Huawei F362 User Guide

F362 Cordless Phone

User Guide

1 Getting to know your F362

1

2

3

45

6

7

8

The figures in this guide are provided for your reference only.

1 Navigation keys 2 Right function key

3 End key 4 Power indicator

5 Microphone 6 Number and symbol keys

7 Call key 8 Left function key

1

2 Keys

Number
and
symbol
keys

 Access the main menu in standby mode.

 Select the option displayed in the lower left corner

of the screen.

 Make or answer a call.

 View the dialed calls in standby mode.

 Enter numbers, letters and symbols.

 Call voicemail in standby mode (by pressing and

holding the 1 key).

 Number keys 2~9：Speed-dial a user-assigned

phone number by pressing and holding a key i n
standby mode.

 Press # key to switch between text input

methods in editing mode.

 Press * key to display the symbol list in editing

mode.

 End or reject a call.

 Press and hold this key to power the phone on or

off.

 Return to the standby mode.

Select the option displayed in the lower right corner
of the screen.

2

 Access the main menu by pressing the OK key in

standby mode.

 Access a shortcut menu by pressing the

corresponding navigation key in standby mode.

 Adjust the volume by pressing the navigation

keys during a call.

3 Screen icons

Full reception

Alarm clock

Silent profile
activated

Full battery

Unread message

4 Installation

Ensure that F362 is powered off and disconnected from the power
adapter.

Installing the SIM card

Ensure that the golden contacts of the SIM card are facing downward
and that the beveled edge of the SIM card is properly aligned with that
of the SIM card slot. Then check that the SIM card is fully inserted.

3

Do not frequently remove the SIM card when using F362.

Installing the battery

Ensure that the battery is correctly installed.

4

 When new phones are delivered, the battery power is low.

If the phone will not be used for a long time, remove the battery

Therefore, charge the phone for a while and then power on the
phone the first time you use it.



from the phone.

Charging the battery

Method 1: Method 2:

If the battery has not been used for a long time or the battery is
exhausted, the screen of the phone may not function when you
charge the battery again. This is normal. After the battery is being
charged for a while, you can power on the phone for use.

5 Powering on

Press and hold until the screen lights up to power on the phone.

Press and hold to power off the phone.

5

6 Calling

Making a call

1. In standby mode, press the number keys to enter a phone number.

2. Press to dial the number.

3. Press to end the call or cancel the dialing.

You can also use the following methods to dial the number:

 In standby mode, press to view the dialed calls. Find the

desired number in the dialed calls, and then press to dial
the number.

 Find the desired number in the contacts, and then press

to dial the number.

Answering or rejecting a call

When there is an incoming call, press to answer the call; press

to reject the call.

6

7 Messages

Sending a message

1. Select Message > Write message.

2. Write the message.

3. Press and then add a recipient using the following methods:

 Enter the recipient's phone number.

 Add the recipient from the contacts.

4. Press to send the message.

Reading a message

1. Select Message > Inbox.

2. Press / to scroll to a message in the list.

3. Press to open and read the message.

Press to manage the message.

8 Text input methods

Input methods functions

The input methods have following basic functions:

 In editing mode, press the # key to switch between input methods.

7