Huawei EchoLife HG8010, EchoLife HG8110, EchoLife HG8240, EchoLife HG8245, EchoLife HG8247 Service Manual

...

Download

EchoLife HG8010/HG8110/HG8240/HG8245/ HG8247/HG8447 GPON Terminal

V100R002C06&C07

Service Manual

Issue 02

Date 2011-12-08

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang Shenzhen 518129 People's Republic of China

Website: http://www.huawei.com

Email: support@huawei.com

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual About This Document

About This Document

Overview

GPON terminal EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 (hereafter referred to as the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447) is an indoor optical network terminal (ONT) designed for home users and small office and home office (SOHO) users. This document provides the appearance and specifications of the HG8010/HG8110/ HG8240/HG8245/HG8247/HG8447, and describes its configuration and usage, which helps you know the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 quickly.

Product Version

The following table lists the product versions related to this document.

Product Name

EchoLife HG8010/ HG8110/HG8240/HG8245/ HG8247/HG8447

Intended Audience

The intended audience of this document is as follows:

l Technical support engineers

l Maintenance engineers

Update History

Product Version

V100R002C06&C07

Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions.

Updates in Issue 02 (2011-12-08)

Modified the figure of VoIP Basic Configuration.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual About This Document

Updates in Issue 01 (2011-03-02)

This is the first release for the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 V100R002C06&C07. It is the first archive.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

iii

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual Contents

About This Document.....................................................................................................................ii

1 Safety Precautions.........................................................................................................................1

2 System Overview...........................................................................................................................3

2.1 Product Introduction...........................................................................................................................................4

2.1.1 Appearance................................................................................................................................................4

2.1.2 Ports...........................................................................................................................................................7

2.1.3 LEDs........................................................................................................................................................17

2.2 Typical Network Applications..........................................................................................................................23

3 Configuration...............................................................................................................................28

3.1 Before Your Start..............................................................................................................................................29

3.2 Configuring the Service by Using the NMS.....................................................................................................31

3.2.1 Data Plan..................................................................................................................................................31

3.2.2 Configuring GPON FTTH Layer 2 Internet Access Service on the NMS..............................................36

3.2.3 Configuring GPON FTTH Layer 3 Internet Access Service on the NMS..............................................48

3.2.4 Configuring GPON FTTH Voice Service (H.248 Protocol) on the NMS...............................................62

3.2.5 Configuring GPON FTTH Voice Service (SIP Protocol) on the NMS...................................................78

3.2.6 Configuring GPON FTTH Layer 2 Multicast Service on the NMS........................................................94

3.2.7 Configuring GPON FTTH Layer 3 Bridge Multicast Service on the NMS..........................................110

3.3 Configuration by Using OLT Commands......................................................................................................129

3.3.1 Data Plan................................................................................................................................................129

3.3.2 Configuring the GPON FTTH Layer 2 Internet Access Service on the OLT CLI................................132

3.3.3 Configuring the GPON FTTH Layer 3 Internet Access Service on the OLT CLI................................139

3.3.4 Configuring the GPON FTTH VoIP Service (H.248 Protocol) on the OLT CLI.................................151

3.3.5 Configuring the GPON FTTH VoIP Service (SIP Protocol) on the OLT CLI.....................................167

3.3.6 Configuring the GPON FTTH Layer 2 Multicast Service on the OLT CLI.........................................182

3.3.7 Configuring the GPON FTTH Layer 3 Bridge Multicast Service on the OLT CLI..............................190

3.4 Configuration on the Web Page......................................................................................................................203

3.4.1 Preparations...........................................................................................................................................203

3.4.2 Data Plan................................................................................................................................................213

3.4.3 Locally Logging in to the Web Interface...............................................................................................215

3.4.4 Configuring the Internet Access Service on the Web Page...................................................................217

3.4.5 Configuring the SIP-based Voice Service on the Web Page.................................................................220

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual Contents

3.4.6 Configuring the H.248-based Voice Service on the Web Page.............................................................224

3.4.7 Configuring the Wi-Fi Access Service on the Web Page......................................................................228

3.5 Configuring the Service by Using U2560......................................................................................................234

3.5.1 Preparations...........................................................................................................................................235

3.5.2 Data Plan................................................................................................................................................238

3.5.3 Configuring the Internet Access Service Through the U2560...............................................................240

3.5.4 Configuring SIP-based Voice Service Through the U2560..................................................................244

3.5.5 Configuring the H.248-based Voice Service Through the U2560........................................................251

3.5.6 Configuring the Wi-Fi Access Service Through the U2560.................................................................258

3.6 Operation Guide on the XML Configuration File..........................................................................................264

3.6.1 Operation Guide on the XML Configuration File (on the Web Page)..................................................265

3.6.2 Operation Guide on the XML Configuration File (on the U2000)........................................................266

4 Maintenance and Troubleshooting........................................................................................273

4.1 Frequently Used Methods for Troubleshooting..............................................................................................274

4.2 General Troubleshooting Flowchart and Methods.........................................................................................274

4.3 Tools Used for Troubleshooting.....................................................................................................................278

4.3.1 Digital Multimeter.................................................................................................................................278

4.3.2 Optical Power Meter..............................................................................................................................279

4.4 Remote Maintenance and Troubleshooting on the Web Page........................................................................282

4.4.1 Remotely Logging in to the Web Page..................................................................................................282

4.5 Maintenance and Troubleshooting on the NMS.............................................................................................284

4.5.1 PPPoE Dialup Emulation.......................................................................................................................284

4.5.2 Querying the Physical State of a POTS Port.........................................................................................286

4.5.3 Querying the Status of a VoIP User......................................................................................................288

4.5.4 Querying and Deleting VoIP Statistics..................................................................................................289

4.5.5 Caller Emulation Test............................................................................................................................290

4.5.6 Callee Emulation Test...........................................................................................................................292

4.5.7 Automatic Emulation Test.....................................................................................................................294

4.5.8 Local Loopback and Remote Loopback on a POTS Port......................................................................296

4.5.9 VoIP Loop-Line Test.............................................................................................................................298

4.6 Maintenance and Troubleshooting on the OLT CLI......................................................................................299

4.6.1 Querying and Deleting Performance Statistics of an ETH Port............................................................299

5 Web Page Reference..................................................................................................................301

5.1 Status..............................................................................................................................................................303

5.1.1 WAN Information..................................................................................................................................303

5.1.2 VoIP Information...................................................................................................................................303

5.1.3 Wi-Fi Information..................................................................................................................................304

5.1.4 Eth Port Information..............................................................................................................................304

5.1.5 DHCP Server Information.....................................................................................................................305

5.1.6 Optic Information..................................................................................................................................305

5.1.7 Battery Information...............................................................................................................................306

5.1.8 Device Information................................................................................................................................306

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual Contents

5.1.9 Remote Management.............................................................................................................................306

5.2 WAN...............................................................................................................................................................307

5.2.1 WAN Configuration..............................................................................................................................307

5.3 LAN................................................................................................................................................................310

5.3.1 LAN Port Work Mode...........................................................................................................................310

5.3.2 LAN Host Configuration.......................................................................................................................311

5.3.3 DHCP Server Configuration..................................................................................................................311

5.4 WLAN............................................................................................................................................................314

5.4.1 WLAN Configuration............................................................................................................................314

5.5 Security...........................................................................................................................................................317

5.5.1 IP Filter Configuration...........................................................................................................................317

5.5.2 MAC Filter Configuration.....................................................................................................................318

5.5.3 URL Filter Configuration......................................................................................................................319

5.5.4 DoS Configuration.................................................................................................................................320

5.5.5 ONT Access Control Configuration......................................................................................................321

5.6 Route...............................................................................................................................................................322

5.6.1 Default Route Configuration.................................................................................................................322

5.6.2 Static Route Configuration....................................................................................................................323

5.6.3 Policy Route Configuration...................................................................................................................323

5.7 Forward Rules.................................................................................................................................................324

5.7.1 DMZ Configuration...............................................................................................................................324

5.7.2 PortMapping Configuration...................................................................................................................325

5.7.3 PortTrigger Configuration.....................................................................................................................326

5.8 Network Applications.....................................................................................................................................328

5.8.1 USB.......................................................................................................................................................328

5.8.2 ALG Configuration................................................................................................................................329

5.8.3 UPnP Configuration..............................................................................................................................329

5.8.4 ARP Configuration................................................................................................................................330

5.8.5 Portal Configuration..............................................................................................................................331

5.8.6 DDNS Configuration.............................................................................................................................331

5.8.7 IGMP Configuration..............................................................................................................................332

5.8.8 QoS Configuration.................................................................................................................................333

5.8.9 Terminal Limit Configuration...............................................................................................................333

5.9 Voice...............................................................................................................................................................334

5.9.1 VoIP Interface Configuration................................................................................................................334

5.9.2 VoIP User Configuration.......................................................................................................................341

5.10 System Tools................................................................................................................................................342

5.10.1 Reboot..................................................................................................................................................343

5.10.2 Configuration File................................................................................................................................343

5.10.3 USB Backup Restore CFG..................................................................................................................344

5.10.4 Firmware Upgrade...............................................................................................................................344

5.10.5 Restore Default Configuration.............................................................................................................345

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual Contents

5.10.6 Ping Test..............................................................................................................................................345

5.10.7 Log.......................................................................................................................................................346

5.10.8 ONT Authentication............................................................................................................................347

5.10.9 Time Setting........................................................................................................................................347

5.10.10 TR-069...............................................................................................................................................349

5.10.11 Advanced Power Management..........................................................................................................350

5.10.12 Modify Login Password....................................................................................................................350

6 Technical Specifications...........................................................................................................352

6.1 Physical Specifications...................................................................................................................................353

6.2 Protocols and Standards..................................................................................................................................353

7 Acronyms and Abbreviations.................................................................................................355

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

vii

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 1 Safety Precautions

1 Safety Precautions

To ensure normal running of the device, read the safety precautions carefully before operating the device, and comply with the precautions when performing the operations.

