Huawei T202 User Manual
T202
GSM Dual Band Mobile Phone
Copyright © 2008 Huawei Technologies Co., Ltd.
and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd.
in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the
property of their respective holders. The information in this manual is subject to change without notice. Every effort
has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information,
and recommendations in this manual do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China
Tel: +86-755-28780808 Global Hotline: +86-755-28560808
E-mail: mobile@huawei.com Website: www.huawei.com
Your Phone
y
Screen
Earpiece
Navigation Keys
Left Soft Key
Dial/Send Key
Number Keys
Key
Microphone
Headset Jack
Right Soft Key
End/Power Ke
Key
Charger Int er f ac e
1
Keys and Functions
Press… To…
z
Make or answer a call.
z
View all call records in the standby mode.
z
Power on or off the phone (by pressing
and holding this key).
z
End a call or reject an incoming call.
z
Return to the standby mode.
Select the option displayed on the lower left
corner of the screen.
Select the option displayed on the lower
right corner of the screen.
z
Access the New screen for writing a new
message (
Call History screen for writing a new
message (
z
Increase the volume ( or ) and
decrease the volume ( or ) during a
call.
), Messages ( ), the
), and Alarm ( ).
2
Press… To…
z
Enter numbers and characters.
z
Speed dial phone numbers in the standby
mode (by pressing and holding the 1-9
–
keys).
z
Select a submenu item labeled with the
corresponding number.
z
Enter the * symbol.
z
Activate or deactivate the Meeting profile
(by pressing and holding it) in the standby
mode.
z
Provide different functions according to
the phone features being used.
z
Enter the # symbol.
z
Lock the keypad in the standby mode (by
pressing and holding it).
z
Provide different functions according to
the phone features being used.
3
Screen Icons
Icon Description Icon Description
Indicates the
signal strength.
The headset is
connected.
The Silent profile
is activated.
The keypad is
locked.
The Custom
profile is
activated.
The Outdoor
profile is
activated.
The Meeting
profile is
activated.
Indicates the battery
level.
The call is
transferred.
An alarm clock is set.
Memory for saving
messages on the
phone is full.
The battery power
level is extremely
low.
Unread SMS
Unread voice mail
4
Menu Tree
Call History
1 Missed Calls
2 Answered Calls
3 Dialed Calls
Alarm
1 Alarm1
2 Alarm2
3 Alarm3
Phone Book
1 Contacts
2 Add New
3 Speed Dials
4 Memory Stat us
Messages
1 Write
2 Inbox
3 Outbox
4 Drafts
5 Voicemail
6 Settings
7 Memory St atus
Profiles
1 General
2 Meeting
3 Outdoor
4 Silent
Display
1 Backlight
2 Contrast
Network Service
1 Call Wa iting
2 Call Forwarding
3 Call Bar ring
4 Networ k Select
STK
You can consult
your service
provider for more
information about
this function.
5
Settings
1 Time&Date
2 Auto Keypad
Lock
3 Language
4 Security
5 Factory Reset
6 Version
Installing the SIM Card and Battery
Make sure that the golden area on the SIM card is facing
downwards and the cut-off edge is correctly aligned with
the card holder.
Removing the Battery and SIM Card
Make sure that your phone is powered off.
Charging the Battery
1. Connect the charger to the charger interface at the
bottom of your phone.
2. Connect the charger to an AC power socket.
3. During the charging process, the charging icon is in
animated status.
6
When the charging icon becomes static, the battery is
4.
completely charged. Then you can disconnect the
charger from the AC power socket.
5. Disconnect the charger from the phone.
Note When you start to charge a completely
discharged battery, the charging indicator may
appear on the screen several minutes later. You
can make and receive calls untill the indicator
appears.
Using the Function Menu
1. In the standby mode, press (Menu) or to
display the main menu.
2. Press , , or to select a menu item.
3. Press (Select) or to display the selected
menu.
4. Display the submenu in either of the ways:
z
Press , , or to scroll to a submenu
and press
selected submenu.
z
Press the number key corresponding to the serial
number of a submenu to display the submenu.
5. Press (Back) to return to the previous menu or
quit the function menu.
(Select) or to display the
7
Loading...