downloaded before being transferred. When you upload more than one image, you can tap on the watch face to switch between them.

• Before using this feature, update the Huawei Health app to its latest version, and make

sure that the wearable device is connected to your phones.

• This feature is only available when your device is paired with some HUAWEI phones

that support NFC. Your wearable device must support NFC.

Enabling OneHop

If the feature is not displayed on your device, you do not need to activate it manually. Once OneHop is enabled on your device, you won't be able to disable it. Even if the device has been restored to its factory settings, the feature will still be enabled.

1 In the device app list, go to Settings > OneHop to access the OneHop screen. 2 Touch Enable. Once you've enabled the feature, Enabled will display onscreen.

Using OneHop

1 Enable NFC on your phone.

Page 34

Assistant

2 Go to Gallery on your phone, select the images you wish to transfer, and tap the NFC area

on the back of your phone against the watch face. Once the transfer is successful, the images will display on the watch face in sequence.

3 Open the Huawei Health app, go to the device details screen, and touch Watch faces >

More > Mine > Gallery. You will see the transferred images in Gallery. Feel free to

customize the style and layout of the Gallery watch faces to suit your preferences.

Alipay

Once you have linked your device to your Alipay account, you can use the QR code or bar code on your device to make payments.

Linking Alipay

1 Select Alipay from the app list on your device and follow the onscreen instructions until

you see the Scan to link QR code displayed.

2 Open the Alipay app, scan the QR code displayed on your device, and then follow the

onscreen instructions to complete linking.

3 Follow the onscreen instructions to set the device name in the Alipay app. 4 Touch the Balance icon in the upper right corner of the Alipay app, and enter an amount.

Your watch and Alipay account will be linked once you complete a payment.

5 After your watch and Alipay account are successfully linked, you'll be able to manage your

balance by following the onscreen instructions.

• Your device can continue to make payments even when it has been disconnected from

the phone, has no Internet connection, or is oine.

• If you have not topped up your Alipay balance on your device, the payment sequence is

the same as that set on Alipay.

Scanning to make payments

After you have linked your device with your Alipay account, swipe right on the device screen to nd Alipay or press the Up button to access the app list then touch Alipay. Open Alipay, and show the payment code (a QR code or a bar code, which you can switch between by touching the device screen) displayed on your device to the vendor to make a payment.

Unlinking Alipay

You can use either of the following methods to unlink your device.

Method 1: Press the Up button on the watch and go to Alipay > Unlink. If you have topped up your Alipay balance on your watch, the balance will not automatically be refunded. Follow the onscreen instructions to unlink your Alipay account from your watch in Alipay. Only then will your balance be refunded.

Method 2: In the search box of the Alipay app on your phone, search for smart device and touch it, then select the target device and follow the onscreen instructions to unlink your

Page 35

device from the Alipay account. After they have been unlinked, swipe up on the Alipay screen on your device and select Unlink.

• If the Alipay balance on your device has already been topped up, the balance will

automatically be refunded to the remaining balance once your device is unlinked from Alipay.

• If you enable this feature, please take extra care when using your device. If your device

is lost, remember to promptly unlink your Alipay account.

• After the Alipay account is unlinked, the payment feature will still display, but can no

longer be used. Before using Alipay again, make sure that the Alipay account has been unlinked on both devices, and then link it once again.

• If you restore your device to its factory settings, the Alipay account will automatically

be unlinked from the watch.

Assistant

Bank card payment

After you link a bank card to the device using the Huawei Health app, you will be able to make payments using the device, even if the device is not connected to your phone or the Internet. This makes purchasing easy and convenient.

• To use this feature, update the Huawei Health app to the latest version. This feature is

not supported when the device is paired with an iPhone.

Linking a bank card

1 Open the Huawei Health app, touch Devices and the connected device's name, and then

touch Wallet.

2 Touch + in the upper right corner, and select Bank cards.

• If you are linking bank cards for the rst time, you will need to set a PIN on the

device screen, and then touch Next to add a bank card.

• If you have set a PIN, unlock the device screen, and touch Next to add a bank card.

3 Follow the onscreen instructions to scan the front of your bank card or manually enter

your bank card number, and then touch Next.

4 On the card issuing notice screen, swipe up, enter the required information, and touch

Next.