Basic Requirements

l Keep the device dry during storage, transportation, and running of the device.

l Prevent the device from colliding with other objects during storage, transportation, and

running of the device.

l Install the device in strict compliance with the vendor requirements.

l Do not uninstall the device without permission. Contact the specified service center when

a fault occurs on the device.

l No enterprise or personnel should modify the structure, security design, or performance

design of the device without authorization.

l Abide by local laws and regulations and respect the legal rights of others when using the

device.

Environment Requirements

l Install the device in a well-ventilated place that is not directly exposed to sunlight.

l Keep the device clean.

l Keep the device away from water sources or wet places.

l Do not place any objects on the device. This is to protect the device from damages, such

as overheat or distortion, which can be caused by such objects.

l Leave a space of at least 10 cm around the device for heat dissipation.

l Keep the device away from heat sources or fire sources, such as electrical heaters and

candles.

l Keep the device away from the electrical appliances with strong magnetic fields or strong

electric fields, such as microwave ovens, refrigerators, and mobile phones.

Instructions for Use

l Use the accessories delivered with the device, or use those recommended by the vendor,

such as the power adapter and battery.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 1 Safety Precautions

l The power supply voltage of the device must meet the requirements on the input voltage

of the device.

l Keep power plugs clean and dry to avoid electric shocks or any other hazards.

l Dry your hands before removing or inserting cables.

l Stop the device and switch off the power before removing or inserting cables.

l Switch off the power and remove all the cables, including the power cable, optical fibers,

and network cables, from the device during periods of lightning activity.

l Switch off the power and remove the power plug if the device needs to be shut down for a

long time.

l Protect the device from ingress of water or other liquids. If such an accident occurs, switch

off the power immediately and remove all the cables, including the power cable, optical fibers, and network cables, from the device. Contact the specified service center in the case of a device failure.

l Do not stamp, pull, drag, or excessively bend the cables because they may get damaged.

Damaged cables can cause a device failure.

l Do not use the cables that are damaged or have deteriorated.

l Do not look directly into the optical port on the device without eye protection. The laser

emitted from the optical port can injure your eyes.

l In case of any abnormalities, such as smoke, abnormal sound, or odor from the device,

immediately stop the device, switch off the power, and remove all cables, including the power cable, optical fibers, and network cables, from the device. Contact the specified service center in the case of a device failure.

l Prevent foreign objects such as metal objects from dropping into the device through the

heat dissipation mesh.

l Protect the outer case of the device from scratches, because the paint that peels off in the

scratched areas can cause device abnormalities. If the paint falls into the device it may cause short circuits. In addition, peeled-off paint can cause an allergic reaction to the human body.

l Ensure that the device is kept out of the reach of children. Guard against risks such as

children playing with the device or swallowing small parts of the device.

Instructions for Cleaning

l Before cleaning the device, stop the device from running, switch off the power, and remove

all cables, including the power cable, optical fibers, and network cables, from the device. When inserting and removing optical fibers, keep the optical fiber connectors clean.

l Do not use cleaning fluid or spray-on detergent to clean the outer case of the device. Use

a soft cloth instead.

Instructions for Environment Protection

l Put the retired device and batteries at the specified recycle place.

l Abide by local laws and regulations to handle packaging materials, run-out batteries and

retired devices.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

2 System Overview

About This Chapter

This topic provides the appearance and describes the typical network applications of the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447.

2.1 Product Introduction

This topic provides the appearance and describes the ports and LEDs of the HG8010/HG8110/ HG8240/HG8245/HG8247/HG8447.

2.2 Typical Network Applications

This topic describes the typical network applications of the HG8010/HG8110/HG8240/ HG8245/HG8247/HG8447.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

2.1 Product Introduction

This topic provides the appearance and describes the ports and LEDs of the HG8010/HG8110/ HG8240/HG8245/HG8247/HG8447.

The HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 is an indoor optical network terminal (ONT) designed for home users and small office and home office (SOHO) users. Its upper shell adopts the natural heat dissipation material, and its optical port adopts the dust-proof design with a rubber plug. The HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 is eyepleasing and energy-efficient. It can be deployed on a workbench or mounted on a wall, meeting users' deployment requirements in different scenarios.

By using the gigabit-capable passive optical network (GPON) technology, the HG8010/ HG8110/HG8240/HG8245/HG8247/HG8447 provides a high-speed data channel through a single optical fiber with an upstream rate of 1.244 Gbit/s and a downstream rate of 2.488 Gbit/ s. In this way, you can enjoy quality high-speed data service, voice service, and video service. In addition, the HG8245 and HG8247 provide reliable wireless access service, and convenient storage and file sharing services within a home network.

As an ONT, the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 provides convenient and efficient remote management functions. The HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 supports ONT Management and Control Interface (OMCI) protocol and the U2560 (Huawei TR-069 server) and manages all home terminals in a unified manner, thus implementing remote fault diagnosis, service provisioning, and performance statistics measurement.

2.1.1 Appearance

This topic provides the appearance of the HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447.

Figure 2-1, Figure 2-2, Figure 2-3, Figure 2-4,Figure 2-5 and Figure 2-6show the appearance

of the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Figure 2-1 Appearance of the HG8010

Figure 2-2 Appearance of the HG8110

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Figure 2-3 Appearance of the HG8240

Figure 2-4 Appearance of the HG8245

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Figure 2-5 Appearance of the HG8247

Figure 2-6 Appearance of the HG8447

2.1.2 Ports

This topic provides the appearance of the ports on the HG8010/HG8110/HG8240/HG8245/ HG8247/HG8447 and describes the functions of the ports.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Ports on the HG8010

Figure 2-7 and Figure 2-8 show the ports on the rear panel and side panel of the HG8010

respectively.

Figure 2-7 Ports on the rear panel of the HG8010

Table 2-1 Descriptions of the ports on the rear panel of the HG8010

Port and Button Function

Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream

OPTICAL

transmission.

The type of the optical connector connected to the OPTICAL port is SC/APC.

LAN

POWER

Indicate auto-sensing 10/100/1000M Base-T Ethernet ports (RJ-45), used for connecting to PCs or IP set-top boxes (STBs).

Indicates the power port, used for connecting to the power adapter or backup battery.

Figure 2-8 Ports on the side panel of the HG8010

Table 2-2 Descriptions of the ports on the side panel of the HG8010

Port and Button

Function

Indicates the power button. It is used to power on or power off the device.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Port and Button Function

Indicates the reset button. Press the button for a short time to

RESET

reset the device; press the button for a long time (longer than 10s) to restore the device to the default settings and reset the device.

Ports on the HG8110

Figure 2-9 and Figure 2-10 show the ports on the rear panel and side panel of the HG8110

respectively.

Figure 2-9 Ports on the rear panel of the HG8110

Table 2-3 Descriptions of the ports on the rear panel of the HG8110

Port and Button

Function

Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream

OPTICAL

transmission.

The type of the optical connector connected to the OPTICAL port is SC/APC.

LAN

TEL

BBU

POWER

Indicate auto-sensing 10/100/1000M Base-T Ethernet ports (RJ-45), used for connecting to PCs or IP set-top boxes (STBs).

Indicate VoIP telephone ports (RJ-11), used for connecting to the ports on telephone sets.

Indicates the external backup battery monitoring port, used for connecting to the backup battery for monitoring the battery.

Indicates the power port, used for connecting to the power adapter or backup battery.

Figure 2-10 Ports on the side panel of the HG8110

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Table 2-4 Descriptions of the ports on the side panel of the HG8110

Port and Button Function

Indicates the power button. It is used to power on or power off the device.

Indicates the reset button. Press the button for a short time to

RESET

reset the device; press the button for a long time (longer than 10s) to restore the device to the default settings and reset the device.

Ports on the HG8240

Figure 2-11 and Figure 2-12 show the ports on the rear panel and side panel of the HG8240

respectively.

Figure 2-11 Ports on the rear panel of the HG8240

Table 2-5 Descriptions of the ports on the rear panel of the HG8240

Port and Button

Function

Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream

OPTICAL

transmission.

The type of the optical connector connected to the OPTICAL port is SC/APC.

LAN1-LAN4

TEL1-TEL2

Indicate auto-sensing 10/100/1000M Base-T Ethernet ports (RJ-45), used for connecting to PCs or IP set-top boxes (STBs).

Indicate VoIP telephone ports (RJ-11), used for connecting to the ports on telephone sets.

ON/OFF

POWER

Indicates the power-on/power-off button, used for powering on or powering off the device.

Indicates the power port, used for connecting to the power adapter or backup battery.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Figure 2-12 Ports on the side panel of the HG8240

Table 2-6 Descriptions of the ports on the side panel of the HG8240

Port and Button Function

BBU

RESET

Ports on the HG8245

Figure 2-13 and Figure 2-14 show the ports on the rear panel and side panel of the HG8245

respectively.

Figure 2-13 Ports on the rear panel of the HG8245

Indicates the external backup battery monitoring port, used for connecting to the backup battery for monitoring the battery.

Indicates the reset button. Press the button for a short time to reset the device; press the button for a long time (longer than 10s) to restore the device to the default settings and reset the device.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Table 2-7 Descriptions of the ports on the rear panel of the HG8245

Port and Button Function

Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream

OPTICAL

transmission.

The type of the optical connector connected to the OPTICAL port is SC/APC.

LAN1-LAN4

TEL1-TEL2

ON/OFF

POWER

Indicate auto-sensing 10/100/1000M Base-T Ethernet ports (RJ-45), used for connecting to PCs or IP STBs.

Indicate VoIP telephone ports (RJ-11), used for connecting to the ports on telephone sets.

Indicates the power-on/power-off button, used for powering on or powering off the device.

Indicates the power port, used for connecting to the power adapter or backup battery.

Figure 2-14 Ports on the side panel of the HG8245

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Table 2-8 Descriptions of the ports on the side panel of the HG8245

Port and Button Function

BBU

USB

WLAN

WPS Indicates the WLAN data encryption switch.

RESET

Ports on the HG8247

Figure 2-15 and Figure 2-16 show the ports on the rear panel and side panel of the HG8247

respectively.

Figure 2-15 Ports on the rear panel of the HG8247

Indicates the external backup battery monitoring port, used for connecting to the backup battery for monitoring the battery.

