Welcome to the bright new world of HUAWEI MediaPad 10
Link (HUAWEI MediaPad for short).
With HUAWEI MediaPad, you can:
> Surf the Internet at lightening-fast speeds.
> Take photos and record videos anytime anywhere.
> Enjoy the latest and hottest movies.
> Immerse yourself in an extraordinary audio experience.
> Lots more
HUAWEI MediaPad lets your imagination and creativity run
free. Start using it now to discover all the pleasant surprises
that await you.
All pictures and illustrations in this document are
for your reference only. The actual product may
vary.
1
2 Getting Started
HUAWEI MediaPad at a Glance
1Light sensor2Front camera
2
3Power key4Volume keys
1
2
5Microphone6Rear camera
Composite
7Card slot8
headphone/audioinput jack
Micro-USB Port(with
9
the charging function)
10Speaker
Installing the microSD Card
1. Open the card slot cover.
2. Insert the microSD card with its gold contacts facing
up, as indicated in the preceding figure. Push the card
inward until it clicks into place.
3
3. Close the card slot cover.
Do not remove the card slot cover from the tablet.
To remove the microSD card when HUAWEI MediaPad is
powered on, from the Home screen, touch > Storage >
Unmount SD card. Then open the card slot cover, and
gently press the microSD card. The microSD card then pops
out.
Charging the Battery
1. Connect your charger to the provided USB cable.
2. Connect the charger to a power outlet.
3. Connect your HUAWEI MediaPad to the USB cable to
start charging the battery.
With HUAWEI MediaPad powered on, the battery icon in the
status bar turns when the battery is fully charged.
Battery Usage Precautions
> If HUAWEI MediaPad has not been used for a long time
or the battery power is extremely low, you may not be
able to power it on immediately after you begin
charging the battery. This is normal. Allow the battery to
charge for a few minutes before attempting to power
your HUAWEI MediaPad on.
> The battery is rechargable. Rechargeable batteries
have a limited number of charge cycles. When your
HUAWEI MediaPad is used for a long time, its standby
time will decrease. To maximize its lifespan, do not
charge the battery too frequently.
4
> The time required to fully charge the battery depends
on the ambient temperature and the age of the battery.
Powering On or Off
Powering On
Press and hold the power key until HUAWEI MediaPad
vibrates.
If HUAWEI MediaPad has not been used for a long
time or the battery level is low, you may not be able
to power it on immediately after you start charging
the battery. Allow the battery to charge for a few
minutes before attempting to use it.
Powering Off
Press and hold the power key until a dialog box is displayed.
Then follow the onscreen instructions to power off HUAWEI
MediaPad.
5
Gestures
The following simple finger gestures make it easy to use
your HUAWEI MediaPad.
Touch: Touch an item to select or open it.
Double-click: Touch the screen twice
consecutively to zoom in.
Touch and hold: Touch and hold the
screen to display an options menu.
Flick: Flick up or down to scroll up or down.
Flick left or right to switch between screens.
Drag: Touch and hold an item to drag it to
another position.
6
Pinch: Pinch two fingers together or apart
to zoom in or out. You can use this gesture
when browsing photos and web pages.
Unlocking the Screen
HUAWEI MediaPad supports multiple screen unlock
methods. The default unlock method is used here as an
example to illustrate how to unlock the screen.
1. Press the Power key to wake up the screen.
2. Drag to the right until it reaches .
7
> When the screen lock is set to 2D unlock mode,
flick left or right in the clock area on a locked screen
to switch to the Music+ player.
> You can drag to the shortcut icons on the top,
left, or bottom to quickly access the corresponding
applications.
Home Screen
HUAWEI MediaPad has an easy-to-use screen layout. This
section describes the screen elements and basic operations.
1View recent and running applications.
2Return to the Home screen.
3Return to the previous screen.
8
Display the time, Wi-Fi connection status, signal
SD
4
strength, battery level, and more. Touch the
clock to open the notification panel.
Hide the operation bar. To open the operation
5
bar, gently slide upward from the bottom of the
screen.
6Display widgets and applications.
7Add widgets.
Notification and Status Icons
The notification bar displays notifications and icons to inform
you of HUAWEI MediaPad's status.
Airplane modeBluetooth on
GPS in useCharging
Battery fullBattery low
New emails
Upcoming eventAlarms enabled
UploadingDownloading
Preparing the
microSD card
9
Sign-in or
Memory full
synchronization
problem
Synchronizing data
Connected to a
computer
Wi-Fi networks
available
Connected to the
Internet
Synchronization
failed
USB tethering on
Connected to a WiFi network
———
> When is displayed, charge your HUAWEI
MediaPad as soon as possible; otherwise it will
automatically power off soon.
> When your storage space is full, is displayed.
Delete some files or applications; otherwise you will
not be able to install or run applications on
HUAWEI MediaPad.
Notification Panel
HUAWEI MediaPad can execute multiple tasks
simultaneously. For example, you can browse the Internet
while downloading applications. You can check the task
progress or results using the notification panel.
10
Touch the status bar in the lower right corner of the screen to
open the notification bar. You can then check task progress
and new notifications.
You can also perform the following operations:
> Touch or other icons to enable or disable the
corresponding functions, such as Wi-Fi and Bluetooth.
> Touch to display the settings screen.
> Slide your finger left or right across a notification to
delete it.
> Touch to clear the notification panel.
To close the notification panel, touch the Home screen.
Operations on the Home Screen
> To open an application, from the Home screen, touch
the application icon.
11
> To switch between screens, from the Home screen,
flick left or right.
12
> To customize the Home screen, touch and hold a blank
area on the Home screen to display an options menu,
from which you can choose to customize the wallpaper,
widgets, and more.
13
3 Text Input
Bringing Up and Hiding the Onscreen Keyboard
HUAWEI MediaPadis pre-installed with multiple text input
methods. You can conveniently enter text using the
onscreen keyboard.
> To bring up the onscreen keyboard, touch a text input
field.
> To hide the onscreen keyboard, touch .
If the onscreen keyboard blocks some of the
operation buttons, hide the onscreen keyboard to
facilitate your operations.
Selecting an Input Method
To switch between input methods:
1. Touch a text field to bring up the onscreen keyboard.
2. Touch in the notification bar.
3. From the displayed options menu, select the desired
input method.
From the Home screen, touch > Language & input to set the default input method.
14
Editing Text
7
You can copy, cut, and paste text using the onscreen
keyboard.
1. To edit text, touch and hold the text field until two blue
cursors appear.
2. Drag the cursors to select the text you want to edit.
3. Touch Select all, Copy, or Cut to perform the
corresponding operation. You can also touch the
delete button on the onscreen board to delete the
selected text.
Android Input Method
1Switch to the next text input field.
2Switch to number and symbol input mode.
3Switch between upper and lower cases.
15
Open the Input options menu, where you can
select the input language or configure the
4
Android input method settings, for example,
enable or disable auto-capitalization and sound
on keypress.
5Enter a space.
6Start a new line.
> Touch to delete the character to the left of the
7
cursor.
> Touch and hold to delete all characters to the
left of the cursor.
The preceding figure is for your reference only. The
keys may look slightly different.
Huawei Input Method
16
1Switch between upper and lower cases.
2Switch to number and symbol input mode.
3Select an input language.
4Enter a space.
5Start a new line.
> Touch to delete the character on the left of the
6
cursor.
> Touch and hold to delete all characters on the
left of the cursor.
17
Loading...
+ 52 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.