5 After you enter the SMS verication code, a message will be displayed indicating that the

card has been activated. Then touch OK.

Quick payments

Open the app list on the device, touch Wallet to enter the card list, touch Pay to activate a card, and place the watch face close to a card reader. When the device displays a message indicating that the device is close to the card reader, use the device to make a payment.

Page 36

Assistant

• If the device screen is locked, unlock the screen and then place the watch face close to

the card reader to make a payment.

• Currently, only UnionPay is supported and international credit cards are not supported.

See the Add bank card screen to nd out which banks are supported.

• Wallet of the device can be used to make payments for all the merchants that support

UnionPay QuickPass or Cloud QuickPass in the Chinese mainland.

• You will not need to enter the bank card password when making a payment if the

password-free micropayment feature is enabled for your bank card and the card reader also supports this feature. Otherwise, you will need to enter the payment password on the card reader.

Removing a bank card

1 Open the Huawei Health app, touch Devices and then the connected device's name, touch

Wallet, and select the bank card you want to remove.

2 Go to Details > Delete card. Follow the onscreen instructions and touch OK.

Disabling the screen PIN will cause the bank card to be removed.

Transportation cards

Activate transportation cards in the Huawei Health app, and then you'll be able to make payments simply by tapping your watch against the payment terminal.

• To use this feature, update the Huawei Health app to the latest version. This feature is

not supported when your device is paired with an iPhone. Your wearable device must support NFC.

• The activated virtual transportation cards enjoy the same benets as their physical

forms.

• Transportation cards are only supported in some cities. Please refer to ocial Huawei

notices and the wearable health section of Huawei Club for the latest information on which cities transportation cards are supported in.

• Dedicated transportation cards, such as those for students, elderly people, and soldiers,

can't be added.

Activation

1 Open the Huawei Health app, touch Wallet on the device details screen, and then touch +

> Transportation cards or the transportation card icon.

2 Follow the onscreen instructions to select your desired transportation card, such as

Chang'An Card.

3 Select your preferred top-up amount, and touch Activate. 4 After you have paid for the card to be activated, a message will display onscreen

indicating that the card is being activated. Once activation is complete, touch Done.

Page 37

Assistant

• Supported regions are subject to regional transportation cards displayed in the Huawei

Health app. The card issuer will determine whether the virtual transportation card requires a service fee to be activated, and if so how the fee is charged. The card activation service fee and method are subject to the information on the card activation screen. You can choose whether or not you would like to activate the card.

• The card activation service fee is charged by the card issuing company or partner. You

can view the merchant information when submitting an order, or on the payment screen. After a transportation card is successfully activated, the refundability of the service fee is dependent on the card issuer's own policies.

Top-up

1 Open the Huawei Health app, touch Wallet on the device details screen, and select the

transportation card you want to top up.

2 Touch Top up, select an amount, and touch Conrm. 3 Your transportation card will be topped up once you have completed the payment.

You can touch the transportation card you have topped up in Cards to view its balance.

Payment

If you have linked multiple transportation cards, you can set your most frequently used card as the default card on the device details screen in the Huawei Health app.

Once the transportation card is activated and set as the default card, you'll be able to make payments with your watch, even when the watch screen is o, Bluetooth is disconnected, or the watch is powered o. Hold the watch screen close to the payment terminal to make the payment.

Transportation cards are activated in the wearable's NFC chip. Therefore, card payments will not be aected if you do not connect the watch to your phone, forget to bring your phone, or pair the watch with another phone.

Simulating physical access cards

The device can simulate most unencrypted 13.56 MHz access cards that are currently on the market. This feature does not yet apply to bank cards with access functions, or access cards with banking or transportation functions. By importing the physical access card information to the chip on the device, you'll be able to use the device as an access card.

• To use this feature, update the Huawei Health app to the latest version. This feature is

not supported when your watch is paired with an iPhone.

• Each access card can be simulated on several dierent devices. A maximum of ve

access cards can be added to each device.

• Some encrypted cards can be added to the watch, but the watch may be unable to

function as an access card.

Page 38

Assistant

Simulating physical access cards

1 Update your wearable device and the Huawei Health app to their latest versions. 2 Open the Huawei Health app, touch Devices and then the connected device's name, and

touch Wallet.