Indicates the USB host port, used for connecting to a USB storage device.

Indicates the WLAN button, used for enabling or disabling the WLAN function.

Table 2-9 Descriptions of the ports on the rear panel of the HG8247

Port and Button

CATV

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

Function

Indicates the radio frequency (RF) port, used for connecting to a TV set.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Port and Button Function

Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream

OPTICAL

transmission.

The type of the optical connector connected to the OPTICAL port is SC/APC.

LAN1-LAN4

TEL1-TEL2

ON/OFF

POWER

Indicate auto-sensing 10/100/1000M Base-T Ethernet ports (RJ-45), used for connecting to PCs or IP STBs.

Indicate VoIP telephone ports (RJ-11), used for connecting to the ports on telephone sets.

Indicates the power-on/power-off button, used for powering on or powering off the device.

Indicates the power port, used for connecting to the power adapter or backup battery.

Figure 2-16 Ports on the side panel of the HG8247

Table 2-10 Descriptions of the ports on the side panel of the HG8247

Port and Button

BBU

USB

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

Function

Indicates the external backup battery monitoring port, used for connecting to the backup battery for monitoring the battery.

Indicate the USB host port, used for connecting to a USB storage device.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Port and Button Function

WLAN

WPS Indicates the WLAN data encryption switch.

RESET

Ports on the HG8447

Figure 2-17 and Figure 2-18 show the ports on the rear panel and side panel of the HG8447

respectively.

Figure 2-17 Ports on the rear panel of the HG8447

Indicates the WLAN button, used for enabling or disabling the WLAN function.

Table 2-11 Descriptions of the ports on the rear panel of the HG8447

Port and Button

CATV

Function

Indicates the radio frequency (RF) port, used for connecting to a TV set.

Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream

OPTICAL

transmission.

The type of the optical connector connected to the OPTICAL port is SC/APC.

LAN1-LAN4

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

Indicate auto-sensing 10/100/1000M Base-T Ethernet ports (RJ-45), used for connecting to PCs or IP STBs.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Port and Button Function

TEL1-TEL4

ON/OFF

POWER

Indicate VoIP telephone ports (RJ-11), used for connecting to the ports on telephone sets.

Indicates the power-on/power-off button, used for powering on or powering off the device.

Indicates the power port, used for connecting to the power adapter or backup battery.

Figure 2-18 Ports on the side panel of the HG8447

Table 2-12 Descriptions of the ports on the side panel of the HG8447

Port and Button

BBU

USB

WLAN

Function

Indicates the external backup battery monitoring port, used for connecting to the backup battery for monitoring the battery.

Indicate the USB host port, used for connecting to a USB storage device.

Indicates the WLAN button, used for enabling or disabling the WLAN function.

WPS Indicates the WLAN data encryption switch.

Indicates the reset button. Press the button for a short time to

RESET

reset the device; press the button for a long time (longer than 10s) to restore the device to the default settings and reset the device.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

2.1.3 LEDs

This topic provides the appearance of the LEDs on the HG8010/HG8110/HG8240/HG8245/ HG8247/HG8447 and describes the indications of these LEDs.

Figure 2-19, Figure 2-20, Figure 2-21, Figure 2-22, Figure 2-23 and Figure 2-24 show the

LEDs on the HG8010, HG8110, HG8240, HG8245, HG8247 and HG8447 respectively.

Figure 2-19 LEDs on the HG8010

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Figure 2-20 LEDs on the HG8110

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Figure 2-21 LEDs on the HG8240

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Figure 2-22 LEDs on the HG8245

Figure 2-23 LEDs on the HG8247

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Figure 2-24 LEDs on the HG8447

Table 2-13 Indications of the LEDs on the HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447

Silk Screen

Name Status Indication

Green: always on The device is powered on.

POWER

Power supply LED

Orange: always on

The device is powered by the backup battery.

Off The power supply is cut off.

PON

LOS

LAN1-LAN4

Authentication LED

Connection LED

Ethernet port LED

See Table 2-14.

Always on

Blinks

The Ethernet connection is in the normal state.

Data is being transmitted on the Ethernet port.

Off

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

The Ethernet connection is not set up.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Silk Screen Name Status Indication

TEL1-TEL2

Voice telephone port LED

USB USB port LED

Always on

Blinks quickly (twice per second)

Blinks slowly (once two seconds)

Off

The connection to the voice server is set up.

The connection to the voice server is set up and the telephone is in the off-hook or ringing state.

The ONT is registering with the voice server.

The connection to the voice server is not set up.

The USB port is connected and is

Always on

working in the host mode, but no data is being transmitted.

Blinks quickly (twice per second)

Off

Data is being transmitted on the USB port.

The system is not powered on or the USB port is not connected.

Always on The WLAN function is enabled.

WLAN

WLAN port LED

Blinks

Off The WLAN function is disabled.

Always on The WPS function is enabled.

WPS WPS port LED

Blinks

Off The WPS function is disabled.

Always on

CATV CATV port LED

Off

Table 2-14 Indications of PON and LOS LEDs

LED Status

No.

PON LOS

Data is being transmitted on the WLAN port.

A Wi-Fi terminal is accessing the system.

The CATV function is enabled and CATV signals are received.

The CATV function is disabled or CATV signals are not received.

Indication

1 Off Off The ONT is disabled by the OLT.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

LED Status

No.

PON LOS

Indication

2 Blinks quickly

(twice per second)

3 Always on Off

4 Off Blinks slowly

Blinks quickly

(twice per second)

Off The ONT is attempting to set up a

(once two seconds)

Blinks quickly (twice per second)

2.2 Typical Network Applications

This topic describes the typical network applications of the HG8010/HG8110/HG8240/ HG8245/HG8247/HG8447.

As a network terminal, the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 is deployed at the GPON access layer and connects home users and SOHO users to the Internet through optical upstream ports. On the local area network (LAN) side, the HG8010/HG8110/HG8240/ HG8245/HG8247/HG8447 provides abundant hardware ports to meet various network requirements of home users and SOHO users.

connection to the OLT.

The connection between the ONT and the OLT is set up.

The Rx optical power of the ONT is lower than the optical receiver sensitivity.

The OLT detects that the ONT is a rogue ONT.

Network Topology of the HG8010

Figure 2-25 shows the position of the HG8010 in a network.

Figure 2-25 Network topology of the HG8010

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

l In the upstream direction, the HG8010 is connected to the optical splitter and the network-

side OLT through the passive optical network (PON) port, namely the OPTICAL port, to provide integrated access services.

l In the downstream direction, the HG8010 is provides a 10/100/1000M Base-T Ethernet

port for connecting to a home gateway. The home gateway then can be connected to a PC, STB, or video phone to provide high-speed data and video services.

Network Topology of the HG8110

Figure 2-26 shows the position of the HG8110 in a network.

Figure 2-26 Network topology of the HG8110

l In the upstream direction, the HG8110 is connected to the optical splitter and the network-

side OLT through the passive optical network (PON) port, namely the OPTICAL port, to provide integrated access services.

l In the downstream direction, the HG8110 is connected to various terminals through the

following LAN-side ports to implement the triple play service:

– One 10/100/1000M Base-T Ethernet ports, which can be connected to terminals such

as PCs, STBs, and video phoned to provide the high-speed data and video services.

– One TEL ports, which can be connected to telephone sets or fax machines to provide

superior and cost-effective voice over IP (VoIP), fax over IP (FoIP), and modem over IP (MoIP) services.

Network Topology of the HG8240

Figure 2-27 shows the position of the HG8240 in a network.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

Figure 2-27 Network topology of the HG8240

l In the upstream direction, the HG8240 is connected to the optical splitter and the network-

side OLT through the passive optical network (PON) port, namely the OPTICAL port, to provide integrated access services.

l In the downstream direction, the HG8240 is connected to various terminals through the

following LAN-side ports to implement the triple play service:

– Four 10/100/1000M Base-T Ethernet ports, which can be connected to terminals such

as PCs, STBs, and video phoned to provide the high-speed data and video services.

– Two TEL ports, which can be connected to telephone sets or fax machines to provide

superior and cost-effective voice over IP (VoIP), fax over IP (FoIP), and modem over IP (MoIP) services.

Network Topology of the HG8245

Figure 2-28 shows the position of the HG8245 in a network.

Figure 2-28 Network topology of the HG8245

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

l In the upstream direction, the HG8245 is connected to the optical splitter and the network-

side OLT through the PON port, namely the OPTICAL port, to provide integrated access services.

l In the downstream direction, the HG8245 is connected to various terminals through the

following LAN-side ports to implement the triple play service:

– Four 10/100/1000M Base-T Ethernet ports, which can be connected to terminals such

as PCs, STBs, and video phones to provide the high-speed data and video services.

– Two TEL ports, which can be connected to telephone sets or fax machines to provide

superior and cost-effective VoIP, FoIP, and MoIP services.

– Two Wi-Fi antennas, which can connect to Wi-Fi terminals wirelessly to provide a

secure and reliable high-speed wireless network.

– One USB port, which can be connected to a USB storage device to provide convenient

storage and file sharing services within a home network.

Network Topology of the HG8247

Figure 2-29 shows the position of the HG8247 in a network.

Figure 2-29 Network topology of the HG8247

l In the upstream direction, the HG8247 is connected to the optical splitter and the network-

side OLT through the PON port, namely the OPTICAL port, to provide integrated access services.

l In the downstream direction, the HG8247 is connected to various terminals through the

following LAN-side ports to implement the triple play service:

– One CATV port, which can be connected to a TV set to provide high-quality CATV

service transmission.

– Four 10/100/1000M Base-T Ethernet ports, which can be connected to terminals such

as PCs, STBs, and video phones to provide the high-speed data and video services.

– Two TEL ports, which can be connected to telephone sets or fax machines to provide

superior and cost-effective VoIP, FoIP, and MoIP services.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 2 System Overview

– Two Wi-Fi antennas, which can connect to Wi-Fi terminals wirelessly to provide a

secure and reliable high-speed wireless network.

