Huawei RNE LX3 User Manual

Quick Start Guide

RNE-L03, RNE-L23

Your device at a glance

Before you start, let's take a look at your new device.

•To power on your device, press and hold the power button until the screen turns on.

•To power off your device, press and hold the power button, and then touch .

	Flash	Light sensor
	Dual-lens	Secondary
	camera	microphone
	Fingerprint	Earpiece
	scanner	Front camera
		Status indicator
		Volume button
		Power button
		Selfie toning
		flash
	.KGJYKZ PGIQ	9VKGQKX
	6XOSGX_	3OIXU ;9( VUXZ
	SOIXUVNUTK

To force your device to restart, press and hold the power button until your device vibrates.

1

Getting Started

Follow the instructions in the following figures to set up your device.

NJD	SP4%

RNE-L03

or

NJD	SP4%

RNE-L23

• Do not insert or remove the SIM card when your device is powered on.

• Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device.

Be careful not to scratch your device or hurt yourself when using the eject pin. Store the eject pin out of the reach of children to prevent accidental swallowing or injury.

DoCautionnot use cut or modified SIM or microSD cards with your device as these may not be recognized and could damage

the card tray.

2

Dual card dual standby single pass

This description should only be used in conjunction with the RNE-L23.

Your device supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously.

•When you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls. If someone calls SIM card 2, the caller will hear a voice message similar to "The subscriber you dialed is out of the service area" or "The subscriber you dialed cannot be connected for the moment, please try again later." The actual message will vary by service provider.

•When you are using SIM card 1's data service, SIM card 2's

data service will be disabled.

Your device's single pass feature helps reduce power consumption and increase your device's standby time. It is not related to your service provider's network conditions.

It may be a good idea to contact your service provider and subscribe to missed call reminder and related assistance services to avoid the conflicts mentioned above.

3