3 Touch + > Keys > Access cards, and attach the device to the center of the card. After the

card has been read successfully, the physical card will be automatically simulated on the device. Enter a name for the access card in the Huawei Health app and touch Done.

Using access cards

1 Move your device close to the card sensor to enable the access card feature. 2 Swipe up or down on your watch screen to switch to the access card you want to use, and

bring your device close to the card sensor again.

• Access cards will be deleted when the watch is restored to its factory settings.

• The use of the access card feature does not require connection to a mobile phone.

Viewing and removing access cards

1 Open the Huawei Health app, touch Devices and then the connected device's name, and

touch Wallet.

2 Touch X cards on the right side of Key to view all of the added access cards. 3 Select an access card to view its details.

4 Touch

instructions to remove the access card.

Setting the default card

in the upper right corner of the screen and select Remove. Follow the onscreen

1 Open the Huawei Health app, touch Devices and then the connected device's name, and

touch Wallet.

2 Touch X cards on the right side of Key to view all of the added access cards. 3 Touch the access card you want to use as the default card and then touch Set as default.

• Only one access or transportation card can be set as the default card.

• Open Wallet on your device and swipe to a non-default card for a while. Your device

will vibrate to notify you to swipe your card against the sensing area. Then this card will be automatically set as the default card.

• Once you have set a default card, you will still be able to swipe that card even when

the screen is o or the device is powered o. When the device powers o due to low battery, you can swipe the default access card up to 10 times in one day.

Page 39

Assistant

Smart Swipe

Smart Swipe allows your device to automatically switch between cards to adapt to dierent card readers.

• To use this feature, update the Huawei Health app to the latest version. This feature is

not supported when your device is paired with an iPhone.

• Currently, this feature only supports access cards that do not require identity

authentication.

• Currently, Smart Swipe supports adding only one transportation card and one access

card. When the two cards are added at the same time, the access card needs to be identied twice when being used.

1 Open the Huawei Health app, touch Devices and your device name, and then go to

Wallet >

2 Touch the default card and select Smart Swipe from the default card settings screen. 3 After the screen displays a message indicating that the settings are complete, add your

frequently used cards.

Setting the time and language

After you have synced data between your device and phone, the system language will be synced to your device as well.

If you change the language, region, or time on your phone, the changes will automatically sync to the device as long as it is connected to your phone via Bluetooth.

Stopwatch

Select Stopwatch from the device's app list, touch to start a stopwatch, to count

times,

to pause the stopwatch, and to reset the stopwatch.

Timer

On your device, enter the app list, touch Timer, and select or set how long you want to time

for. Touch to exit the timer.

• The device will vibrate to inform you when the time is up.

• Swipe right on the screen or press the side button to start timing in the background.

to start a timer, to pause the timer, to clear the timer, and

Page 40

Assistant

Flashlight

On the device, enter the app list and touch Flashlight. The screen will light up. Touch the screen to turn o the ashlight, then touch the screen again to turn it back on. Swipe right on the screen or press the side button to close the Flashlight app.

The ashlight turns on for 5 minutes by default.

Compass

The compass displays the direction, longitude, and latitude of the device, helping you get your bearings in unfamiliar environments such as when you are outdoors or traveling.

Open the app list on the device, touch Compass, and follow the onscreen instructions to slowly rotate the device and nish calibrating. After the calibration is complete, you will then be able to use the compass.

During the calibration, avoid sources of magnetic eld interference, such as phones, tablets, and computers. Otherwise, the calibration accuracy may be aected.

Finding your phone using your watch

Swipe down on the watch face screen to enter the shortcut menu and touch . The Find phone animation will then be played on the screen.

If your device and phone are within the Bluetooth connection range, the phone will play a ringtone (even in Vibrate or Silent mode) to notify you of its whereabouts.

Touch the watch screen to stop searching for your phone.

This feature will only work when your phone and device are connected via Bluetooth.

Finding your watch using your phone

You can use your HUAWEI phone to nd your watch once your watch is connected to the Huawei Health app.

Getting started

1 Download and install the latest versions of the HUAWEI Mobile Cloud, Find Device, and

Huawei Health apps from AppGallery. If the apps have already been installed, update them to their latest versions.

2 Use the same HUAWEI ID to log in to the three apps and ensure that your wearable

device is connected to the Huawei Health app.