– One USB port, which can be connected to a USB storage device to provide convenient

storage and file sharing services within a home network.

Network Topology of the HG8447

Figure 2-30 shows the position of the HG8447 in a network.

Figure 2-30 Network topology of the HG8447

l In the upstream direction, the HG8447 is connected to the optical splitter and the network-

side OLT through the PON port, namely the OPTICAL port, to provide integrated access services.

l In the downstream direction, the HG8447 is connected to various terminals through the

following LAN-side ports to implement the triple play service:

– One CATV port, which can be connected to a TV set to provide high-quality CATV

service transmission.

– Four 10/100/1000M Base-T Ethernet ports, which can be connected to terminals such

as PCs, STBs, and video phones to provide the high-speed data and video services.

– Four TEL ports, which can be connected to telephone sets or fax machines to provide

superior and cost-effective VoIP, FoIP, and MoIP services.

– Two Wi-Fi antennas, which can connect to Wi-Fi terminals wirelessly to provide a

secure and reliable high-speed wireless network.

– One USB port, which can be connected to a USB storage device to provide convenient

storage and file sharing services within a home network.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

3 Configuration

About This Chapter

Context

This topic describes how to configure services through the NMS, the OLT CLI, the Web page or the U2560.

NOTE

l The procedures for configuring HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 are similar.

The following sections consider HG8247 as an example.

l The following descriptions use V800R008C01 as the OLT, U2000 V100R003C00 as the BMS, and

U2560 V100R002C00 as the TR-069 server. Screen shots may vary with different versions but the configuration procedures are similar. For details about configuration procedures, see the BMS configuration manuals.

3.1 Before Your Start

This section provides common methods for configuring ONT services.

3.2 Configuring the Service by Using the NMS

This topic describes how to configure Internet access service, VoIP service and IPTV service by using the NMS.

3.3 Configuration by Using OLT Commands

This topic describes how to configure the Internet access service, VoIP service and IPTV service by using OLT commands.

3.4 Configuration on the Web Page

This topic describes how to configure Internet access service, VoIP service and Wi-Fi service on the Web page.

3.5 Configuring the Service by Using U2560

This topic describes how to configure the Internet access service, VoIP service and Wi-Fi service by using U2560.

3.6 Operation Guide on the XML Configuration File

This topic describes how to issue the XML configuration files on the Web page and on the U2000.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

3.1 Before Your Start

This section provides common methods for configuring ONT services.

Methods for configuring ONT services include configuring services by using the OLT commands, U2000, Web interface, TR-069 server and by issuing XML configuration file. Table

3-1 shows the application scenario of each configuration method.

Table 3-1 Application scenario of each configuration method

Configurati on Method

OLT commands

U2000

Web interface

TR-069 server

Application Scenario

This method uses the OMCI protocol to configure ONT services. It can be used to add ONTs, configure ONT port attributes and port VLANs, and to enable the Layer 2 service channels between the OLT and ONTs. It can implement all configurations for Layer 2 services such as the Layer 2 Internet access service and the Layer 2 multicast service. In the case of configuring Layer 3 services such as the WAN port, ONT voice service, and Wi-Fi service, coordination of one or more other methods is required.

This method can be used to configure Layer 2 services for the ONT by using the OMCI protocol, and to configure ONT value-added service profile and customized parameters. Customized parameters can be configured after batch adding general configurations to facilitate configuration efficiency. This method is recommended in batch service provisionings.

This method uses Web interface of the ONT to configure related ONT parameters. In this method, batch configuration is not supported, and the coordination of OLT commands or the U2000 is required. It is simple and is generally used in the deployment.

All the configurable nodes of the ONT are defined on the TR-069 server. The TR-069 server supports real-time configuration and status query. In this method, the coordination of OLT commands or the U2000 is required.

Issuing XML configuration file

Table 3-2 lists configuration methods supported in the FTTH service.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

The ONT voice service and gateway involve a large amount of configuration information, most of which is not defined in the OMCI protocol and cannot be configured on Web interface or the U2000. This method functions as a supplement to Web interface and the U2000. In this method, the coordination of OLT commands or the U2000 is required. This method is not recommended because it is complex.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Table 3-2 Configuration methods supported in the FTTH service

Service Type

Layer 2 Internet access service

Layer 3 Internet access service

Layer 2 multicast service

Layer 3 bridge multicast service

Configurat ion by Using OLT Commands

Configurat ion by Using the U2000

Configurat ion by Using Web Interface

Supported Supported Configuratio

n is not needed.

Coordinatio n of other methods is required.

Supported Coordinatio

n of OLT commands or the U2000 is required.

Supported Supported Configuratio

n is not needed.

Coordinatio n of other methods is required.

Supported Coordinatio

n of OLT commands or the U2000 is required.

Configurat ion by Using TR-069 Server

Configuratio n not needed.

Coordinatio n of OLT commands or the U2000 is required.

Configuratio n is not needed.

Coordinatio n of OLT commands or the U2000 is required.

Configurat ion by Issuing XML Configurat ion File

Configuratio n not needed

Coordinatio n of OLT commands or the U2000 is required.

Configuratio n is not needed.

Coordinatio n of OLT commands or the U2000 is required.

Voice service

Wi-Fi service

Coordinatio n of other methods is required.

Not supported

Supported Coordinatio

n of OLT commands or the U2000 is required.

Not

Supported Supported Supported

supported

Coordinatio n of OLT commands or the U2000 is required.

The following section provides key technologies involved in these methods:

l ONT management and control interface (OMCI) is a protocol defined in ITU-T G.984.4.

OMCI defines the format and mechanism of the interactive messages between the GPON OLT and ONTs. It analyzes the service model of ONT services and defines a series of management entities used for the service description.

OMCI defines the format of the message exchanged between the GPON OLT and ONTs and the message acknowledgment and retransmission mechanism. In this way, the OMCI provides a logical channel for communication. Operators can manage and configure ONTs (including port attribute and port VLAN) using OLT commands or the U2000. In addition, OMCI supports configuring an ONT offline and restoring the ONT configuration after the ONU goes online. With this management mechanism, ONTs do not need to save their own configuration information. This facilitates service provisioning and ONT maintenance. The

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

OMCI configuration mainly indicates the Layer 2 service configuration such as the Layer 2 Internet access service and the Layer 2 multicast service.

l TR-069 is a WAN management protocol for CPEs. It implements automatic configuration

on ONTs by using auto-negotiation interactive protocol between the application control server (ACS) and the CPE. The TR-069 protocol supports the following management functions:

– Automatic configuration and dynamic service provision

– Software and firmware mapping management

– Status and performance monitoring

– Fault diagnosis

l The extensible markup language (XML) file can be configured in the following two ways:

– Issuing XML configurations by using Web interface: Web interface stores the

configuration information about the ONT in an XML configuration file, and imports the file for the ONT; then the ONT parses the configuration information in the file for processing and storing.

– Issuing XML configurations by using the U2000: The U2000 stores the configuration

information about the ONT in an XML configuration file, and transfers the file to the OLT by using FTP; then the OLT further transfers the file to the ONT by using the OMCI protocol; after receiving the file, the ONT parses the configuration information in the file for processing and storing.

CAUTION

l Web interface and the U2000 cannot use the same XML configuration file. The XML

configuration file of Web interface contains all configuration data, while the XML configuration file of the U2000 contains only part of the configuration data.

l H.248 and SIP can share the same XML configuration file, but the configurations

involving voice service need to be re-configured accordingly.

l The XML configuration file is generally exported for modifying, and then imported

back. Configuration rolls back or even factory defaults are restored if an incorrect XML configuration file is imported. When configuration parameters of an XML configuration file need to be modified, please contact Huawei technical engineers for help.

3.2 Configuring the Service by Using the NMS

This topic describes how to configure Internet access service, VoIP service and IPTV service by using the NMS.

3.2.1 Data Plan

This topic provides the data plan for the configuration examples of the GPON FTTH services. You can configure the services according to the data plan.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Data Plan

Table 3-3 Data plan for the GPON FTTH services

Service Type

Device managemen t

Item Settings Remarks

Upstream port of an

0/19/0 -

OLT

GPON port of the

0/2/1 -

OLT

ONT

l SN: 6877687714852901

l Name: ONT

l ONU Type: ONT

l ONU ID: 0

l Authentication Mode: SN

l Terminal Type: 247

l Software Version:

V1R002C06 or V1R002C07

MEF IP traffic profile

l Name: FTTx

l CIR: 20480

The MEF IP traffic profile is used on the ONT to control

l Outer Priority: 1

upstream and downstream traffic.

DBA profile

Line profile

l Name: FTTx

l T-CONT type: Maximum

Bandwidth

l Maximum Bandwidth:

32768

l Name: FTTx

l Mapping Mode: VLAN

l Qos Mode: Priority Queue

l T-CONT Index: 1

l DBA Profile: FTTx

l GEM Port Index: 1

l Priority Queue:1

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Service Type

Internet service

Item Settings Remarks

Service profile

l Name: FTTx

l Number of Pots Ports: 2

l Number of ETH Ports: 4

l Vlan Type: Translation

l C-VLAN: 100,1000

l S-VLAN: 100,1000

VLAN

l VLAN ID: 100

l Type: Smart VLAN

Service port

l Name: HSI

l VLAN ID: 100

l Interface Selection:

0/2/1/0/1

l Service Type: Multi-

Service VLAN

l User VLAN: 10

l Keep the upstream and

downstream settings the same: selected

l Upstream Traffic Name:

FTTx

IPTV service

ONT value-added services (Layer 3 routing)

VLAN

l Profile Name: ONT-HSI

l Vendor ID: HWTC(2011)

l Terminal Type: 247

l Version: V1R002C06–

V1R002C07

l WAN VLAN ID: 10

l Service Type: INTERNET

l Connection Type:

IP_Routed

l Addressing Type: PPPoE

(User Name: iadtest@pppoe, Password: iadtest)

l Priority: 1

l NAT function: enable

l Bound port: LAN1 (LAN1

is a Layer 3 LAN)

l VLAN ID: 1000

l Type: Smart VLAN

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Service Type

Item Settings Remarks

Service port

l Name: IGMP

l Vlan ID: 1000

l Interface Selection:

0/2/1/0/1

l Service Type: Multi-

Service VLAN

l User VLAN: 30

l Keep the upstream and

downstream settings the same: selected

l Upstream Traffic Name:

FTTx

Multicast VLAN

l IGMP Version: IGMP V3

l Work Mode: igmp_proxy

l VLAN ID: 1000

Program profile

l Name: program1

l Start IP Address: 224.0.1.1

l End IP Address: 224.0.1.1

l Source IP Address:

10.10.10.20

l Preview Profile: 0 (the

default value)

Multicast user

ONT value-added services (Layer 3 bridge)

l Alias: IGMPUserA

l Unlimited Band Width:

selected

l Select Service Port: service

virtual port named IGMP

l Profile Name: ONT-HSI

l Vendor ID: HWTC(2011)

l Terminal Type: 247

l Version: V1R002C06–

V1R002C07

l WAN VLAN ID: 30

l Priority: 4

l Service Type: INTERNET

l Connection Type:

IP_Bridged

l Bound port: LAN3 (LAN3

is a Layer 3 LAN)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Service Type

VoIP service

Item Settings Remarks

VLAN

l VLAN ID: 200

l Type: Smart VLAN

Service port

l Name: VOIP

l Vlan ID: 200

l Interface Selection:

0/2/1/0/1

l Service Type: Multi-

Service VLAN

l User VLAN: 20

l Keep the upstream and

downstream settings the same: selected

l Upstream Traffic Name:

FTTx

ONT value-added services (H.248)

l Profile Name: ONT-VoIP

l Vendor ID: HWTC(2011)

The software version that supports H.248 is

l Terminal Type: 247

V100R002C07.

l Version: V1R002C06–

V1R002C07

l WAN VLAN ID: 20

l Service Type: VoIP

l Connection Type:

IP_Routed

l Priority: 6

l Signaling Protocol: H248

l Primary MGC:

200.200.200.200

l MID Format: Domain name

l MGC Port: 2944

l MGC Domain name:

6877687714852901

l TID: A0 and A1

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Service Type

Item Settings Remarks

ONT value-added services (SIP)

l Profile Name: ONT-VoIP

l Vendor ID: HWTC(2011)

l Terminal Type: 247

l Version: V1R002C06–

V1R002C07

l WAN VLAN ID: 20

l Service Type: VoIP

l Connection Type:

IP_Routed

l Priority: 6

l Signaling Protocol: SIP

l Proxy Server:

200.200.200.200

l SIP Server Port: 5060

l Home Domain:

softx3000.huawei.com

l Digitmap: x.S|x.# (Default)

l User 1: Directory Number

is 88001234; Auth User Name is 88001234@softx3000.hua wei.com; Auth Password is iadtest1

l User 2: Directory Number

is 88001235; Auth User Name is 88001235softx3000.huawe i.com; Auth Password is iadtest2

The software version that supports SIP is V100R002C06.

3.2.2 Configuring GPON FTTH Layer 2 Internet Access Service on the NMS

This topic describes how to configure the high-speed Internet service when an ONT is connected to an OLT through a GPON port.

Context

For details of the data plan, see Data Plan.

Example Network

l The PC gains access to the Internet in PPPoE dialup mode.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

OLT

ONT

BRAS

LAN Switch

Optical splitter

U2000

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

l The ONT is connected to the GPBC card of the OLT through an optical fiber.

l The broadband remote access server (BRAS) provides the authentication, authorization,

and accounting (AAA) functions.

Figure 3-1 Configuring the GPON FTTH Internet service

Procedure

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

l Add the ONT to the U2000 in profile mode.

1. Configure an MEF IP traffic profile.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose Traffic Profile from the navigation tree.

b. Click the MEF IP Traffic Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Name: FTTx

– CIR: 20480

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Outer Priority: 1

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

2. Configure a DBA profile.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the DBA Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Name: FTTx

– T-CONT type: Maximum Bandwidth

– Maximum Bandwidth: 32768

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

3. Configure a line profile.

In a line profile, a GEM port can be bound to up to eight service streams. In a GEM port, different GEM connections need to be set up for different service streams.

In this example, the mapping between GEM ports and MDU-side services is implemented through VLANs, and the service streams of each service are mapped to GEM port 1. In addition, different GEM connections are set up for the management VLAN and the VLANs for the Internet, voice, and multicast services.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the Line Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Set Name to FTTx.

– Choose Base Info. from the navigation tree and set the parameters.

– Mapping Mode: VLAN

– Qos Mode: Priority Queue

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click T-CONT Info. in the navigation tree and choose ADD T-

CONT from the shortcut menu. In the dialog box that is displayed, set the

parameters.

– T-CONT Index: 1

– DBA Profile: FTTx

– Right-click T-CONT1 in the navigation tree and choose Add GEM Port

from the shortcut menu. In the dialog box that is displayed, set the parameters.

– GEM Port Index: 1

– Priority Queue: 1

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set

the parameter.

– GEM Connection Index: 0 (this parameter is set to 0 automatically)

– VLAN ID: 10 (Internet access user-side VLAN ID)

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set the parameter.

– GEM Connection Index: 1 (this parameter is set to 1 automatically)

– VLAN ID: 20 (Voice user-side VLAN ID)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set

the parameter.

– GEM Connection Index: 2 (this parameter is set to 2 automatically)

– VLAN ID: 30 (Multicast user-side VLAN ID)

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

4. Configure a service profile.

The service profile type should be consistent with the actual ONT type.

The number of ports configured in the service profile must be the same as the actual number of ONT ports. The flowing table lists the port capabilities ofHG8010/HG8110/ HG8240/HG8245/HG8247/HG8447. The HG8247 is used as an example.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Product Number of

ETH Ports

Number of POTS Ports

Number of CATV Ports

HG8010 1 - -

HG8110 1 1 -

HG8240 4 2 -

HG8245 4 2 -

HG8247 4 2 1

HG8447 4 4 1

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the Service Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Set Name to FTTx.

– Choose Base Info. from the navigation tree and set the parameters.

– Number of Pots Ports: 2

– Number of ETH Ports: 4

– Number of CATV Ports: 1

– Choose UNI Port from the navigation tree. In the window that is displayed,

right-click the record where Port Type is set to ETH and Port ID is set to 1, and choose UNI Port Configuration Properties from the shortcut menu.

In the dialog box that is displayed, set the parameters.

– In the dialog box that is displayed, right-click and choose Add, and

configure the parameters of VLAN switch.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Service Type: Translation

– S-VLAN: 10 (Internet access user-side VLAN ID)

– C-VLAN: 10 (Internet access user-side VLAN ID)

– Choose UNI Port from the navigation tree. In the window that is displayed,

right-click the record where Port Type is set to ETH and Port ID is set to 3, and choose UNI Port Configuration Properties from the shortcut menu.

In the dialog box that is displayed, set the parameters.

– In the dialog box that is displayed, right-click and choose Add, and

configure the parameters of VLAN switch.

– Service Type: Translation

– S-VLAN: 30 (Multicast user-side VLAN ID)

– C-VLAN: 30 (Multicast user-side VLAN ID)

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

5. Confirm the ONT.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

a. In the Main Topology, double-click the required OLT in the Physical Root

navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

b. Choose GPON > GPON Management from the navigation tree.

c. On the GPON UNI Port tab page, set the filter criteria to display the required

GPON UNI ports.

d. In the information list, right-click GPON UNI port 0/2/1 and choose Enable

ONU Auto Find from the shortcut menu.

e. Select the ONU tab page. Click the Auto Discover ONUs tab.

f. In the window that is displayed, select 6877687714852901 as the ONU record

and click Confirm.

– Name: ONT

– ONU ID: 0

– ONU Type: ONT

– On the Basic Parameters tab page, set the parameters.

– Line Profile: FTTx (click

next to Line Profile and select the line profile

named FTTx in the dialog box that is displayed)

– Service Profile: FTTx (click

next to Service Profile and select the

service profile named FTTx in the dialog box that is displayed)

– Authentication Mode: SN

– Terminal Type: 247

– Software Version: V1R002C06 (or V1R002C07)

g. Click OK.

l Configure the Internet service.

The prerequisite for performing operations in the navigation tree is to navigate to the NE Explorer of the OLT. To navigate to the NE Explorer of the OLT, do as follows: In the

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

1. Configuring the Information About the ETH Port of a GPON ONU

a. Choose GPON > GPON Management from the navigation tree.

b. On the GPON ONU tab page, set the filter criteria or click to display the

GPON ONUs.

c. In the information list, right-click the ONT record where Frame, Slot, Port, and

ONU ID are set to 0, 2, 1, and 0 respectively and click the The Ont's UNI Port Info tab in the lower pane.

d. On the The Ont's UNI Port Info tab page, right-click the record where UNI

Type is set to ETH and UNI ID is set to 1, and choose Modifyfrom the shortcut

menu.

e. In the dialog box that is displayed, set Default VLAN ID to 10.

f. Click OK.

2. Configure a service VLAN on the OLT side.

A service VLAN is the VLAN used for the Internet service.

a. Choose VLAN from the navigation tree.

b. On the VLAN tab page, right-click and choose Add from the shortcut menu.

c. In the dialog box that is displayed, set the parameters.

– VLAN ID: 100

– Type: Smart VLAN

– Attribute: Stacking

d. Click Next. Click the Upstream Port tab and add upstream port 0/19/0 as the

upstream port of the VLAN.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

e. Click Done.

3. Add a service virtual port on the OLT side.

a. On the VLAN tab page, select the record where VLAN ID is set to 100 and click

the ServicePort tab in the lower pane.

b. In the information list, right-click and choose Add from the shortcut menu.

c. In the dialog box that is displayed, set the parameters.

