Huawei VKY-L29, VKY-L09 User Manual

Quick Start Guide
Your device at a glance
Dual-lens camera
Secondary microphone
Dual-tone flash Laser sensor
Headset jack
Infrared sensor
Earpiece
Optical proximity
sensor
Ambient light sensor
Front camera
Status indicator
Card slot
fingerprint
scanner
USB-C port
Volume button
Power button
Speaker
Primary microphone
Thank you for choosing a Before you start, let's take a look at your new device.
To power on your device, press and hold the power button until your device vibrates and the screen turns on.
To power off your device, press and hold the power button, and then touch .
HUAWEI P10 Plus
smartphone.
• To force your device to restart, press and hold the power button until your device vibrates.
• Do not remove your device's pre-fitted screen protector, which guards against scratches and abrasion.
1
Inserting and removing cards
NJDSP4%
VKY-L09
NJDSP4%
0S
VKY-L29
Follow the instructions in the following figures to set up your device.
• Do not insert or remove the card tray when your device is powered on.
• Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device.
Be careful not to scratch your device or hurt yourself when using the SIM eject pin. Store the SIM eject pin out of the reach of children to prevent accidental swallowing or injury.
Do not use cut or modified SIM or microSD cards with your device as these may not be recognized and could damage the card tray.
2
Dual card dual standby single pass
This description should only be used in conjunction with the VKY-L29.
Your phone supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously.
When you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer call s. If someone calls SIM card 2, the caller will hear a voice message similar to "The subscriber you dialed is out of the service area" or "The subscriber you dialed cannot be connected for the moment, please try again later." The actual message will vary by service provider.
When you are using SIM card 1's data se rvice, SIM card 2's
data service will be disabled.
Your phone's single pass feature helps reduce power consumption and increase your phone's standby time. It is not related to your service provider's network conditions. It may be a good idea to contact your service provider and subscribe to missed call reminder and related assistance services to avoid the conflicts mentioned above.
3
For more information
If you encounter any problems while using your phone, you can obtain help from the following resources: Log on to the official Huawei website. You can:
Visit http://consumer.huawei.com/en/ to download user
guides, view frequently aske d questions, and use emulators
to test out Huawei products.
Visit http://consumer.huawei.com/en/support/hotline for
the most up-to-date contact information for your country
or region.
Go to
Settings
and touch
information
Go to
information
for your product. Go to
Authentication info
product. Go to
logos
product.
to view legal information for your product.
Settings
>
Safety information
Settings
Settings
to view more information on certification logos for your
All pictures and illustrations in this guide, including but not
limited to the phone color, size, and disp lay content, are for
your reference only. The actual product may vary. Nothing
in this guide constitutes a warranty of any kind, express or
implied.
About phone
and touch
About phone
and touch
About phone
to view regulatory information for your
and touch
About phone
>
Legal
>
Legal
to view safety information
>
>
Certification
4
Loading...
+ 9 hidden pages