Do not switch on your phone when using the phone is prohibited or
when using the phone may cause interference or danger.
Do not use your phone while driving.
Follow the rules or regulations set forth by the hospitals and health
care facilities. Switch off your phone near medical apparatus.
Switch off your phone in an aircraft. The phone may cause
interference to control signals of the aircraft.
Switch off your phone near high-precision electronic devices. The
phone may affect the performance of these devices.
Do not attempt to disassemble your phone or its accessories. Only
qualified personnel are allowed to service or repair the phone.
Do not place your phone or the accessories in containers with strong
electromagnetic field.
Do not place magnetic storage media near your phone. Radiation
emitted from the phone may erase the information stored on the
magnetic storage media.
Do not place your phone in a high-temperature place or where it can
come in contact with flammable gas, such as a gas station.
Keep your phone and its accessories away from children. Do not
allow children to use your phone without guidance.
Use only approved batteries and chargers to avoid explosion.
Observe the laws or regulations on using the phone. Respect others'
privacy and legal rights when using your phone.
Before using the phone, read safety precautions and inform your children
about using the phone correctly and safely. For details, see "Warnings and
Precautions" on page 43.
No part of this document may be reproduced or transmitted in any form or
by any means without prior written consent of Huawei Technologies Co.,
Ltd.
The product described in this manual may include copyrighted software of
Huawei Technologies Co., Ltd and possible licensors. Customers shall not
in any manner reproduce, distribute, modify, decompile, disassemble,
decrypt, extract, reverse engineer, lease, assign, or sublicense the said
software, unless such restrictions are prohibited by applicable laws or such
actions are approved by respective copyright holders under licenses.
Trademarks and Permissions
, HUAWEI, and are trademarks or registered trademarks of
Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the
property of their respective owners.
Notice
Some features of the product and its accessories described herein rely on
the software installed, capacities and settings of local network, and may
not be activated or may be limited by local network operators or network
service providers, thus the descriptions herein may not exactly match the
product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any
information or specifications contained in this manual without prior notice
or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS".
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and
regulations and will obtain all necessary governmental permits and licenses
in order to export, re-export or import the product mentioned in this
manual including the software and technical data therein.
Conventions
Operation
Meaning
Press and
hold
Press a key for two to three seconds and then release it.
Press
Press a key and release it quickly.
Format
Meaning
Bold
Any string displayed on the phone screen is in boldface,
such as "Messages".
>
Multi-level menus are spearated by ">". For example,
"Messages > MMS" indicates "MMS" is the submenu of
"Messages".
Symbol
Description
Meaning
Caution
Warnings and precautions for operations
Note
Complementary descriptions for operations
Term Conventions
This manual refers to HUAWEI M735 CDMA mobile phone as "the
phone" or "your phone".
Operation Conventions
GUI Conventions
Symbols
Table of Contents
1 Getting to Know Your Phone ............................................ 1
Your Phone ........................................................................................ 1
Keys and Functions ........................................................................... 2
16 Warnings and Precautions ............................................ 43
17 Futurewei Technologies, Inc. Limited Warranty ........ 52
iii
1 Getting to Know Your Phone
12
13
14
9
10
11
1
8
2
3
7
4
6
5
1
Earpiece
8
Volume Keys
2
Screen
9
Camera
3
Talk/Send Key
10
Speaker
Your Phone
1
4
Microphone
11
Stylus Pen
5
Navigation Keys
12
Strap Hole
6
End/Power Key
13
Charger Interface/Data Cable
Connecter
7
Camera Key
14
Headset Jack
Press …
To …
Access the all calls menu in standby mode.
Dial a number or answer a call.
Power on or power off the phone by pressing and
holding the key.
End a call or reject a call.
Return to the standby screen.
Turn on or turn off the screen backlight in standby
mode.
: Access Contacts in standby mode; increase the
volume during a call.
Keys and Functions
2
Press …
To …
: Access the Messages menu in standby mode;
access the screen for writing a message by pressing and
holding the key; decrease the volume during a call.
: Access metroWEB in standby mode; decrease
the volume during a call.
: Access @metro App Store in standby mode;
increase the volume during a call.
Access the main menu in standby mode.
Confirm a selection in menu mode.
Start playing music after the music player is launched.