– Name: HSI

– VlAN Choice: Smart VLAN

– VLAN ID: 100 (SVLAN ID)

– Connection Type: LAN-GPON (when the physical port is a GPON port) or

LAN-EPON (when the physical port is an EPON port)

– Interface Selection: 0/2/1/0/1 (when the connection type is LAN-GPON) or

0/2/1/0 (when the connection type is LAN-EPON)

– Service Type: Multi-Service VLAN

– User VLAN: 10

– Keep the upstream and downstream settings the same: selected

– Upstream Traffic Name: ip-traffic-table_6 (it is recommended that you use

the default profile ip-traffic-table_6 because the OLT does not limit the rates of service streams in the management VLAN)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

d. Click OK.

----End

Result

Check whether the user successfully gains access to the Internet through dialup on the PC.

1. The LAN port of the ONT is connected to the Ethernet port of the PC properly.

2. Dial up on the PC using the PPPoE dialup software.

3. The user gains access to the Internet on the PC after the dialup is successful.

3.2.3 Configuring GPON FTTH Layer 3 Internet Access Service on the NMS

This topic describes how to configure the high-speed Internet service when an ONT is connected to an OLT through a GPON port.

Context

For details of the data plan, see Data Plan.

Example Network

l Users' PCs are connected to the ONT using the LAN ports. IP addresses of users' PCs are

allocated by the DHCP IP address pool on the ONT. PPPoE auto dialup is performed on the ONT.

l The ONT is connected to the GPBC card of the OLT through an optical fiber.

l The broadband remote access server (BRAS) provides the authentication, authorization,

and accounting (AAA) functions.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

OLT

ONT

BRAS

LAN Switch

Optical splitter

U2000

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Figure 3-2 Configuring the GPON FTTH Internet service

Procedure

l Add the ONT to the U2000 in profile mode.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

1. Configure an MEF IP traffic profile.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose Traffic Profile from the navigation tree.

b. Click the MEF IP Traffic Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Name: FTTx

– CIR: 20480

– Outer Priority: 1

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

2. Configure a DBA profile.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the DBA Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Name: FTTx

– T-CONT type: Maximum Bandwidth

– Maximum Bandwidth: 32768

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

3. Configure a line profile.

In a line profile, a GEM port can be bound to up to eight service streams. In a GEM port, different GEM connections need to be set up for different service streams.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the Line Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Set Name to FTTx.

– Choose Base Info. from the navigation tree and set the parameters.

– Mapping Mode: VLAN

– Qos Mode: Priority Queue

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click T-CONT Info. in the navigation tree and choose ADD T-

CONT from the shortcut menu. In the dialog box that is displayed, set the

parameters.

– T-CONT Index: 1

– DBA Profile: FTTx

– Right-click T-CONT1 in the navigation tree and choose Add GEM Port

from the shortcut menu. In the dialog box that is displayed, set the parameters.

– GEM Port Index: 1

– Priority Queue: 1

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set

the parameter.

– GEM Connection Index: 0 (this parameter is set to 0 automatically)

– VLAN ID: 10 (Internet access user-side VLAN ID)

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set the parameter.

– GEM Connection Index: 1 (this parameter is set to 1 automatically)

– VLAN ID: 20 (Voice user-side VLAN ID)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set

the parameter.

– GEM Connection Index: 2 (this parameter is set to 2 automatically)

– VLAN ID: 30 (Multicast user-side VLAN ID)

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

4. Configure a service profile.

The service profile type should be consistent with the actual ONT type.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Product Number of

ETH Ports

Number of POTS Ports

Number of CATV Ports

HG8010 1 - -

HG8110 1 1 -

HG8240 4 2 -

HG8245 4 2 -

HG8247 4 2 1

HG8447 4 4 1

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the Service Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Set Name to FTTx.

– Choose Base Info. from the navigation tree and set the parameters.

– Number of Pots Ports: 2

– Number of ETH Ports: 4

– Number of CATV Ports: 1

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

5. Confirm the ONT.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

a. In the Main Topology, double-click the required OLT in the Physical Root

navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

b. Choose GPON > GPON Management from the navigation tree.

c. On the GPON UNI Port tab page, set the filter criteria to display the required

GPON UNI ports.

d. In the information list, right-click GPON UNI port 0/2/1 and choose Enable

ONU Auto Find from the shortcut menu.

e. Select the ONU tab page. Click the Auto Discover ONUs tab.

f. In the window that is displayed, select 6877687714852901 as the ONU record

and click Confirm.

– Name: ONT

– ONU ID: 0

– ONU Type: ONT

– On the Basic Parameters tab page, set the parameters.

– Line Profile: FTTx (click

next to Line Profile and select the line profile

named FTTx in the dialog box that is displayed)

– Service Profile: FTTx (click

next to Service Profile and select the

service profile named FTTx in the dialog box that is displayed)

– Authentication Mode: SN

– Terminal Type: 247

– Software Version: V1R002C06 (or V1R002C07)

g. Click OK.

l Configure the Internet service.

The prerequisite for performing operations in the navigation tree is to navigate to the NE Explorer of the OLT. To navigate to the NE Explorer of the OLT, do as follows: In the

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

1. Configure a service VLAN on the OLT side.

A service VLAN is the VLAN used for the Internet service.

a. Choose VLAN from the navigation tree.

b. On the VLAN tab page, right-click and choose Add from the shortcut menu.

c. In the dialog box that is displayed, set the parameters.

– VLAN ID: 100

– Type: Smart VLAN

– Attribute: Stacking

d. Click Next. Click the Upstream Port tab and add upstream port 0/19/0 as the

upstream port of the VLAN.

e. Click Done.

2. Add a service virtual port on the OLT side.

a. On the VLAN tab page, select the record where VLAN ID is set to 100 and click

the ServicePort tab in the lower pane.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

b. In the information list, right-click and choose Add from the shortcut menu.

c. In the dialog box that is displayed, set the parameters.

– Name: HSI

– VlAN Choice: Smart VLAN

– VLAN ID: 100 (SVLAN ID)

– Connection Type: LAN-GPON (when the physical port is a GPON port) or

LAN-EPON (when the physical port is an EPON port)

– Interface Selection: 0/2/1/0/1 (when the connection type is LAN-GPON) or

0/2/1/0 (when the connection type is LAN-EPON)

– Service Type: Multi-Service VLAN

– User VLAN: 10

– Keep the upstream and downstream settings the same: selected

– Upstream Traffic Name: ip-traffic-table_6 (it is recommended that you use

the default profile ip-traffic-table_6 because the OLT does not limit the rates of service streams in the management VLAN)

d. Click OK.

3. Configure the value-added service profile of the ONT.

a. From the main menu, choose Configuration > Access Profile Management. In

the navigation tree of the tab page that is displayed, choose PON Profile > ONT VAS Profile.

b. On the ONT VAS Profile tab page, right-click, and choose Add from the shortcut

menu.

c. In the dialog box that is displayed, set relevant parameters.

– Profile Name: ONT-HSI

– Vendor ID: HWTC(2011)

– Terminal Type: 247

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Version: V1R002C06-Later

d. Configure the working mode of a LAN port.

In the navigation tree, choose LANDevice > LAN Interface 1 > LAN

Interface > LAN Ethernet Configuration 1. Select LAN Ethernet Configuration 1 and set LAN port two three-port enable to enable (indicating

that LAN 1 works in the Layer 3 mode).

NOTE

l If LAN port two three-port enable is disable, the LAN port works in the Layer 2

mode.

l If LAN port two three-port enable is enable, the LAN port works in the Layer 3

mode.

LAN port two three-port enable is defaulted to disable.

By default, the system has one LAN Ethernet Configuration 1 node. To add nodes, select LAN Interface, right-click, and choose Add from the shortcut menu.

e. Configure parameters of a WAN port.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

a. In the navigation tree, choose WAN Device > WAN Device 1 > WAN

Connection. Select WAN Connection, right-click, and choose Add PPP Connection from the shortcut menu.

b. Select WAN PPP Interface 1 and enter (or select) a proper value.

– WAN Interface Name: ONT-HSI

– WAN Enable: enable

– Connection Type: IP_Routed

– NATEnable: Enable (NAT must be enabled to configure the Internet

access service.)

– Service Type: INTERNET (For configuring the Internet access service,

INTERNET or a combination containing INTERNET needs to be selected.)

– VLAN ID: 10 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

– Priority: 1

f. Configure a routing policy.

a. In the navigation tree, choose Layer 3 Forwarding > Policy Route. Select

Policy Route, right-click, and choose Add.

b. Choose Policy Route 1 and enter proper values.

– Physical Port Name: LAN1

– WAN Interface Name: WAN1(ONT-HSI)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

NOTE

To bind a LAN port to a WAN port, set Physical Port Name and WAN Interface Name. The preceding figure shows that WAN 1 is bound to LAN 1.

To bind a WAN port to multiple LAN ports, set Physical Port Name to LAN1,...,LANx. For example, to bind WAN 1 to LAN 1 and LAN 2, set Physical Port Name to LAN1,LAN2.

g. Click OK to complete the configuration of the new profile.

4. Bind the value-added service profile.

a. In the Physical Map navigation tree on the Main Topology tab page, double-

click the target OLT, or select the target OLT, right-click, and choose NE Explorer.

b. In the navigation tree, choose GPON > GPON Management.

c. In the window on the right, choose GPON ONU.

d. On the GPON ONU tab page, set the search criteria to find the GPON ONU

records.

e. Select an ONT from the list, right-click, and choose Bind VAS Profile from the

shortcut menu. In the dialog box that is displayed, choose the created profile, and click OK to complete profile binding.

5. Configure the ONT value-added service.

a. On the GPON ONU tab page, select an ONT, right-click, and choose Configure

Value-Added Service from the shortcut menu.

b. Configure the user name and password for PPPoE dialup.

In the navigation tree, choose WAN Device > WAN Device 1 > WAN

Connection > WAN Connection 1 > WAN PPP Interface > WAN PPP Interface 1. Select WAN PPP Interface 1, and set User Name to iadtest@pppoe and Password to iadtest. The user name and password must be

the same as those configured on the BRAS.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

c. Click OK. In the dialog box that is displayed, click OK. The configurations take

effect without the requirement of resetting the ONT.

----End

Result

Check whether the user successfully gains access to the Internet through dialup on the PC.