Finding your watch using your phone

1 Select the target device in the Find Device app's device list.

Page 41

Assistant

2 On the device details screen, locate the device and touch Listen for the ringtone to nd

the device.

Remote shutter

This feature is only supported for HUAWEI phones.

1 Make sure that your device is connected to the phone via Bluetooth and the Huawei

Health app is running properly.

2 On the device, enter the app list and select Remote shutter. This will open the Camera

app on your phone at the same time.

3 Touch the camera icon on the screen to take a photo using your phone. Swipe right on the

screen or press the side button to close Remote shutter.

Music

Adding music to the device

This feature is not supported when the device is paired with an iPhone.

1 Open the Huawei Health app and go to the device details screen. 2 Go to Music > Manage music > Add songs and select the music to be added. 3 Touch √ in the upper right corner of the screen.

When adding music, you can also create a playlist by touching New playlist. After you have created a playlist, you can add your preferred music that has been uploaded to your watch to the playlist for easy management.

Controlling music playback

1 Go to the app list of your device, select Music, or go to Music > Playing music. 2 Touch the play button to play the song. 3 On the music playback screen, you can swipe up on the screen to view the playlist, switch

between songs, adjust the volume, and set the playback mode (for example, play songs in order or randomly).

Page 42

Do Not Disturb

Swipe down on the device's home screen and touch to enable Do Not Disturb. Alternatively, enter the app list, go to Settings > Do Not Disturb, and schedule a period for this mode.

After Do Not Disturb is enabled:

• The device will not ring or vibrate to notify you of incoming calls or notications, and

the Raise to wake feature will be disabled.

• The alarm will vibrate and ring as normal.

Adding custom cards

1 Go to Settings > Custom cards or Settings > Display > Favorites.

2 Touch

cards. The actual display prevails.

3 Touch

another position (supported on some device models). Touch

, and select the cards to be displayed, such as the Sleep, Stress, and Heart rate

next to a card that you have added, or touch and hold the card to move it to

to delete the card.

4 After the settings are complete, swipe left or right on the home screen to view the added

cards.

Adjusting and replacing the strap

Adjusting the strap length

The silicone strap and leather strap are designed with horseshoe buckles, and the metal strap is designed with a dual magnetic clasp. You can adjust the strap based on your wrist circumference, so that it ts comfortably.

Removing and installing the strap

• Strap 1: Active Edition

Page 43

1: Supert button

Remove the strap: Press the supert button on each end of the watch body to separate the strap from the watch body.

Install the strap: Align the strap with the watch body and fasten it.

Separately purchased links are required for replacing the silicone strap of the Active Edition with a leather or metal strap.

• Strap 2: Classic Edition

1: Link 2: Supert button 3: Springbar lever

Page 44

Remove the links: Press the supert button on each end of the watch body to separate the links from the watch body.

Install the links: Align the links with the watch body and fasten them.

Remove the strap: Push the springbar lever on the strap, tilt the strap outwards and remove it from the link xing slot.

Install the strap: Push the springbar lever on the strap, align the springbar pin with the link xing slot, and install the strap.

• Strap 3: Elegant Edition

Page 45

1: Link 2: Supert button 3: Springbar lever

Remove the links: Press the supert button on each end of the watch body to separate the links from the watch body.

Install the links: Align the links with the watch body and fasten them.

Remove the strap: Push the springbar levers on the strap, tilt the strap outwards and remove it from the link xing slot.

Install the strap: Push the springbar levers on the strap, align the springbar pin with the link xing slot, and install the strap.

Updating the watch

Open the Huawei Health app, touch Devices and your device name, then touch Firmware update. Your phone will then check for the available updates. Follow the onscreen

instructions to complete the update.

Page 46

Viewing the Bluetooth name, MAC address, SN, model, and version number

• Method 1: On your device, go to Settings > About, swipe up and down to view the device

name (the device Bluetooth name), MAC address, model, version number, and SN (serial number).

• Method 2: Open the Huawei Health app, then touch Devices and the device name. The

name of the connected device is the Bluetooth name. Open the Huawei Health app, go to the device details screen, touch Firmware update, the

Current version is the current version number of your device.

Restoring your device to its factory settings

Method 1: Go to Settings > System > Reset or Settings > System & updates > Reset on

your device.

Method 2: Open the Huawei Health app, touch Devices then your device name, and touch Restore factory settings.

