Huawei WAS-LX2, WAS-LX3, WAS-LX1A, WAS-LX1, WAS-L03T User Manual
...
Quick Start Guide
For more information
Go to http://consumer.huawei.com/en/ to download the
user guide for your device and read the FAQ, privacy
policy, and other information.
Settings
>
Go to
read the legal information.
Please visit
http://consumer.huawei.com/en/support/hotline/ for the
most up-to-date contact information for your country or
region.
About phone
>
Legal information
to
1
Your phone at a glance
Front camera
Light sensor
Microphone
Micro USB port
Speaker
Power button
Volume button
Earpiece
Status indicator
Fingerprint
scanner
Headset jack
Flash
Camera
Before you start, let's take a look at your new phone.
•
To turn on your phone, press and hold the power
button until your phone vibrates and the screen turns
on.
•
To turn off your phone, press and hold the power
button, and then touch .
To forcibly restart your phone, press and hold the
power button until your phone vibrates.
2
Getting started
NJDSP4%
Or
Follow the instructions in the following figures to set up
your phone.
• Do no t ins ert o r rem ove a SIM card while your
phone is on.
• Ensure that the SIM card is in the correct position
and keep the card tray level when inserting it into
your phone.
Please exercise caution when using the SIM ejector
pin to avoid hurting your fingers or damaging your
phone. Store your pin in a safe place out of the reach
of children to prevent them from swallowing it or
injuring themselves by accident.
Insert the SIM card into the correct card slot to
ensure that it can be recognized by the phone.
The upper card slot may not support nano-SIM cards.
You can insert only a microSD card into it.
3
Safety Information
Please read all of the safety information carefully before
using your device to ensure its safe and proper operation
and to learn how to dispose of your device properly.
Viewing the safety and regulatory
information
For more information on safety, touch
>
Legal information
phone
For more information on regulation, touch
About phone
For more information on certification logos, touch
Settings > About phone > Certification logos.
Operation and safety
•
•
•
•
>
Authentication info
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
Using an unapproved or incompatible power
adapter, charger, or battery may damage your
device, shorten its lifespan, or cause a fire, explosion,
or other hazards.
Ideal operating temperatures are 0 °C to 35 °C. Ideal
storage temperatures are -20 °C to +45 °C.
Pacemaker manufacturers recommend that a
minimum distance of 15 cm be maintained between
a device and a pacemaker to prevent potential
Settings
>
Safety information
Settings
.
>
About
.
>
4
Loading...