1. The LAN port of the ONT is connected to the Ethernet port of the PC properly.

2. After the PC is configured to obtain its IP addresses automatically, the PC can obtain an IP address allocated by the ONT using DHCP.

3. After automatic PPPoE dialup is performed successfully on the ONT, users can access the Internet.

3.2.4 Configuring GPON FTTH Voice Service (H.248 Protocol) on the NMS

This topic describes how to configure the voice service when an ONT is connected to an OLT through a GPON port.

Context

For details of the data plan, see Data Plan.

Example Network

l The phones connected to different ONTs can communicate with each other.

l The ONT obtains an IP address in Dynamic Host Configuration Protocol (DHCP) mode.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

Phone1

SoftX 3000

OLT

Phone2

LAN Switch

U2000

ONT

Optical splitter

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Figure 3-3 Configuring the GPON FTTH voice service (H.248 protocol)

Procedure

l Add the ONT to the U2000 in profile mode.

1. Configure an MEF IP traffic profile.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose Traffic Profile from the navigation tree.

b. Click the MEF IP Traffic Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

– Name: FTTx

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– CIR: 20480

– Outer Priority: 1

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

2. Configure a DBA profile.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the DBA Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Name: FTTx

– T-CONT type: Maximum Bandwidth

– Maximum Bandwidth: 32768

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

3. Configure a line profile.

In a line profile, a GEM port can be bound to up to eight service streams. In a GEM port, different GEM connections need to be set up for different service streams.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the Line Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Set Name to FTTx.

– Choose Base Info. from the navigation tree and set the parameters.

– Mapping Mode: VLAN

– Qos Mode: Priority Queue

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click T-CONT Info. in the navigation tree and choose ADD T-

CONT from the shortcut menu. In the dialog box that is displayed, set the

parameters.

– T-CONT Index: 1

– DBA Profile: FTTx

– Right-click T-CONT1 in the navigation tree and choose Add GEM Port

from the shortcut menu. In the dialog box that is displayed, set the parameters.

– GEM Port Index: 1

– Priority Queue: 1

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set

the parameter.

– GEM Connection Index: 0 (this parameter is set to 0 automatically)

– VLAN ID: 10 (Internet access user-side VLAN ID)

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set the parameter.

– GEM Connection Index: 1 (this parameter is set to 1 automatically)

– VLAN ID: 20 (Voice user-side VLAN ID)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set

the parameter.

– GEM Connection Index: 2 (this parameter is set to 2 automatically)

– VLAN ID: 30 (Multicast user-side VLAN ID)

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

4. Configure a service profile.

The service profile type should be consistent with the actual ONT type.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Product Number of

ETH Ports

Number of POTS Ports

Number of CATV Ports

HG8010 1 - -

HG8110 1 1 -

HG8240 4 2 -

HG8245 4 2 -

HG8247 4 2 1

HG8447 4 4 1

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the Service Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Set Name to FTTx.

– Choose Base Info. from the navigation tree and set the parameters.

– Number of Pots Ports: 2

– Number of ETH Ports: 4

– Number of CATV Ports: 1

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

5. Confirm the ONT.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

a. In the Main Topology, double-click the required OLT in the Physical Root

navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

b. Choose GPON > GPON Management from the navigation tree.

c. On the GPON UNI Port tab page, set the filter criteria to display the required

GPON UNI ports.

d. In the information list, right-click GPON UNI port 0/2/1 and choose Enable

ONU Auto Find from the shortcut menu.

e. Select the ONU tab page. Click the Auto Discover ONUs tab.

f. In the window that is displayed, select 6877687714852901 as the ONU record

and click Confirm.

– Name: ONT

– ONU ID: 0

– ONU Type: ONT

– On the Basic Parameters tab page, set the parameters.

– Line Profile: FTTx (click

next to Line Profile and select the line profile

named FTTx in the dialog box that is displayed)

– Service Profile: FTTx (click

next to Service Profile and select the

service profile named FTTx in the dialog box that is displayed)

– Authentication Mode: SN

– Terminal Type: 247

– Software Version: V1R002C06 (or V1R002C07)

g. Click OK.

l Configure the voice service.

The prerequisite for performing operations in the navigation tree is to navigate to the NE Explorer of the OLT. To navigate to the NE Explorer of the OLT, do as follows: In the

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

NOTE

Some voice parameters cannot be configured on the NMS but can be configured by importing an XML configuration file. For details about how to import an XML configuration file, see 3.6.2 Operation Guide

on the XML Configuration File (on the U2000).

1. Configure a service VLAN on the OLT side.

A service VLAN is the VLAN used for the voice service.

a. Choose VLAN from the navigation tree.

b. On the VLAN tab page, right-click and choose Add from the shortcut menu.

c. In the dialog box that is displayed, set the parameters.

– VLAN ID: 200

– Type: Smart VLAN

d. Click Next.

e. Click the Upstream Port tab and add upstream port 0/19/0 as the upstream port

of the VLAN.

f. Click Done.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

2. Add a service virtual port on the OLT side.

a. On the VLAN tab page, select the record where VLAN ID is set to 200 and click

the ServicePort tab in the lower pane.

b. In the information list, right-click and choose Add from the shortcut menu.

c. In the dialog box that is displayed, set the parameters.

– Name: VOIP

– VlAN Choice: Smart VLAN

– Connection Type: LAN-GPON (when the physical port is a GPON port) or

LAN-EPON (when the physical port is an EPON port)

– Interface Selection: 0/2/1/0/1 (when the connection type is LAN-GPON) or

0/2/1/0 (when the connection type is LAN-EPON)

– Vlan ID: 200 (SVLAN ID)

– Service Type: Multi-Service VLAN

– User VLAN: 20 (CVLAN ID)

– Keep the upstream and downstream settings the same: selected

– Upstream Traffic Name: FTTx

d. Click OK.

3. Configure the value-added service profile of the ONT.

a. From the main menu, choose Configuration > Access Profile Management. In

the navigation tree of the tab page that is displayed, choose PON Profile > ONT VAS Profile.

b. On the ONT VAS Profile tab page, right-click, and choose Add from the shortcut

menu.

c. In the dialog box that is displayed, set relevant parameters.

– Profile Name: ONT-VoIP

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Vendor ID: HWTC(2011)

– Terminal Type: 247

– Version: V1R002C06-Later

d. Configure the parameters of the voice WAN port.

a. In the navigation tree, choose WAN Device > WAN Device 1 > WAN

Connection. Select WAN Connection, right-click, and choose Add IP Connection from the shortcut menu.

b. Select WAN IP Interface 1 and enter (or select) a proper value.

– WAN Interface Name: ONT-VoIP

– WAN Enable: enable

– Connection Type: IP_Routed

– VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

– Priority: 6

– Addressing Type: DHCP

– Service List: VOIP (For configuring the VoIP service, VoIP or a

combination containing VoIP needs to be selected.)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

e. Configure the voice protocol parameters.

In the navigation tree, choose Services > Voice Service > Voice Service 1 > Interface configuration > Interface 1. Select Interface 1 and select a proper value.

– Signaling Protocol: H248

– Region: China

– Associate WAN Interface: WAN1(ONT-VoIP) (binding the created voice

WAN port)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

NOTE

If the upper-layer network requires isolation of media streams from signaling streams, create different traffic streams for the media streams and signaling streams on the OLT, create a WAN port named WAN-RTP on the ONT, and set this WAN port to a media WAN port. Specifically, choose Interface 1 > RTP and set Associate WAN Interface to WAN2(WAN- RTP).

f. Configure the MGC parameters.

In the navigation tree, choose Services > Voice Service > Voice Service 1 > Interface configuration > Interface 1 > H248. Select H248 and enter (or select) a proper value.

– Primary MGC: 200.200.200.200

– MID Format: Domain name

NOTE

l If dual-homing is configured, Secondary MGC must be set.

l MID Format can be set to Domain Name, IP, or Device name.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

g. Configure the voice users.

a. In the navigation tree, choose Services > Voice Service > Voice Service

1 > Interface configuration > Interface 1 > User. Select User, right-click, and choose Add from the shortcut menu.

NOTE

l The HG8010 does not support voice services.

l The HG8110 supports one user.

l The HG8240/HG8245/HG8247 supports a maximum of two users.

b. Click User 1 below User and set Interface ID to 1. Click User 2 below

User and set Interface ID to 2.

NOTE

If Interface ID is 1, port TEL1 on the ONT is bound. If Interface ID is 2, port TEL2 on the ONT is bound.

h. Click OK to complete the configuration of the new profile.

4. Bind the value-added service profile.

a. In the Physical Map navigation tree on the Main Topology tab page, double-

click the target OLT, or select the target OLT, right-click, and choose NE Explorer.

b. In the navigation tree, choose GPON > GPON Management.

c. In the window on the right, choose GPON ONU.

d. On the GPON ONU tab page, set the search criteria to find the GPON ONU

records.

e. Select an ONT from the list, right-click, and choose Bind VAS Profile from the

shortcut menu. In the dialog box that is displayed, choose the created profile, and click OK to complete profile binding.

5. Configure the ONT value-added service.

a. On the GPON ONU tab page, select an ONT, right-click, and choose Configure

Value-Added Service from the shortcut menu.

b. Configure the domain name of the MG.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

In the navigation tree, choose Services > Voice Service > Voice Service 1 >

Interface configuration > Interface 1 > H248. Select H248 and set Domain name to 6877687714852901.

NOTE

Domain Name is ONT's domain name registered on the MGC. It is globally unique. Domain Name in this example is ONT's SN.

c. Configure the terminal ID for the H.248 voice user.

In the navigation tree, choose Services > Voice Service > Voice Service 1 > Interface configuration > Interface 1 > User.

a. Click User 1 > H248 and set TID to A0.

b. Click User 2 > H248 and set TID to A1.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

NOTE

The terminal IDs A0 and A1 must be consistent with the corresponding configuration on the MGC.

d. Click OK. In the dialog box that is displayed, click OK. The configurations take

effect without the requirement of resetting the ONT.