Personal data will be cleared from your device after you restore the device to its factory settings. Exercise caution when performing this operation.

Water and dust resistance

The device features 5 ATM water resistance, but this protection is not permanent and may reduce over time.

You can wear the device when you are washing your hands, outside in the rain, or swimming in shallow water. Do not wear it when you are showering, scuba diving, or diving.

The following may aect the water resistance of the device:

• It is dropped, bumped, or encounters other impacts.

• It comes into contact with liquids including soap, shower gel, detergent, perfume, lotion,

and oil.

• It is used in high-temperature and high-humidity environments including hot baths and

saunas.

One-touch drainage

Swipe down from the home screen, touch , and the screen will display that it's draining water. During drainage, the device will vibrate and make a drip sound. When the drainage is about to nish, you can shake the device to speed up the drainage of water droplets from the bell mouth.

Page 47

After you swim with the device, it will automatically vibrate and drain water.

Statement for devices supporting micropower frequency bands

This product supports micropower short-range radio (also referred to as NFC) specied in the "Radio Regulations of the People's Republic of China". According to Notice No. 52, 2019 issued by the Chinese Ministry of Industry and Information Technology (MIIT) on requirements for NFC:

1. The product complies with the specic clauses and application scenarios specied in the Technical Requirements for Micropower (Short Distance) Radio Equipment, including the antenna types and performance, and usage of control, adjustment, and switches.

2. It is forbidden to change the application scenarios or conditions, expand the transmit frequency range, increase the transmit power (including installing additional RF power ampliers), or change the transmit antenna without permission.

3. The product shall not cause harmful interference to other legal radio stations, and requests for protection against harmful interference shall not be proposed.

4. The product shall withstand interference from industrial, scientic, and medical (ISM) devices that radiate radio frequency energy or other legal radio stations.

5. If the product causes harmful interference to other legal radio stations, stop using it immediately and take measures to eliminate the interference before continuing to use it.

6. The use of civil and military radio stations such as radio astronomy stations, meteorological radar stations, and satellite earth stations (including measurement and control stations, ranging stations, reception stations, and navigation stations) inside aircraft and in accordance with laws and regulations, relevant national regulations, and standards, as well as the use of micropower equipment in the electromagnetic environment protection areas such as airports, shall comply with the regulations of the electromagnetic environment protection and relevant industry administrative departments.

7. It is forbidden to use model remote controls in an area with a radius of 5,000 meters centered on the center of the airport runway.

8. Environmental conditions for the temperature and voltage of the micro-power device being used have been specied.

Huawei Watch Fit 2 User guide

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

Getting Started

Powering on

Restarting

Buttons and screen control

Icons

Pairing and connecting to wearable devices

Installing the Huawei Health app

Pairing and connecting to wearable devices

Pairing and connecting in other scenarios

Charging

Charging

Viewing the battery level

Locking or unlocking

Setting a PIN

Changing the PIN

Disabling the PIN

Forgot the PIN

Setting grid layout on the home screen

Adjusting the screen brightness

Changing watch faces

Receiving weather reports

Enabling Weather reports

Viewing weather information

Setting an alarm

Message management

Viewing unread messages

Replying to messages

Customizing quick replies

Deleting unread messages

Setting favorite contacts

Unknown caller display

Bluetooth voice calling

Viewing call logs

Viewing your call logs

Calling back

Deleting call logs

Voice assistant

Exercise

Starting an individual workout

Starting a workout using the device

Starting a workout using the Huawei Health app

Linking for a single workout

Automatic workout detection

Viewing workout records

Viewing workout records on the device

Viewing workout records in the Huawei Health app

Deleting a workout record

Viewing daily activity data

Running courses

Custom running courses

Creating a training plan

Enabling Smart Trainer or Smart companion

Enabling Smart Trainer

Enabling Smart companion

Viewing the RAI

Before you start

Viewing the RAI

Workout status

Route back

Routes

Exporting workout routes

Importing workout routes

Syncing routes to the wearable device

Deleting routes

Health Management

Measuring your heart rate

Individual heart rate measurement

Continuous heart rate measurement

Resting heart rate measurement

Heart rate measurement for a workout

Heart rate limit warning

High heart rate alert

Low heart rate alert

HR Data Broadcasts

Breathing exercises