The following topics introduce you to the features of your new device.
Package Contents
After opening the package, check to make sure that you have all the parts shown below. If any
item is missing or broken, please contact Sprint.
Handset Base Handset Charging Stand
Handset Power Adapter Base Power Adapter Base Battery
Handset Battery Get Started Guide Important Information Booklet
Note: The figures in this guide are provided for your reference only.
Get Started 1
Appearance
No.
Item
Description
Left function Key
Talk key
The following illustrations outline your device's primary external features.
Front View
1
2
3
Navigation keys
●Access the phone’s menus and selects the
highlighted choice when navigating through a
menu by pressing the OK key.
●Access a shortcut menu by pressing the
corresponding navigation key in standby
mode.
●Adjust the volume by pressing the left or right
navigation keys during a call.
Select the option displayed in the lower left corner of
the screen.
● Make or answer a call.
● View the call log in standby mode.
Get Started 2
4
Voicemail key
Intercommunication
● Enter numbers, letters, and symbols.
● End or reject a call.
Right function Key
Power key
Mute key
Press this key to mute or unmute an ongoing call.
5
6
7
8
key
Number and symbol
keys
End key
Press this key to access the voicemail system.
Press this key to access the list of registered
handsets in standby mode.
●Number keys (2–9): Speed-dial a user-
assigned phone number by pressing and
holding a key in standby mode.
●# key: Switch between text input methods in
editing mode.
● * key: Display the symbol list in editing mode.
● Press and hold this key to power a handset
on or off.
9
10
11
Get Started 3
Page/Register key
●Return to the standby mode.
Select the option displayed in the lower right corner
of the screen.
Press and hold this key to power the base on or off.
●Press this key to page a handset. This helps
you to locate a handset that has been
misplaced.
●Press and hold this key to register a handset
with the base.
Screen Icons
Handset
Base
Icon Indicates… Icon Indicates…
Signal strength
Icon Indicates…
No service
Full battery
Low battery
Missed call
New voicemail messages
Handset alarm clock
TTY mode
Signal strength
Mute mode
Hands-free mode
In silent profile
Home number
Mobile number
Work number
Search contacts
HAC enabled
Get Started 4
Battery level
No service
New voicemail messages
Power adapter not connected
Installation
Installing the Battery
Turn off the phone and disconnect from the Power Adapter. Slide the battery into the slot by
aligning the gold colored contacts and press down until it is secure.
Base:
Handset:
Note: If the phone will not be used for a long time, remove the battery from the phone.
Connecting the Power Adapter to the Base
Installation 5
Note: When new phones are delivered, the battery power is low. Therefore, charge the phone
for a while and then power on the phone the first time you use it.
Note: The device takes approximately 5.5 hours to charge fully. The charge time may be
impacted by environmental factors.
Note: The base talk time is approximately 2.5 hours and standby time is approximately 12
hours. The handset talk time is approximately 7 hours and standby time is approximately
200 hours. Actual values will vary with the network environment.
Positioning the Device
Choose the best location for your device, avoid other electronic devices equipments.
Note: To avoid the interference caused by radio signals, place the device at least 3 meters
(9.84 feet) away from other Wi-Fi devices.
Installation 6
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.