----End

Result

Check whether the telephone functions properly. Connect two common telephones phone 1 and phone 2 to two TEL ports on the ONT and test the dialing between phone 1 and phone 2. In normal cases:

l The caller hears the dialing tone after taking the phone off the hook.

l When the caller dials the telephone number of the callee, the phone of the callee rings

successfully, and the caller hears the ring back tone.

l The caller and the callee communicate with each other successfully.

l After the callee hangs up, the caller hears the busy tone.

3.2.5 Configuring GPON FTTH Voice Service (SIP Protocol) on the NMS

This topic describes how to configure the voice service when an ONT is connected to an OLT through a GPON port.

Example Network

l The phones connected to different ONTs can communicate with each other.

l The ONT obtains an IP address in DHCP mode.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

Phone1

OLT

Phone2

LAN Switch

U2000

ONT

Optical splitter

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Figure 3-4 Configuring the GPON FTTH voice service (SIP protocol)

Procedure

l Add the ONT to the U2000 in profile mode.

1. Configure an MEF IP traffic profile.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose Traffic Profile from the navigation tree.

b. Click the MEF IP Traffic Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

– Name: FTTx

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– CIR: 20480

– Outer Priority: 1

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

2. Configure a DBA profile.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the DBA Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Name: FTTx

– T-CONT type: Maximum Bandwidth

– Maximum Bandwidth: 32768

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

3. Configure a line profile.

In a line profile, a GEM port can be bound to up to eight service streams. In a GEM port, different GEM connections need to be set up for different service streams.

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the Line Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Set Name to FTTx.

– Choose Base Info. from the navigation tree and set the parameters.

– Mapping Mode: VLAN

– Qos Mode: Priority Queue

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click T-CONT Info. in the navigation tree and choose ADD T-

CONT from the shortcut menu. In the dialog box that is displayed, set the

parameters.

– T-CONT Index: 1

– DBA Profile: FTTx

– Right-click T-CONT1 in the navigation tree and choose Add GEM Port

from the shortcut menu. In the dialog box that is displayed, set the parameters.

– GEM Port Index: 1

– Priority Queue: 1

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set

the parameter.

– GEM Connection Index: 0 (this parameter is set to 0 automatically)

– VLAN ID: 10 (Internet access user-side VLAN ID)

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set the parameter.

– GEM Connection Index: 1 (this parameter is set to 1 automatically)

– VLAN ID: 20 (Voice user-side VLAN ID)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Right-click GEM Port1 in the navigation tree and choose Add GEM

Connection from the shortcut menu. In the dialog box that is displayed, set

the parameter.

– GEM Connection Index: 2 (this parameter is set to 2 automatically)

– VLAN ID: 30 (Multicast user-side VLAN ID)

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

4. Configure a service profile.

The service profile type should be consistent with the actual ONT type.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Product Number of

ETH Ports

Number of POTS Ports

Number of CATV Ports

HG8010 1 - -

HG8110 1 1 -

HG8240 4 2 -

HG8245 4 2 -

HG8247 4 2 1

HG8447 4 4 1

a. Choose Configuration > Access Profile Management from the main menu. In

the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.

b. Click the Service Profile tab.

c. Right-click and choose Add Global Profile from the shortcut menu.

d. In the dialog box that is displayed, set the parameters.

– Set Name to FTTx.

– Choose Base Info. from the navigation tree and set the parameters.

– Number of Pots Ports: 2

– Number of ETH Ports: 4

– Number of CATV Ports: 1

e. Click OK.

f. In the information list, right-click the record and choose Download to NE from

the shortcut menu.

g. In the dialog box that is displayed, select the required NE(s), and click OK.

5. Confirm the ONT.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

a. In the Main Topology, double-click the required OLT in the Physical Root

navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

b. Choose GPON > GPON Management from the navigation tree.

c. On the GPON UNI Port tab page, set the filter criteria to display the required

GPON UNI ports.

d. In the information list, right-click GPON UNI port 0/2/1 and choose Enable

ONU Auto Find from the shortcut menu.

e. Select the ONU tab page. Click the Auto Discover ONUs tab.

f. In the window that is displayed, select 6877687714852901 as the ONU record

and click Confirm.

– Name: ONT

– ONU ID: 0

– ONU Type: ONT

– On the Basic Parameters tab page, set the parameters.

– Line Profile: FTTx (click

next to Line Profile and select the line profile

named FTTx in the dialog box that is displayed)

– Service Profile: FTTx (click

next to Service Profile and select the

service profile named FTTx in the dialog box that is displayed)

– Authentication Mode: SN

– Terminal Type: 247

– Software Version: V1R002C06 (or V1R002C07)

g. Click OK.

l Configure the voice service.

The prerequisite for performing operations in the navigation tree is to navigate to the NE Explorer of the OLT. To navigate to the NE Explorer of the OLT, do as follows: In the

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

NOTE

on the XML Configuration File (on the U2000).

1. Configure a service VLAN on the OLT side.

A service VLAN is the VLAN used for the voice service.

a. Choose VLAN from the navigation tree.

b. On the VLAN tab page, right-click and choose Add from the shortcut menu.

c. In the dialog box that is displayed, set the parameters.

– VLAN ID: 200

– Type: Smart VLAN

d. Click Next.

e. Click the Upstream Port tab and add upstream port 0/19/0 as the upstream port

of the VLAN.

f. Click Done.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

2. Add a service virtual port on the OLT side.

a. On the VLAN tab page, select the record where VLAN ID is set to 200 and click

the ServicePort tab in the lower pane.

b. In the information list, right-click and choose Add from the shortcut menu.

c. In the dialog box that is displayed, set the parameters.

– Name: VOIP

– VlAN Choice: Smart VLAN

– Connection Type: LAN-GPON (when the physical port is a GPON port) or

LAN-EPON (when the physical port is an EPON port)

– Interface Selection: 0/2/1/0/1 (when the connection type is LAN-GPON) or

0/2/1/0 (when the connection type is LAN-EPON)

– Vlan ID: 200 (SVLAN ID)

– Service Type: Multi-Service VLAN

– User VLAN: 20 (CVLAN ID)

– Keep the upstream and downstream settings the same: selected

– Upstream Traffic Name: FTTx

d. Click OK.

3. Configure the value-added service profile of the ONT.

a. From the main menu, choose Configuration > Access Profile Management. In

the navigation tree of the tab page that is displayed, choose PON Profile > ONT VAS Profile.

b. On the ONT VAS Profile tab page, right-click, and choose Add from the shortcut

menu.

c. In the dialog box that is displayed, set relevant parameters.

– Profile Name: ONT-VoIP

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

– Vendor ID: HWTC(2011)

– Terminal Type: 247

– Version: V1R002C06-Later

d. Configure the parameters of the voice WAN port.

a. In the navigation tree, choose WAN Device > WAN Device 1 > WAN

Connection. Select WAN Connection, right-click, and choose Add IP Connection from the shortcut menu.

b. Select WAN IP Interface 1 and enter (or select) a proper value.

– WAN Interface Name: ONT-VoIP

– WAN Enable: enable

– Connection Type: IP_Routed

– VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

– Priority: 6

– Addressing Type: DHCP

– Service List: VOIP (For configuring the VoIP service, VoIP or a

combination containing VoIP needs to be selected.)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

e. Configure voice protocol parameters.

In the navigation tree, choose Services > Voice Service > Voice Service 1 > Interface configuration > Interface 1. Select Interface 1 and select a proper value.

– Signaling Protocol: SIP

– Region: China

– Associate WAN Interface: WAN1(ONT-VoIP) (binding the created voice

WAN port)

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

NOTE

f. Configure SIP protocol parameters.

In the navigation tree, choose Services > Voice Service > Voice Service 1 > Interface configuration > Interface 1 > SIP. Select SIP and enter (or select) a proper value.

– Proxy Server: 200.200.200.200

– Home Domain: softx3000.huawei.com

NOTE

If dual-homing is configured, Secondary Proxy Server must be set.

g. Configure the voice users.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/ HG8447 GPON Terminal Service Manual 3 Configuration

a. In the navigation tree, choose Services > Voice Service > Voice Service

1 > Interface configuration > Interface 1 > User. Select User, right-click, and choose Add from the shortcut menu.

NOTE

l The HG8010 does not support voice services.

l The HG8110 supports one user.

l The HG8240/HG8245/HG8247 supports a maximum of two users.

b. Click User 1 below User and set Interface ID to 1. Click User 2 below

User and set Interface ID to 2.

NOTE

If Interface ID is 1, port TEL1 on the ONT is bound. If Interface ID is 2, port TEL2 on the ONT is bound.

h. Click OK to complete the configuration of the new profile.

4. Bind the value-added service profile.

a. In the Physical Map navigation tree on the Main Topology tab page, double-

click the target OLT, or select the target OLT, right-click, and choose NE Explorer.

b. In the navigation tree, choose GPON > GPON Management.

c. In the window on the right, choose GPON ONU.

d. On the GPON ONU tab page, set the search criteria to find the GPON ONU

records.

e. Select an ONT from the list, right-click, and choose Bind VAS Profile from the

shortcut menu. In the dialog box that is displayed, choose the created profile, and click OK to complete profile binding.

5. Configure ONT value-added services.

a. On the GPON ONU tab page, select an ONT, right-click, and choose Configure

Value-Added Service from the shortcut menu.

b. Configure parameters of the SIP-based voice users.

Issue 02 (2011-12-08) Huawei Proprietary and Confidential

Huawei EchoLife HG8010, EchoLife HG8110, EchoLife HG8240, EchoLife HG8245, EchoLife HG8247 Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

About This Document

Contents

1 Safety Precautions

2 System Overview

2.1 Product Introduction

2.1.1 Appearance

2.1.2 Ports

2.1.3 LEDs

2.2 Typical Network Applications

3 Configuration

3.1 Before Your Start

3.2 Configuring the Service by Using the NMS

3.2.1 Data Plan

3.2.2 Configuring GPON FTTH Layer 2 Internet Access Service on the NMS

3.2.3 Configuring GPON FTTH Layer 3 Internet Access Service on the NMS

3.2.4 Configuring GPON FTTH Voice Service (H.248 Protocol) on the NMS

3.2.5 Configuring GPON FTTH Voice Service (SIP Protocol) on the NMS