Huawei TE30, TE40, TE60, TE50, TX50 Quick Operation Manual
...
1
2
3
1. Press for 2s.
Q: How can I access the Conference Schedules window?
A: Press on the remote control to bring up the conferencing screen.
Then press the left or right arrow key to access the Conference Schedules
window.
HUAWEI
TE30&TE40&TE50&TE60&TX50&RP100&RP200
Quick Operation Guide
Select or control a camera
Switch between the local and
remote cameras
Go back to the previous screen
or close the current screen
Confirm the current selection
End a conference or
disconnect a site
Start or stop presentation sharing
Switch between layouts
Enter letters, digits, and symbols
or select a camera preset
Switch between text-entry methods
or display the virtual keyboard
Delete characters or a site
from a conference
Two-stage dialer
Zoom in / out
Power on or off the
endpoint
Increase / Decrease
the volume
Go to the menu screen
Scroll through the screen
or turn the camera
Place a call or
initiate a conrefence
Mute or unmute
the microphone
Enter dots used in
an IP address
Display help
information
Q: What should I do if the remote control is unresponsive when I try to use it?
A: The maximum operating distance of the remote control is 6 meters.
The remote control performance may also be affected by bright light.
Point it at the infrared sensor on the camera.
1 Power On
2 Join a Conference
An ongoing conference is indicated by .
2. Select an ongoing conference.
1. Press the left or right arrow keys to access the
Conference Schedules screen.
3. Press or .
3 Create a Conference
2. Enter the site name, IP address,
or number.
1. Press to access the conferencing screen.
3. Press or .
Q: How can I create a multi-party conference?
A: On the conferencing screen, press the left or right
arrow keys to access the Conference Schedules
screen. Then select Create Conference
and press .
4 Manage Conference Layouts
1. Press to switch to view sites only, view
presentation only, or view a combination of
sites and presentation.
Using cables:
Connect the audio and video output ports on the computer
to the audio and video input ports on the system.
2. Press to start the presentation.
5 Start Presentation
1. Connect to a presentation source.
Using the Air Content Sharing client:
A: On your computer, open a web browser and enter the endpoint IP
address in the address bar, then press Enter
. Click Download Air
Content Sharing in the upper left corner to download the Air Content
Sharing client. Then install it as prompted.
Q: How can I install the Air Content Sharing client?
a. On the computer desktop, double-click Air Content
Sharing.
b. Locate the presentation source and double-click it.
The message “An air content sharing source device
requests to connect to your endpoint. Accept?” is
displayed. Then select Accept and press .
3
1
3
1
4
6
7
添加会场
5
Q:
The Continuous Presence option is invisible
.
A:
Contact the administrator: Choose Advanced > Settings > Display >
Personalize
and set Select conference controls.
If the chairperson's password is required,
contact the administrator.
2. Press the arrow key to select Add Site
and press .
3. Search for a site you want to call, select
it, and press .
4. Press the arrow key to select Call and
press .
2. Press the arrow key to select
Continuous Presence and press .
3. Press the arrow keys to select your
preferred layout and press .
If the chairperson's password is required,
contact the administrator.
5. Press the arrow keys to select OK and
press .
6. Press the arrow key to select Broadcast
Site and press .
7. Select Continuous presence, press
, and press to view
continuous presence.
If the chairperson's password is required,
contact the administrator.
2. Press the arrow key to select Extend
Conference and press .
3. Enter the period of extension, press
the arrow key to select OK, and
press .
1. Press to invoke the main menu, select
Conference Control, and press .
HUAWEI Telepresence
Information Service Portal
The descriptions and figures in this document are for your reference only.
Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved
Website: http://e.huawei.com
Product version: V500R002C00
Release date:
2016-06-08
Document Issue: 04
6 Add Sites 7 Set Continuous Presence 7 Set Continuous Presence 8 Extend a Conference
4. Press the arrow keys to select a pane
andpress .Then select a site and
press .
1. Press to invoke the main menu, select
Conference Control, and press .
1. Press to invoke the main menu, select
Conference Control, and press .
OPEN SOURCE SOFTWARE NOTICE
Log in to the web interface, click Help
,
and click to open the online help, in
which you can view the details of OPEN
SOURCE SOFTWARE NOTICE.
2
1
2
1
2
1
2
1
1
2
2
1
2
1
1
1
1
2
2
1
2
1
2
2
Loading...