Huawei F617 50 User Manual
F617
User Guide
1 Getting to know your F617
1
2
3
4
5
678
1
Left function key
Access the main menu in standby mode.
Select the option displayed in the lower left corner
of the screen.
2
Navigation keys
Access the main menu by pressing the OK key in
standby mode.
Access a shortcut menu by pressing the
corresponding navigation key in standby mode.
Adjust the volume by pressing the navigation keys
during a call.
The figures in this guid e are provided for your reference only.
Front view
1
3
Right function
key
Select the option displayed in the lower right corner
of the screen.
4
Mute key
Press this key to mute or unmute an ongoing call.
5
End key
End or reject a call.
Press and hold this key to power the phone on or
off.
Return to the standby mode.
6
Hands-free key
Make or answer a call without lifting the handset in
standby mode.
In the hands-free mode, cancel the dialing when
dialing a number or end the current call.
7
Call key
Make or answer a call.
View the dialed calls in standby mode.
8
Number and
symbol keys
Enter numbers, letters, and symbols.
Speed-dial a user-assigned phone number by
pressing and holding 2~9 key in standby mode.
Press # key to switch between text input methods
in editing mode.
Press * key to display the symbol list in editing
mode.
2
Back and side view
3 4 5 6
7
1 2
1
Battery cover
2
SIM card slot
3
Battery container
4
Battery cord jack
5
Coiled cord jack on main unit
6
Power jack
7
USB port (only for
maintenance purposes)
Full reception
Calling
No service
Alarm clock
Hands-free mode
Unread message
Unopened voicemail
message
Powered by the power
adapter
Full battery
Update available
2G network
3G network
In silent profile
2 Screen icons
3
3 Installation
Do not frequently remove the SIM card when using F617.
When new phones are delivered, the battery power is low. Therefore, charge the
phone for a while and then power on the phone the f irst time you use it.
If the phone will not be used for a long t ime, remove the battery from the phone.
Ensure that F617 is powered off and disconnected from the power adapter.
Installing the SIM card
Ensure that the golden contacts of the SIM card are facing downward and that the
beveled edge of the SIM card is properly aligned with that of the SIM card slot. Then
check that the SIM card is fully inserted.
Installing the battery
Ensure that the battery is correctly installed.
4
Connecting the power adapter
If the battery has not been used for a long time or the battery is exhausted, the
screen of F617 may not function when you charge the battery again. This is normal.
After the battery is being charged for a while, you can power on the phone for use.
The battery supplies power for only a limited period. Ensure that the battery has
been fully charged before putt ing it in use.
Press and hold to power off the phone.
You can also use the following methods to dial the number:
In standby mode, press t o view the dialed calls. Find the desired number in
the dialed calls, and then press to dial the number.
Find the desired number in the contacts, and then press to d ial the number.
When you use F617, it is recommended that you connect the power adapter to F617.
4 Powering on
Press and hold until the screen lights up to power on the phone.
5 Calling
Making a call
1. In standby mode, press the number keys to enter a phone number.
2. Press to dial the number.
3. Press to end the call or cancel the dialing.
5
Loading...