Increase the volume in standby mode or during a call and
music playing.
Decrease the volume in standby mode or during a call and
music playing.
Launch the camera in standby mode by pressing and
holding the key.
Take a picture after the camera is launched.
3
Icon
Description
Indicates the signal strength. The more the bars are, the
stronger the signal is.
There is an incoming call; a call is being set up; or the phone
is in conversation.
The voice privacy function is enabled.
The phone is in the roaming status.
A new message is received.
The memory for messages is full.
An urgent message is received.
A new voice mail is received.
A new PUSH message is received.
The PUSH message is full.
A new MMS is received.
The MMS is full.
Screen Icons
4
Icon
Description
MicroSD Card.
The AGPS indicator mode is Location On.
The alert type is Ring.
The alert type is Ring & Vibration.
The alert type is Vibration.
The alert type is Silence.
An alarm clock is set.
Indicates the battery power level. The more the bars are, the
higher the remaining battery level is.
The battery power level is extremely low.
The Bluetooth function is activated.
The phone is receiving date through Bluetooth.
The phone is sending data through Bluetooth.
The Bluetooth headset is activated.
5
2 Getting Started
Installing the Battery
Charging the Battery
To charge the battery, do as follows:
1. Connect the travel charger to the charger interface at the top of your
phone.
2. Connect the charger to an AC power socket.
During the charging process, the icon on the upper right corner of the
screen is in an animated status.
3. Wait until the phone is completely charged.
If the icon becomes static, the battery is completely charged.
4. Disconnect the charger from the AC power socket.
5. Disconnect the charger from the phone.
6
Do not use a damaged battery or charger.
Before using the travel charger, ensure that the battery is
installed in your phone.
Powering On/Off the Phone
To power on the phone, press and hold until the screen backlight is
on.
To power off the phone, press and hold until the power-off prompt
is displayed.
Using the Stylus
You can use the stylus to select an item by tapping on the touch screen of
your phone.
Stylus Operations
To perform an operation with the stylus, you can do as follows:
Tap: Select an item or display a menu by touching the stylus to the
screen.
Drag: Select multiple characters in on-screen keyboard mode or move
an object by moving the stylus on the screen.
Screen Calibration
When operating the phone with the stylus, if the phone cannot respond to
your operation correctly, you can calibrate the screen as follows:
Tap Settings > Display Settings > Screen Calibration to access the
screen for calibration.
Calibrate the screen by tapping the center of + displayed on the screen
according to the instructions.
7
During the calibration, tap the center of + accurately, to ensure
that the phone can respond to your tap and text entry on the
screen correctly after the calibration.
The resolution of the phone screen is 240 × 320. Therefore,
when viewing pictures, a picture with a resolution higher than
240 × 320 may be displayed improperly.
Dragging and Flicking
On following screens, you can perform some operations conveniently
through dragging on the touch screen:
On the standby screen, tap and drag the title, clock, or date to change the
position of the selected item.
In the menu list, drag up or down to scroll. Then tap a submenu to select
it.
When viewing pictures, flick right or left to switch a picture to the next
or previous one.
8
Standby Screen
1
2
3
4
Description
1
The icons indicating the status, such as the signal strength,
battery level, and current profile are displayed.
2
By default, the name of the network operator is displayed.
You can tap it to set a customized title.
Tap Settings > Display Settings > Banner to change the title
content.
3
The information about the playing music player is displayed.
Tap this area to access the music player.
4
Tap to access the dialer.
9
Description
Tap to access Messages.
Tap to access the main menu.
Tap to lock the keypad.
10
3 Voice Services
In standby mode, you can press to view call logs. Then
select a number and press to dial the number.
Making a Call
1. In standby mode, tap to access the dialer.
2. Enter the phone number on the dialer.
For international calls, tap * twice consecutively to enter the plus sign
(+). Then enter the country or region code, area code, and phone number
in sequence.
For extension numbers, enter the phone number, tap * three or four
times consecutively to enter P or T, and then enter the extension
number.
3. Press or tap to dial the number.
4. Press or tap to end the call or cancel the dialing.
Answering a Call
When there is an incoming call, you can press or , or tap
to answer the call; press or tap to reject the call.
When the any-key answer function is enabled, you can press any key
(except and ) to answer the call.
11
Loading...
+ 47 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.